2009 SUBARU TRIBECA torque

SE-17
Third-row Seats
SEATS
4. Third-row Seats
A: REMOVAL
1) Lift up the front side of the 3rd seat cushion and
then remove the hooks.
2) Lift up the 3rd seat cushion and remove the seat
cushion by pushing it backward to detach the hook.
3) Remove the eight bolts securing the 3rd seat
back.
4) Remove the 3rd seat.
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
Refer to “COMPONENT” of “General Descrip-
tion”. Description.>
C: DISASSEMBLY
1) Remove the 3rd seat. AL, Third-row Seats.>
2) Remove the headrest.
3) Pull out the seat belt tray.
4) Remove the hog rings (A) on the rear side of
seat cushion.
5) Remove the hog rings (A) on the front side of
seat cushion.
6) Remove the two screws securing the hinge lever
assembly.
7) Disconnect the wire connected to the hinge lever
assembly.
8) Remove the seat back cover.
SE-00621
SE-00622
SE-00623: (A)
SE-00624: (A)
SE-00625
SE-00626

SE-18
Third-row Seats
SEATS
9) Remove the hog rings (A) and hooks at the rear
face of the backrest.
10) Remove the hooks which secure the seat back
to the frame.
11) Remove the hog rings on the rear side of seat
back.
12) Remove the seat back cover.
13) Pull out the frame from the seat back cushion.
D: ASSEMBLY
CAUTION:
•Be careful not to stain or damage the back-
rest cover during assembly.
•Always use new hog rings.
•Secure the hog ring using hog ring pliers.
•Install the hog rings to the specified points
securely and make sure that no wrinkle or twist-
ing on backrest cover.
Assemble in the reverse order of disassembly.
1) Assemble the seat cushion in the reverse order
of disassembly.
2) Assemble the backrest in the reverse order of
disassembly.
3) Assemble each inner belt assembly and each
cover in the reverse order of removal.
Tightening torque:
Refer to “COMPONENT” of “General Descrip-
tion”. Description.>
E: INSPECTION
Check that no tear or fray on the seat cover.
: (A)SE-00627
SE-00628
SE-00629: (A)

SL-2
General Description
SECURITY AND LOCKS
1. General Description
A: COMPONENT
1. DOOR LOCK ASSEMBLY
(A) Front (B) Rear

(1) Inner remote ASSY (6) Rear door latch and door lock
actuator ASSY
Tightening torque: N·m (kgf-m, ft-lb)
(2) Front door latch and door lock
actuator ASSY
T1: 6.5 (0.66, 4.8)
(7) Door outer handle coverT2: 7.5 (0.76, 5.5)
(3) Door outer handle (8) Door outer handle spacerT3: 18 (1.8, 13.3)
(4) Key cylinder (switch) (9) Door outer handle frame ASSY
(5) Striker
SL-00436
(9)
T1
(B)
(A)
T3
(5)
(9)
(2)
(1)
(1)
T3
(5)
(6)
T2
T1
(3)
(7)(4)
(8)
T2
(3)
(7)
T2
T2
(8)T2
T2

SL-3
General Description
SECURITY AND LOCKS
2. REAR GATE LOCK
(1) Rear gate actuator Tightening torque: N·m (kgf-m, ft-lb)
(2) Rear gate latch T1: 18 (1.8, 13.3)
(3) Striker T2: 25 (2.5, 18.4)
SL-00437
T2
(1)
(2)
(3)
T1

SL-4
General Description
SECURITY AND LOCKS
3. FRONT HOOD LOCK AND REMOTE OPENERS
(A) Fuel lid (B) Hood

(1) Front hood lock assembly (6) Pull handle ASSYTightening torque: N·m (kgf-m, ft-lb)
(2) Cable assembly, front hood (7) Hood operation leverT1: 33.0 (3.36, 24.3)
(3) Cable assembly, fuel T2: 7.5 (0.76, 5.5)
(4) Pull lever T3: 4.5 (0.46, 3.3)
(5) Cover T4: 25 (2.55, 18.4)
SL-00438
(2)
T1
T1
(6)
(3)
(7)
(1)
(5)
(A)(B)
(4)
T2
T3T4

SR-2
General Description
SUNROOF/T-TOP/CONVERTIBLE TOP (SUNROOF)
1. General Description
A: COMPONENT
(1) Glass lid (5) Drain tubeTightening torque: N·m (kgf-m, ft-lb)
(2) Weather strip (6) Motor ASSYT1: 4.5 (0.46, 3.3)
(3) Cover (7) Frame ASSYT2: 6.0 (0.61, 4.4)
(4) Sunshade (8) Deflector
SR-00125
(1)
(2)
(3)
(4)
(5)
(5)
(6)
(7)
T1(8)
T2
T2
T2

WW-2
General Description
WIPER AND WASHER SYSTEMS
1. General Description
A: SPECIFICATION
B: COMPONENT
1. FRONT WIPER
Fr o nt wi pe r mo t or In p ut 1 2 V — 72 W o r le ss
Rear wiper motor Input 12 V — 42 W or less
Fr o nt wa sh er mo t o rPump type Centrifugal
Input 12 V — 36 W or less
Rear washer motorPump type Centrifugal
Input 12 V — 36 W or less
(1) Wiper rubber (4) Wiper link ASSYTightening torque: N·m (kgf-m, ft-lb)
(2) Wiper blade ASSY (5) Wiper motor ASSYT1: 6.0 (0.61, 4.4)
(3) Wiper arm T2: 20 (2.0, 14.5)
WW-00351
T1
T1
T1
T2
T2
(3)
(3)
(2)
(2)(1)
(4)
(5)
(1)

WW-3
General Description
WIPER AND WASHER SYSTEMS
2. REAR WIPER
(1) Wiper rubber (4) Wiper arm coverTightening torque: N·m (kgf-m, ft-lb)
(2) Wiper blade ASSY (5) CapT1: 7.0 (0.71, 5.2)
(3) Wiper arm (6) Wiper motor ASSYT2: 8.0 (0.82, 5.9)