2011 Peugeot 508 Owner's Manual

255
05
2 1
1
2
3
TRAFFIC INFORMATION







PRINCIPAL TMC SYMBOLS


Red and yellow triangle: traffi c information, for example:
Black and blue triangle: general information, for example:
Weather reports
Modifi ed signage
Risk of explosion Traffi c reports
Narrow carriageway
Road closed Wind
Slippery surface
Demonstration Fog
Accident
Danger Parking
Delay
No entry Snow/ice
Roadworks
Traffi c jam








RECEIVING TA MESSAGES


The TA (Traffi c Announcement) function gives priority to TA alert
messages. To operate, this function needs good reception of a radio
station transmitting this type of message. When a traffi c report is
transmitted, the current audio source (Radio, CD, USB, ...) is interrupted
automatically to play the TA message. Normal playback of the audio
source resumes at the end of the transmission of the message.

Press RADIO
to display the
" FM/AM band
" menu.

Select " Guidance options
" then
confi rm.

Select " Activate/Deactivate TA
" then
confi rm.

The volume setting for TA mesages can be adjusted only during the
transmission of this type of alert.

256
06 USING THE TELEPHONE


Access to the "TELEPHONE" menu


" Phone
"

" Dial
"
" Directory of contacts
" (telephone number)
" Call list
"
" Phone functions
"
" Bluetooth functions
"
Press PHONE
.

In " Call list
", select a number in the list and confi rm OK
to
start the call.

Connecting a different telephone deletes the list of
recent calls. No telephone connected.
Telephone connected.
Incoming call.
Outgoing call.
Synchronization
of address book in
progress.
Telephone call in
progress.

In the top bar of the permanent
display
Calls received.
Calls sent.

257
1
2
5
6
3
4
06















PAIRING A BLUTOOTH TLEPHONE
FIRST CONNECTION
For reasons of safety and because they require prolonged attention
on the part of the driver, the operations for pairing the Bluetooth
mobile telephone to the hands-free system of the audio unit must be
carried out with the vehicle stationary
.

Activate the telephone's Bluetooth
function and ensure that it is "shown to
all" (telephone confi guration).

Press PHONE
.
Select the name of the desired
peripheral from the list of devices
detected then select " Connect
" and
confi rm.

The system offers to connect the
telephone:


- in " Hands-free mode
"
(telephone only),

- in " Audio
" mode (streaming: playing
music fi les on the telephone),

- or " All
" (for selection of both
modes).
Select " OK
" and confi rm.
Select " Bluetooth functions
"
and confi rm.
Select " Peripherals search
" and
confi rm.
The list of peripherals detected is
displayed. Wait until the " Connect
"
button is available.

USING THE TELEPHONE

Visit www.peugeot.co.uk for more information
(compatibility, additional help, ...).

258
8
06
7

Enter the same code on the telephone then accept
the connection.
Then accept automatic connection on the telephone to allow the
telephone to reconnect automatically every time the vehicle is
started.



On return to the vehicle,the last telephone connected
automatically reconnects, within around 30 seconds after
switching on the ignition (Bluetooth activated and visible).
To modify the automatic connection mode, remove the pairing and
pair the telephone again with the desired mode.


USING THE TELEPHONE


The " Hands-free mode
" should be used in preference if
"Streaming" is not desired.
The services available depend on the network, the SIM card and the compatibility of the Bluetooth telephone used. Check the telephone
manual and with your network provider for details of the services available to you.

The ability of the system to connect in only one mode depends on
the telephone. The two modes may both connect by default.

Select a code for the connection then
confi rm " OK
".

259
1
2
2
3
1
3
4
06 USING THE TELEPHONE


Press PHONE
.

Select " Dial
" then confi rm.
Select " Directory of contacts
" then
confi rm.

Dial the telephone number using the
virtual keypad selecting each number
in turn.
Confi rm " OK
" to make the call.

Press PHONE
or make long press on
TEL
.
CALLING A NEW NUMBER

CALLING A CONTACT

Select the desired contact and confi rm.

Select the number and confi rm to start
the call.








MAKING A CALL

Use of the telephone is not recommended while driving. We
recommended that you park safely or make use of the steering
mounted controls.

260
1
2
06
1
USING THE TELEPHONE



CALLING A RECENTLY DIALLED NUMBER

Press PHONE
or make a long press on
TEL
, select " Call list
" and confi rm,

Select the desired number and confi rm.

To erase the calls log, press PHONE
, select " Phone functions
"
and confi rm then select " Delete calls log
" and confi rm.


ENDING A CALL


Press HANG UP



or
Or make a long press on the steering
mounted TEL
button.


It is still possible to make a call directly from the telephone; park
the vehicle fi rst as a safety measure.

261
1
2
06 USING THE TELEPHONE


RECEIVING A CALL


An incoming call is announced by a ring and a superimposed display
in the screen.


"Yes
" to accept the call is selected by
default.
Press " OK
" to accept the call.
Select " No
" and confi rm to reject the
call.

A short press on TEL
or PHONE

accepts an incoming call.
A long press on TEL
or PHONE
or a
press on HANG UP
rejects an incoming
call.

262
1
2a
2b
2c
2d
06 USING THE TELEPHONE


OPTIONS DURING A CALL *


During a call, press the MODE
button
several times to select display of the
telephone screen, then press " OK
" to
open the contextual menu.

Select " Private mode
" and confi rm to
take the call on the handset.
Or select " Hands-free mode
" and
confi rm to take the call via the vehicle's
speakers.

Select " Put call on hold
" and confi rm to
put the current call on hold.
Or select " Resume the call
" and
confi rm to resume the call on hold.
Select " DTMF ring tones
" to use the
numerical keypad, so as to navigate
through the menu of an interactive vocal
server.

Select " Hang up
" to end the call.

* Depending on the compatibility of the phone and your service plan.
it is possible to hold a 3-way conference call by making 2 calls
in succession. Select " Conference

mode call
" in the contextual
menu accessible using the TEL
button at the steering mounted
controls.