2009 Peugeot 207 Dag Owner's Manual

!
i
60
Interior mirror
Adjustable mirror providing a central
rearward view.
Adjustment

 Adjust the mirror so that the glass is di-
rected correctly in the "day" position.
As a safety precaution, the mirrors
must be adjusted to reduce the
"blind spot". Automatic day/night model
System which automatically and pro-
gressively changes between the day
and night uses.
In order to prevent dazzle, the interior
mirror glass darkens automatically in
relation to the intensity of the light from
the rear.
It lightens when the light (light beam of
following vehicles, sun...) decreases, so
guaranteeing optimum visibility.
Manual model
The mirror is fi tted with a night-time anti-
dazzle device.
Day/night position

 Pull the lever to change to the "night"
anti-dazzle position.

 Push the lever to change to the normal
"day" position. In order to guarantee optimum visi-
bility during your manoeuvres, the
mirror lightens automatically when
reverse gear is engaged.

!
i
61
STEERING WHEEL ADJUSTMENT
The height and reach of the steering
wheel can be adjusted to adapt the driv-
ing position to the size of the driver.
Adjustment
 When stationary,stationarystationary pull the control to unlock the steering wheel.
 Adjust the height and depth.
 Push the control to lock the steering wheel.
SUN VISOR
Component which protects against sunlight
from the front or the side, also equipped
with an illuminated courtesy mirror.

 With the ignition on, raise the con-
cealing fl ap; the mirror is lit automa-
tically.
This sun visor is also equipped with a
ticket holder.
TOLL CARD/CAR PARK TICKET
WINDOWS
Facility for affi xing toll cards and/or car
park tickets.
These windows are located on each
side of the base of the interior mirror.
They are two non-refl ective areas of the
athermic windscreen.

!
!
62
To avoid any risk of jamming of the
pedals:
- only use mats which are suited to the fi xings already present in
the vehicle; it is imperative that
these are used.
MAT
Removable component which protects the carpet against exterior dirt.
Refitting
To refi t the mat on the driver's side:

 position the mat correctly,

 refi t the fi xings by pressing,


check that the mat is secured correctly. Fitting
When fi tting the mat for the fi rst time, use only the fi xings provided in the wallet attached.
Removal
To remove the mat on the driver's side:

 move the seat as far back as possible,

 unclip the fi xings,
 remove the fi xings, then the mat.
USB PLUG - READER
This connection box, consisting of a
JACK socket and a USB port, is located
on the centre console.
It permits the connection of portable
equipment, such as a digital audio play-
er of the iPod ®
or USB stick type.
It reads the audio fi le formats (mp3,
ogg, wma, wav...) which are transmitted
to your audio equipment and played via
the vehicle's speakers.
You can manage these fi les using the
steering wheel controls or the audio
equipment control panel and display
them on the multifunction screen.
When it is in use, the portable equip-
ment charges automatically.
For further details concerning the
use of this equipment, refer to the
PC Sound part of the "Audio and
Telematics" section.

63
INTERIOR LAYOUT

1. Glove box with light
(see details on following page)

2. Storage compartment with
non-slip mat

3. Card holder

4. Door tray

5. Storage compartment with
non-slip mat

6. USB socket
(see details on previous page)

7. 12 V accessories socket
(see details on following page)

8. Storage compartments

9. Can holder

64
Glove box with light *
This has an upper open storage com-
partment, a recess and locations for
storing a bottle of water, the vehicle's
handbook, ...
Its lid has locations for storing a pen,
a pair of spectacles, tokens, cards, a
can, ...

 To open the glove box, raise the
handle.
It is lit when the lid is opened.
It houses the front passenger air bag
disarming switch A .
 To connect a 12 V accessory (max
power: 120 Watts), lift the cover and
connect a suitable adaptor.
12 V accessories socket
If the vehicle is fi tted with automatic
air conditioning, it provides access to
the ventilation nozzle B , which can be
opened or closed, distributing the same
conditioned air as the vents in the pas-
senger compartment.
* According to version.

65
BOOT LAYOUT
(SALOON)

1. Rear shelf
(see details on following page)

2. Hooks
(see details on following page)

i
66
Hooks
Rear shelf (Saloon)
To remove the shelf:

 unhook the two cords,

 raise the shelf slightly, then remove it. The hooks permit the securing of shop-
ping bags.
When changing a wheel
The hooks permit easy access to
the spare wheel by retaining the
boot carpet by means of its cord.
You have two storage options:
either upright behind the front seats,
- or upright behind the rear seats.

67
BOOT LAYOUT (SW)

1. Load space cover
(see details on following page)

2. 12 V accessories socket
(see details on following page)

3. Hooks
(see details on previous page)

4. Retaining straps

5. Stowing rings

6. High load retaining net
(see details on following page)

7. Storage box

8. Storage net

9. Storage box
(refer to the section "Practical information - § Changing a wheel")