!
32
  Options  
 Once the "Options" menu has been se- 
lected,  you  can  start  diagnostics  of  the 
status of the equipment (active, not ac-
tive, faulty).    Languages  
 Once  the  "Languages"  menu  has  been  
selected, you can change the language 
used  by  the  display  (Français,  Italiano, 
Nederlands,  Portugues,  Portugues-
Brasil, Deutsch, English, Espanol).  
  Display settings  
 Once  the  "Display  settings"  menu  has  
been  selected,  you  can  gain  access  to 
the following settings:  
   -   year, 
  -   month, 
  -   day, 
  -   hour, 
  -   minutes, 
  -   12 or 24 hour mode. 
  
     Wait  for  approximately  ten  sec-
onds  without  any  action  to  allow  the  
changed data to be recorded or press 
the   "ESC"   button to cancel.   
 The  display  then  returns  to  the  normal 
display.  
   O n c e    t h e    " V e h i c l e    c o n fi   g u r a t i o n "    m e n u   
has  been  selected,  you  can  activate  or 
deactivate the following equipment:  
   -   wiper linked with reverse gear (refer  to the "Visibility" section), 
  -   directional  headlamps  (refer  to  the  "Visibility" section), 
  -   "follow-me-home"  lighting  (refer  to  the "Visibility" section).   
 For safety reasons, it is imperative  
 t h a t    c o n fi   g u r a t i o n    o f    t h e    m u l t i f u n c -
tion  displays  by  the  driver  takes 
place when stationary.   
  Units  
 Once  the  "Units"  menu  has  been  se- 
lected, you can change the units of the 
following parameters:  
   -   temperature (°C or °F), 
  -   fuel  consumption  (l/100km,  mpg  or 
km/l).  
     V e h i c l e   c o n fi   g u r a t i o n  
   
     Once  you  have  selected  a  setting, 
press the   "OK"  button to change its 
value.