2008 MITSUBISHI SHOGUN alarm

Instruments and controls
3-27
3
Resetting the outside temperature Press the “RESET” function button to reset the graph of the outside temperature.NOTE●
Depending on factors such as the driving conditions, the displayed temperature may vary from the actual outside temperature.
●
It is possible to set the display unit to °C or °F. Refer to “User customization” on page 3-46.
Frozen road warning This shows the temperat
ure outside the vehicle.
When the outside air temperature drops below about 3 °C (37 °F), the alarm sounds and th
e outside air temperature warn-
ing symbol (A) flashes for about 10 seconds.
CAUTION
!●
There is a danger the road might be icy, even when this symbol is not flashing
, so please take care when
driving.
BK-BK2008E1ENUK.en-uk-Section6.fm Page
27 Wednesday, January 9, 2008 4:32 PM

5-32 For pleasant driving
5
TP (Traffic information Program) search function
E00721800100
The traffic information program
search function is turned on
(with the TP indicator (14) shown on the display), if: ●
The RDS is off for 45 seconds due to a weak signal.
●
The station is changed to another station without a TP sig- nal and then 45 seconds elapse.
When turning on, 5 beeps will
be heard and a new TP station
will be searched for.
Emergency broadcasts
E00721700138
If an emergency broadcast is caught while receiving a FMbroadcast or playing back a
compact disc, the display will
show “ALARM” and the emergency broadcast will interrupt the current program. The volume level is set separately for lis- tening to normal audio programs and for listening to emer-gency broadcasts. The volume
level will therefore change
automatically to that set when
an emergency broadcast or traf-
fic information broadcast was la
st received. When the emer-
gency broadcast is over, the radio will return to the previously received program and to the corresponding volume level.
BK-BK2008E1ENUK.en-uk-Section8.fm Page
32 Wednesday, January 9, 2008 4:41 PM

For pleasant driving
5-57
5
Emergency broadcasts
E00721700141
If an emergency broadcast is caught while receiving a FM broadcast or playing back a
compact disc, the display will
show “ALARM” and the emergenc
y broadcast will interrupt
the current program. The volume level is set separately for lis- tening to normal audio programs and for listening to emer-gency broadcasts. The volume level will therefore change automatically to that set when
an emergency broadcast or traf-
fic information broadcast was la
st received. When the emer-
gency broadcast is over, the radi
o will return to the previously
received program and to the
corresponding volume level.
Function setup mode
E00722500218
It is possible to change the following functions: ●
AF
●
CT
●
REG
●
TP-S
●
PI-S*
●
SCV (Refer to “Speed Comp
ensated Volume function” on
page 5-48).
●
PHONE
1. Press the “MENU” button (4) for 2 seconds or longer to
select the function setup mode.
BK-BK2008E1ENUK.en-uk-Section8.fm Page
57 Wednesday, January 9, 2008 4:41 PM