Page 164 of 538
3-40 Instruments and controls
3
Setting the compass The compass is usually calibrated automatically when the vehi- cle is moving. At times when complete calibration is not possi- ble, no compass indications are given. Manually set thecompass using the following procedure.NOTE●
If your vehicle has a sunr
oof, keep the sunroof closed
when calibrating the compass.
Having the sunroof open
when calibrating the compa
ss could render the compass
unable to correctly show directions.
With a settings display showing, press the “ADJ” button and select “COMPASS CALIBRATION”. 1. Press the function button for “SELECT”.
BK-BK2008E1ENUK.en-uk-Section6.fm Page
40 Wednesday, January 9, 2008 4:32 PM
Page 166 of 538
3-42 Instruments and controls
3
4. The compass setting will finish automatically and the
words “COMPASS CALIBRATION COMPLETE” will appear on the screen.
NOTE●
If your vehicle has a sunroof, do not open the sunroof when checking the indicated
direction after completing
the turn. Opening the sunroof
could cause the azimuth bar
shown on the centr
e information display to freeze because
of electromagnetic interference.
Be sure to check the indi-
cated direction with the sunroof
closed. If the azimuth bar
freezes, perform the compass cal
ibration procedure again.
Changing the calendar setting
E00519500010
The date and the calendar indication patterns can be changed. Date setting 1. Press the “ADJ” button to select the calendar setting dis-
play.
BK-BK2008E1ENUK.en-uk-Section6.fm Page
42 Wednesday, January 9, 2008 4:32 PM
Page 167 of 538
Instruments and controls
3-43
3
2. Press the “
←” or “
→” function button to select “CALEN-
DAR ADJUST”. Then press the “SELECT” function but- ton.
3. Use the function buttons to set the calendar." →"- Select “YEAR”, “MONTH”, “DAY” you wish to
change.“YEAR”, “MONTH”, and “DAY” are changed over byturns every time you lightly press the “
→” function but-
ton.
“+”- Change “YEAR”, “MONTH”, “DAY” you have
selected.The indication is changed to your desired date everytime you lightly press the “+” function button.If you continue pressing the button for about 2 secondsor more, the indication is forwarded.
“SET”- Determine the date.
Press the “SET” function button. Then the displayflashes twice and the setting is changed.
BK-BK2008E1ENUK.en-uk-Section6.fm Page
43 Wednesday, January 9, 2008 4:32 PM
Page 168 of 538
3-44 Instruments and controls
3
NOTE●
The year changes in the
following sequence: 2006
→
2007
→ ... 2099
→ 2006.
●
You can return to the previous display by pressing the “BACK” function button.
4. After setting the date, press the “INFO” button to return to
the information display.
Changing the calendar pattern 1. Press the “ADJ” button to select the calendar setting dis-
play. Press the “
←” or “
→” function button to select
“CALENDAR PATTERN SELE
CT”. Then press the
“SELECT” function button.
BK-BK2008E1ENUK.en-uk-Section6.fm Page
44 Wednesday, January 9, 2008 4:32 PM
Page 169 of 538
Instruments and controls
3-45
3
2. Press function button “
←” or “
→” to select your desired
indication pattern.
3. Press the function button “SET”. The display will flash
twice, and the indication pattern will be updated.
NOTE●
You can return to the previous display by pressing the “BACK” function button.
Type 1 Type 2 Type 3
BK-BK2008E1ENUK.en-uk-Section6.fm Page
45 Wednesday, January 9, 2008 4:32 PM
Page 170 of 538
3-46 Instruments and controls
3
4. After setting the calendar pattern, press the “INFO” but-
ton to return to the information display.
User customization
E00519600079
You can set the indication of unit, language, and the time nota- tion. In addition, you can return these settings to the factory defaultsettings. Selecting the item to set 1. Press the “ADJ” button to se
lect the user customization
display.
BK-BK2008E1ENUK.en-uk-Section6.fm Page
46 Wednesday, January 9, 2008 4:32 PM
Page 171 of 538
Instruments and controls
3-47
3
2. Press the function button “
←” or “
→ ” to select the item
you wish to set. · “UNIT”: Changing the unit · “LANGUAGE”: Changing the language· “12h
↔
24h”: Changing the time format
· “DEFAULT”: Resetting to factory settings Push the function button “SELECT”. The setting displayfor your selected item will appear.
Changing display units It is possible to change the display units for the fuel consump- tion, driving range, average speed
, outside temperature, eleva-
tion, and atmospheric pressure as shown below.FUEL ECONOMY
km/L
→ L/100km
→ mpg
(UK GALLON)
→ mpg (US GALLON)
RANGE km
→ miles
SPEED km/h
→ mph
OUTSIDE TEMPERATURE
°C
→ °F
ELEVATION m
→ ft
atmospheric pressure
hPa
→ mb
→ kPa
→ inHg
BK-BK2008E1ENUK.en-uk-Section6.fm Page
47 Wednesday, January 9, 2008 4:32 PM
Page 172 of 538
3-48 Instruments and controls
3
• Changing the display unit for fuel consumption 1. Press the “
←” or “
→ ” function button to select “FUEL
ECONOMY”. Then press the
“SELECT” function button.
2. Press the “
←” or “
→ ” function button to select “km/L”.
Then press the “SET” function button. The display will flash twice, and the display unit will be updated to the selected one.
NOTE●
You can return to the previous display by pressing the “BACK” function button.
BK-BK2008E1ENUK.en-uk-Section6.fm Page
48 Wednesday, January 9, 2008 4:32 PM