2010 SUBARU FORESTER Navigation Manual

Navigation 51
Route Options
3
Select (calculate)
4
Select (start).
DetourYou can specify a detour distance from your current position. The sys-
tem will calculate an alternative route according to the distance specifi-
cation, enabling you to take a detour.1
Press the button, then select (route
options), and then select (detour).
2
Select a detour distance using , , ,
or (whole route).The system will then calculate an alternative route that detours
from the current location within the specified distance.
When driving on the freeway, make a selection from among
, 15 mi, 25 mi and .
3
Select (start).
NOTE
If you are driving off the route, it is not possible to calculate a detour route.

52 NavigationRoute OptionsRoute preferencesUse this function to specify preferred route search conditions. The sys-
tem will start recalculating the route according to your specified condi-
tions.1
Press the button, then select (route
options), and then select (route preferences).
2
Specify conditions by selecting keys.Each time you select a key, it will toggle between "usage" and
"non-usage" of the corresponding roads or ferries.
3
Select (calculate).
NOTE
•The (calculate) key can be selected during route guidance.
•The route calculation will not always be able to follow the specified condi-
tions.
Destination and waypointsYou can change the destination or waypoints for the route calculation
by using this function.■Addition of waypointsUse the following procedure to add new waypoints to the current route
for recalculation.1
Press the button, then select (route
options), and then select (destination and way-
points).
2
Select (add).

Navigation 53
Route Options
3
Set a waypoint using any method available from the
screen.
4
Specify the order in which all the set waypoints are to be
visited. Choose the location of the waypoint to be added, and then
select (add).
5
Select (calculate).
NOTE
•When a new destination is set using (destination), it will replace the
current destination and the route calculation will be carried out again.
•Step 4 must be performed for the second and any subsequent waypoints.
•Repeat Steps 1 to 4 for each waypoint to be set.■Modifying destination or waypoint positionsUse this procedure to modify the destination or waypoint positions. The
screen will display the calculated route and the positions of the destina-
tion or waypoints that you will be able to modify.1
Press the button, then select (route
options), and then select (destination and way-
points).
2
Select (list).
3
Select (change location).

54 NavigationRoute Options4
Select the key corresponding to the location that is to be
modified. The map for the area around your current location will be dis-
played.
5
Scroll the map to bring the crosshair to the location
and then select .
6
Select (calculate).
■Modifying visiting order
You can change the order for visiting your waypoints by using this pro-
cedure.1
Press the button, then select (route
options), and then select (destination and way-
points)
2
Select (list).
3
Select the waypoint keys according to the order of your
visit.If you wish to cancel the visiting order number indication, select
(undo).
4
When you complete the sequencing, the visiting order
will be updated automatically.
5
Select .
6
Select
(calculate).

Navigation 55
Route Options
■Deleting destination or waypointsUse this procedure when you wish to delete the previously set destina-
tion or waypoint.1
Press the button, then select (route
options), and then select (destination and way-
points).
2
Select (delete).
3
Select the key corresponding to the destination or way-
point you wish to delete.
4
Confirmation message will be displayed. Select
(yes).Select (no) to cancel the deletion.
5
Select (calculate).

56 NavigationRoute Options■Deleting destination and all waypointsYou can delete the destination and all previously set waypoints in a sin-
gle process.1
Press the button, then select (route
options), and then select (destination and way-
points).
2
Select (delete all).
3
Confirmation message will be displayed. Select
(yes).Select (no) to cancel the deletion.
Display routeUse this function to display the entire route. You can also specify an area
you wish to avoid and prompt the system to recalculate the route
accordingly.1
Press the button, then select (route
options), and then select (display route).
2
Select (turn list).The entire route screen will appear and then it will change to the
Turn List screen.

Navigation 57
Route Options
(avoid):
Select this key if you wish to specify any areas to avoid from the
list of street names.
(Reroute):
The system will recalculate the route.
If the data for the route cannot be shown on one screen, scroll the
screen using the and keys.
3
When the Reroute is selected: Select (start).
Route previewThe system can show you an automated simulation of the calculated route.1
Press the button, then select (route
options), and then select(route preview).
2
Start the simulation drive according to the calculated
route using the keys on the screen as follows:
: Move to the start point.: The simulation drive will start toward the start point. After the
start, this key will be displayed as ,and when it is
selected, the simulation drive will switch to high-speed driving.: The simulation drive will stop.
: The simulation drive will start toward the destination.
After the start, this key will be displayed as , and
when it is selected, the simulation drive will switch to
high-speed driving.

58 NavigationRoute Options
: Move to the destination.
: The EDIT ROUTE PREVIEW screen will be displayed. (See
Page 58.)
NOTE
The visual speed of the simulation vehicle varies with the map scale selected.
The speed appears to be faster with a wide-area map than with a zoom-in map.
■Setting conditions for simulation driveYou can change the simulation drive conditions using this procedure.1
Press the button, then select (route
options), and then select(route preview).
2
Select (edit).The EDIT ROUTE PREVIEW screen will appear.
(to destination or next waypoint):
The simulation drive will stop at the destination or the next way-
point.
(to next POI):
The simulation drive will stop at a point of interest that has been
set up on the route.
(delete):
A selected POI will be deleted.