2011 Peugeot 508 Owner's Manual

287

The system is coded in such a way that it will only
operate in your vehicle. If it is to be installed in another
vehicle, contact your PEUGEOT dealer for confi guration
of the system.







AUDIO SYSTEM/BLUETOOTH

01 First steps


For safety reasons, the driver must only carry out
operations which require prolonged attention while the
vehicle is stationary.
When the engine is switched off and to prevent
discharging of the battery, the audio system may switch
off after a few minutes.



CONTENTS

02 Steering mounted controls

03 Main menu

04 Audio

05 Using the telephone

06 Audio settings

07 Configuration

08 Trip computer

09 Screen menu maps

Frequently asked questions p.
p.
p.
p.
p.
p.
p.
p.
p.
p.
288
289
290
291
301
309
310
311
312
314

288
01
1
274
5
6
3
8910
1311
1214
FIRST STEPS



1. On/Off and volume adjustment.

2. CD eject.

3. Selection of the display on the screen from
the following modes:
Full screen: Audio (or if a telephone call is in
progress)/
New window: Audio (or telephone if a call is
in progress) - Time or Trip computer
Long press: black screen (DARK).

4. Selection of source:
Radio, CD, AUX, USB, Streaming.
Accept an incoming call.

5. Selection of FM1, FM2, DAB and AM
wavebands.
6. Buttons 1 to 6:
Selection of a preset radio station.
Long press: preset a station.

7. Display the list of stations received, the
CD/MP3 tracks or folders.
Long press: MP3/WMA fi le order/update the
list of stations received.

8. TA (Traffi c Announcement)
function on/off.
Long press: access to the type of information.

9. Confi rmation or display of contextual menu.

10. Abandon current operation
Up one level (menu or folder).
11. Automatic search for a lower/higher radio
frequency.
Selection of previous/next CD, USB,
streaming track.
Navigation in a list.

12. Manual step by step search for a lower/
higher radio frequency.
Selection of the previous/next MP3 folder.
Selection of the previous/next USB device
folder/genre/artist/playlist.
Navigation in a list.

13. Main menu.

14. Audio settings:
equalizer, treble, bass, loudness,
distribution, left/right balance, front/rear,
automatic volume.

02
289
STEERING MOUNTED CONTROLS



- Press: access to the instrument
panel screen menu.

- Rotation: navigation in the
instrument panel screen menu.


- Increase volume.


- Mute/restore sound.


- Decrease volume.

- Rotation:
Radio: search for previous/next
station.
Media: previous/next track.
Press: confi rmation.


-
Change the audio source.
Long press: mute.

- Accept an incoming call.

- Access to the Telephone menu if a
call is in progress.


- Long press: reject an incoming call or
end a call in progress.

- Long press: access to the "Telephone"
menu if no call in progress.


- Select the type of permanent display
on the screen between window and
full screen modes.

- Long press: black screen (DARK).



- Radio: display the list of stations.
Media: display the list of tracks.
Long press: update the list of
stations received.

290
03

" Multimedia
": Media parameters,
Radio parameters.

" Telephone
": Call, Directory
management, Telephone
management, Hang up.

For a detailed global view of the menus
available, refer to "Screen menu maps"
in this section.













> SCREEN C

" Bluetooth connection
":
Connections management, Search
for a device.

MAIN MENU

291
1
2
04 AUDIO


Press SOURCE
several times in
succession and select radio.

Press BAND
to select a waveband
among: FM1, FM2, DAB (digital radio),
AM.
Press LIST
to display the list of stations
received in alphabetical order.

A press changes to the next or previous
letter (e.g. A, B, D, F, G, J, K, ...).







RADIO


Select the desired radio station and
confi rm by pressing OK
.
SELECTING A STATION

A long press on LIST
builds or updates
the list of stations; audio reception is cut
momentarily.

The exterior environment (hills, buildings, tunnel, car park, below
ground...) may prevent reception, even in RDS station tracking
mode. This phenomenon is normal in the propagation of radio
waves and is in no way indicative of a fault with the audio system.

292
1
2
04
1
1
2

RDS, if displayed, enables you to continue listening to the same
station by automatic retuning to alternative frequencies. However,
in certain conditions, coverage of an RDS station may not be
assured throughout the country as radio stations do not cover
100 % of the territory. This explains the loss of reception of the
station during a journey.


AUDIO


RDS





RECEIVING TA MESSAGES


The TA (Traffi c Announcement) function gives priority to TA alert
messages. To operate, this function needs good reception of a
radio station transmitting this type of message. When a traffi c
report is transmitted, the current audio source (Radio, CD,
USB, ...) is interrupted automatically to play the TA message.
Normal playback of the audio source resumes at the end of the
transmission of the message.

Press TA INFO
to activate or deactivate
the reception of traffi c messages.


When the radio is displayed on the
screen, press OK
to display the
contextual menu.

Select " RDS
" and confi rm to save.
" RDS
" is displayed in the screen.
The INFO function gives priority to TA alert messages. To be active,
this function needs good reception of a radio station that transmits this
type of message. When a message is transmitted, the current audio
source (Radio, CD, USB, ...) is interrupted automatically to receive
the INFO message. Normal play resumes at the end of the message
transmission.

Make a long press on TA INFO
to
display the list of categories.

LISTENING TO INFO MESSAGES

Select or deselect categories to activate
or deactivate the reception of the
corresponding messages.

293
1
2
04 AUDIO


Radio text is information transmitted by the radio station related to the current programme or song.

With the radio displayed on the screen,
press OK
to display the contextual
menu.

Select " RadioText (TXT) display
" and
confi rm OK
to save.



DISPLAY RADIO TEXT


Screen C

294
04
1
2
3
AUDIO







AUDIO CD


Insert 12 cm diameter circular compact discs only.
Some anti-pirating systems, on original discs or CDs copied using a
personal recorder, may cause faults which are no refl ection on the
quality of the original player.
Without pressing the EJECT
button, insert a CD in the player, play
begins automatically.

To play a disc which has already been
inserted, press the SOURCE
button
several times in succession and
select " CD
".

Press one of the buttons to select a
track on the CD.
PLAYING A CD

Press LIST
to display the list of tracks
on the CD.

Press and hold one of the buttons for
fast forward or backward.