2008 MITSUBISHI SHOGUN display

Instruments and controls
3-57
3
2. Press the “SET” function button. The display will flash
twice and the barometer indication will return to the fac- tory setting.
NOTE●
Although the barometer value is changed to the factory setting, a barometer unit you have selected is unchanged.
●
You can return to the previous display by pressing the “BACK” function button.
3. After setting the barometer default, press the “INFO” but-
ton to return to the information display.
Care of the monitor
E00519700012
If the monitor becomes covered in fingerprints or otherwise dirty, clean it with a soft and dry cloth.NOTE●
Don’t use a wet cloth or abrasive cleaner as this may cause damage.
BK-BK2008E1ENUK.en-uk-Section6.fm Page
57 Wednesday, January 9, 2008 4:32 PM

Starting and driving
4-87
4
NOTE●
It is possible to set the display language of the screen to English, Spanish, French,
German, Italia
n, Swedish,
Dutch, Danish or Portuguese. For details, please refer to the separated owner’s manualfor “Mitsubishi Multi Communication System (MMCS)”.
●
When the vehicle is tilting b
ecause of the number of peo-
ple in the vehicle, the weight and positioning of luggage,and/or the condition of the road surface, the lines in the view from the rear-view camera may not be accurately positioned relative to the actual road.
●
The lines in the view from the rear-view camera are based on a level, flat road surface. Do not use them as a guide for distances to solid objects.
●
Because the rear-view camera has a special lens, the lines on the ground between parking spaces may not look paral- lel on the screen.
●
In the following situations, the screen indication may be difficult to see. There is no abnormality. • Low light (nighttime)• When the light of the sun or the light from a vehicle’s headlamps shines directly into the lens → When an extremely bright spot is shown on the screen, colour smearing* (a
characteristic of CCD cam-
eras) can occur.
●
Colour smearing: When an
extremely bright spot (for
example, sunlight that has
reflected off the bumper) is
shown on the screen, it appear
s to leave a vertical trail.
●
If the camera is hot and is th
en cooled by rain or a car
wash, the lens can mist up. This phenomenon does not indicate a malfunction.
A: Rear extremity of the rear bumper B: Spare wheel garnishC: Approx. 20 cm D: Approx. 50 cm E: Approx. 1 mF: Line (red) G: Line (green)
CAUTION
!●
The rear-view camera has a special lens that can make objects shown on the screen appear to be closer or further away th
an they actually are.
●
The line (red) shows the point approximately 50 cm behind the rear extremity of the rear bumper. Be careful because the spare wheel garnish over- hangs for approximately 30 cm behind the rearextremity of the rear bumper.
BK-BK2008E1ENUK.en-uk-Section7.fm Page
87 Wednesday, January 9, 2008 4:36 PM

5-4 For pleasant driving
5
Front automatic air conditioning
E00702400165
The front air conditioning can only be used while the engine is running.Control panel
E00702500632
1- Temperature control dial 2- Demister switch 3- MODE switch 4- OFF switch5- Blower speed selection dial 6- AUTO switch 7- Rear window demister switch
→ p. 3-77
8- Air selection switch 9- Rear blower switch*
→ p. 5-16
10- Air condition switch11- Temperature display
12- Mode selection display 13- Rear blower operation display 14- Front blower speed display
BK-BK2008E1ENUK.en-uk-Section8.fm Page 4 Wednesday, January 9, 2008 4:41 PM

For pleasant driving
5-5
5
NOTE●
There is an interior air temper
ature sensor (A) in the illus-
trated position. Never place anything on top of
the sensor, since doing so
will prevent it from functioning properly.
Blower speed selection dial
E00702800198
Select the blower speed by turn
ing the blower speed selection
dial clockwise or anticlockwise. The blower speed will gradu- ally increase as the dial is turned to the right.The selected blower speed will
be shown by the front blower
speed display (A).1- Increase 2- Decrease
BK-BK2008E1ENUK.en-uk-Section8.fm Page 5 Wednesday, January 9, 2008 4:41 PM

For pleasant driving
5-9
5
OFF switch
E00702700012
Push the switch to turn off the air conditioning system.
MODE switch
E00703300015
Each time the MODE switch is
pressed, the mode changes to
the next one in the following sequence: “ ”
→ “”
→ “”
→ “”
→ “ ”. The selected mode is shown by the mode
selection display (A). (Refer to “Changing the front mode selection” on page 5-10.)
BK-BK2008E1ENUK.en-uk-Section8.fm Page 9 Wednesday, January 9, 2008 4:41 PM

5-10 For pleasant driving
5
Demister switch
E00703900037
When this switch is pressed, the mode changes to the “ ” mode. The indication lamp (A) will come on. The selected mode is shown by the mode selection display (B). (Refer to “Changing the front mode selection” on page 5-10.)NOTE●
When the demister switch is
pressed, the air conditioning
system automatically operates
and outside air (as opposed
to recirculated air) is selected. (Refer to “Demisting of the windscreen and door win-dows” on page 5-14.)
Changing the front mode selection
E00727100017
To change the position and amount of air flowing from the ven-tilators, push the MODE switch or demister switch. (Refer to “MODE switch” on page 5-9 and “Demister switch” on page 5-10.)These symbols are used in the next several illustrations to dem- onstrate the quantity of air coming from the ventilators.
: Small amount of air from the ventilators: Medium amount of air from the ventilators : Large amount of air from the ventilators
Face positionAir flows only to the upper part of the passenger compartment.
BK-BK2008E1ENUK.en-uk-Section8.fm Page
10 Wednesday, January 9, 2008 4:41 PM

5-16 For pleasant driving
5
Rear fan switch for the front seat
E00705000016
When the rear blower switch is
pressed, the rear blower starts
operating, the rear blower op
eration display (A) shows “REAR
ON”. When the rear blower swit
ch is pressed again, the rear
blower goes off.NOTE●
Check whether or not the rear
blower is operating by look-
ing at the operation display (A). The operation displayshows when the rear
blower is operating.
Main switch for the rear seat
E00704900018
Push the switch, and the rear bl
ower will operat
e, turning the
operation indication lamp (A) on. Push the switch again, and the rear blower will stop.NOTE●
Either the front rear switch
or the rear main switch can be
used to switch the power of
the rear blower ON and OFF.
BK-BK2008E1ENUK.en-uk-Section8.fm Page
16 Wednesday, January 9, 2008 4:41 PM

5-20 For pleasant driving
5
LW/MW/FM electronic tuning radio with
CD player
*
E00708500432
The audio system can be used when
the ignition switch is in the
“ON” or “ACC” position.NOTE●
To listen to the audio system while the engine is stopped, turn the ignition key to the “ACC” position.
●
If a cellular phone is used insi
de the vehicle, it may create
noise from the audio equipment. This does not mean thatanything is wrong with your audio equipment. In such a case, use the cellular phone at
a place as far as possible
from the audio equipment.
●
If foreign objects or water ge
t into the audio equipment, or
if smoke or a strange odour comes from it, immediately turn off the audio system. We recommend you to have itchecked. Never try to repair it by yourself. Avoid continu- ous usage without inspection by a qualified person.
Volume and tone control panel
E00708600114
1- PWR (On-Off) button 2- VOL (Volume control) button 3- Memory select buttons4- MENU button 5- Sound adjust button 6- Display
BK-BK2008E1ENUK.en-uk-Section8.fm Page
20 Wednesday, January 9, 2008 4:41 PM