4-66 Starting and driving
4
Driving hints
E00618100036
When extricating the vehicle
from mud, sand or fresh snow
with the transfer shift lever in the “2H”, “4H”, or “4HLc” posi- tion, you may find that operation of the ASTC prevents the engine speed from increasing in
response to depression of the
accelerator pedal. If this happens
and the vehicle remains stuck
as a result, place the transfer sh
ift lever in the “4LLc” position
or turn the active stability cont
rol switch OFF. The vehicle will
then be easier to extricate. (Bra
ke control of the active traction
control function is still working to prevent wheel spins when ASC OFF switch “OFF” or
“4LLc” position selected.)
NOTE●
If the vehicle speed increases
to about 120 km/h (75 mph)
with the active stability cont
rol function deactivated, the
active stability control function automatically starts oper-ating. To subsequently stop the active stability control function, stop the vehicle
and press the ASC OFF switch
again.
Active stability control function
E00613900097
The active stability control function is designed to help main-tain the vehicle’s control in slippery conditions, or during rapid steering maneuvers. It works by controlling the engine output and brake on each wheel.NOTE●
The active stability control function does not operate when the transfer shift lever is in the “4LLc” position. When the active stability control function is operatingwith the transfer shift lever
in the “2H”, “4H” or “4HLc”
position, moving the shift lever to the “4LLc” position makes the active stability cont
rol function d
eactivate auto-
matically.
●
On vehicles with rear differ
ential lock, th
e active stability
control function does not operate when the rear differen-tial lock is activated.
BK-BK2008E1ENUK.en-uk-Section7.fm Page
66 Wednesday, January 9, 2008 4:36 PM
