4-86 Starting and driving
4
How to use the rear-view cameraWhen you place the shift lever
in the “R” (Reverse) position
(on vehicles with M/T) or selector lever in the “R”(REVERSE) position (on vehicles with A/T) with the ignition switch in the “ON” position, th
e view behind the vehicle will
automatically appear on the sc
reen of the Mitsubishi Multi
Communication System (MMCS). When you move the shift lever or selector lever to any other position, the screen will return to its original indication.NOTE●
The buzzer that sounds while th
e vehicle is reversing indi-
cates that the selector lever is in the “R” (REVERSE) position. It does not warn of an obstacle behind the vehi-cle (on vehicles with A/T).
●
If you press any of the buttons on the MMCS control panel while the screen is showing the view from the rear-view camera, the screen indi
cation will change to the one
for that button.
Example of rear-view ca
mera screen indication
The lines (F and G) in the view from the rear-view camera have the meanings shown below. Please use them as guides. ●
Red: The point approximately 50 cm behind the vehicle
●
Green: The point approximatel
y 20 cm beyond the width
of the vehicle on either side
BK-BK2008E1ENUK.en-uk-Section7.fm Page
86 Wednesday, January 9, 2008 4:36 PM
Specifications
9-5
9
Item
3-door models
5-door models
1
Front track 1,560 mm 1,570 mm
2
Overall width
Without side protector moulding 1,845 mm —With side protector moulding 1,875 mm
3
Front overhang 765 mm
4
Wheel base 2,545 mm 2,780 mm
5
Rear overhang 1,075 mm 1,355 mm
6
Overall length 4,385 mm 4,900 mm
7
Ground clearance (unladen) 225 mm
8
Overall height
Without roof rails 1,850 mm 1,870 mm
9
With roof rails 1,880 mm 1,900 mm
10
Rear track 1,560 mm 1,570 mm
Minimum turning radius
Body 5.7 m 6.1 mWheel 5.3 m 5.7 m
BK-BK2008E1ENUK.en-uk-Section12.fm Page
5 Thursday, January 10, 2008 7:49 AM
