2008 MITSUBISHI GRANDIS wheel

Starting and driving
4-7
4
When parking on a hill, apply the parking brake and turn the
front wheels towards the kerb on a downhill grade, away from
the kerb on an uphill grade.
Parking
E00600600830
Parking on a hillTo prevent the vehicle from rolling into the street, follow these
procedures:Parking on a downhill slopeTurn the front wheels towards the kerb and move the vehicle
forward until the kerb side wheel gently touches the kerb.
Set the parking brake and place the gearshift lever into the
“R” (Reverse) position (with M/T) or the selector lever into the
“P” (PARK) position (with A/T).
If necessary, apply chocks to wheels.Parking on an uphill slopeTurn the front wheels away from the kerb and move the vehicle
back until the kerb side wheel gently touches the kerb.
Set the parking brake and place the gearshift lever into the
1st position (with M/T) or the selector lever into the
“P” (PARK) position (with A/T).
If necessary, apply chocks to wheels.NOTE●If your vehicle is equipped with A/T, be sure to apply the
parking brake before moving the selector lever to the
“P” (PARK) position. If you move the selector lever to the
“P” (PARK) position before applying the parking brake, it
may be difficult to disengage the selector lever from the
“P” (PARK) position when next you drive the vehicle,
requiring application of a strong force to the selector lever
to move from the “P” (PARK) position.
CAUTION
!●Before driving, be sure that the parking brake is
fully released and brake warning lamp is off.
If a vehicle is driven without releasing the parking
brake, the brake will be overheated, resulting in
ineffective braking and possible brake failure.●When you intend to apply the parking brake, firmly
press the brake pedal to bring the vehicle to a com-
plete stop before pulling the parking brake lever.
Pulling the parking brake lever with the vehicle
moving could make the rear wheels lock up, thereby
making the vehicle unstable.●If the brake warning lamp does not extinguish when
the parking brake is fully released, the brake system
may be abnormal. For details, refer to “Brake
warning lamp” on page 3-10.
BK-XP08E1ENUK.en-uk.book Page 7 Monday, August 13, 2007 2:20 PM

4-8 Starting and driving
4
Parking with the engine runningNever leave the engine running while you take a short
sleep/rest. Also, never leave the engine running in a closed or
poorly ventilated place. Leaving the engine running risks
injury or death from accidentally moving the gearshift lever
(M/T) or selector lever (A/T) or the accumulation of toxic
exhaust fumes on the passenger compartment.Where you parkYour front bumper can be damaged if you scrape it over kerbs
or parking stop blocks. Be careful when travelling up or down
steep slopes where your bumper can scrape the road.When leaving the vehicleAlways remove the key from the ignition switch and lock all
doors and the tailgate when leaving the vehicle unattended.
Always try to park your vehicle in a well lit area.
Steering wheel height adjustment
E00600700121
To adjust the steering wheel height, release the tilt lock lever
while holding the steering wheel by hand, and raise or lower
the steering wheel to the desired height.
After adjustment, securely lock the lever by pulling it upward.
WARNING
!●Do not park your vehicle in areas where combustible
materials such as dry grass or leaves can come in
contact with the hot exhaust, since fire could occur.
1- Locked
2- Release
WARNING
!●After adjusting to the desired height, check to be
sure that the lever is locked.●Do not attempt to adjust the steering wheel while
you are driving the vehicle.
BK-XP08E1ENUK.en-uk.book Page 8 Monday, August 13, 2007 2:20 PM

Starting and driving
4-9
4 Inside rear-view mirror
E00600800425
Adjust the rear-view mirror only after making any seat adjust-
ments so you have a clear view to the rear of the vehicle.
Adjust the rear-view mirror to maximize the view through the
rear window.To adjust the vertical mirror positionIt is possible to move the mirror up and down to adjust its posi-
tion.
●When releasing the tilt lock lever, move it to the
release position (2) and hold the steering wheel by
hand to prevent it falling to the lowest position.
WARNING
!
WARNING
!●Do not attempt to adjust the rear-view mirror while
driving. This can be dangerous.
Always adjust the mirror before driving.
BK-XP08E1ENUK.en-uk.book Page 9 Monday, August 13, 2007 2:20 PM

4-14 Starting and driving
4
Heated mirrors
E00601200077
When the rear window demister switch is pressed, the outside
rear-view mirrors are demisted or defrosted. Current will flow
through the heater element inside the mirrors, thus clearing
away frost or condensation.
The indicator lamp (C) will illuminate while the demister is on.
The heater will be turned off automatically in about 20 min-
utes.
Ignition switch
E00601401076
LOCKThe engine is stopped and the steering wheel locked. The key
can be inserted and removed only when the switch is in this
position.ACCThe engine is stopped, but the electrical devices such as the
radio and cigarette lighter can be operated.ONThe engine is running, and all the vehicle’s electrical devices
can be operated.STARTThe starter motor operates. After the engine has started, release
the key and it will automatically return to the “ON” position.M/T A/T
BK-XP08E1ENUK.en-uk.book Page 14 Monday, August 13, 2007 2:20 PM

4-16 Starting and driving
4
For vehicles with A/T, when removing the key, first set the
selector lever to the “P” (PARK) position, and then turn the key
to the “LOCK” position, then remove the key.A/T
CAUTION
!●Do not remove the ignition key from the ignition
switch while driving. The steering wheel will locked,
causing loss of control.●If the engine is stopped while driving, the brake ser-
vomechanism will cease to function and braking
efficiency will deteriorate. Also, the power steering
system will not function and it will require greater
manual effort to operate the steering.●Do not leave the key in the “ON” position for a long
time when the engine is not running, doing so will
cause the battery to be discharged.●Do not turn the key to the “START” position when
the engine is running, doing so could damage the
starter motor.
BK-XP08E1ENUK.en-uk.book Page 16 Monday, August 13, 2007 2:20 PM

Starting and driving
4-17
4 Steering wheel lock
E00601500083
To l o c kRemove the key at the “LOCK” position.
Turn the steering wheel until it is locked.To u n l o c kTurn the key to the “ACC” position while moving the steering
wheel slightly.
NOTE●If the front wheels are turned, the anti-theft lock may
sometimes make it difficult to turn the key from “LOCK”
to “ACC”. Firmly turn the steering wheel to the left or to
the right as you turn the key.
CAUTION
!●Remove the key when leaving the vehicle.
BK-XP08E1ENUK.en-uk.book Page 17 Monday, August 13, 2007 2:20 PM

4-36 Starting and driving
4
When driving downhillIt is important to take advantage of the engine braking by shift-
ing to a lower shift position while driving on steep downhill
roads in order to prevent the brakes from overheating.Brake pads●With new brake pads, avoid where possible sudden full
application of the brakes for the first 200 km (124 miles)
of driving.
●The disc brakes are provided with a warning device which
emits a shrieking metallic sound while braking if the
brake pads have reached their limit.
If you hear this sound, have the brake pads replaced.
Anti-lock brake system (ABS)
E00607100560
Environmental conditions can have an effect on braking. Dur-
ing sudden braking when there is snow, ice, oil, water etc. on
the road surface, a skid may occur. In this situation, steering
control and braking effectiveness is reduced and the stopping
distance is increased. The vehicle may also go into an uncon-
trolled spin.
The ABS helps prevent the wheels from locking during brak-
ing, thus maintaining directional stability, ensuring controlla-
bility and providing optimum braking force.Driving hints●With ABS fitted, steering during sudden braking (when
the ABS functions) differs slightly from when the brakes
are not being applied.
Steer the vehicle carefully in these conditions.
●Always maintain the same distance from the vehicle in
front of you as you would for a vehicle not equipped with
ABS.
Compared with vehicles not fitted with ABS, your vehicle
may require a longer stopping distance in the following
cases:
• Driving on gravel or snow-covered roads.
• Driving with tyre chains installed.
• Driving on roads where the road surface is pitted or has
other differences in surface height.
• Driving on bumpy roads or other poor driving surfaces.
WARNING
!●Do not leave any objects near the brake pedal or let
a floor mat slide under it; doing so could prevent the
full pedal stroke that would be necessary in an emer-
gency. Make sure that the pedal can be operated
freely at all times. Make sure the floor mat is
securely held in place.
WARNING
!●Driving with worn brake pads will make it harder to
stop, and can cause an accident.
BK-XP08E1ENUK.en-uk.book Page 36 Monday, August 13, 2007 2:20 PM

Starting and driving
4-37
4
●Operation of ABS is not restricted to situations where
brakes are applied suddenly. This system may also operate
to prevent wheel lock when you are driving over man-
holes, steel road-work plates, or the vehicle is driven over
steps or level differences in the road, road markings, or
other surfaces which are difficult for the wheels to grip.
●When the ABS is activated, you may feel the brake pedal
pulsating and hear a characteristic noise. Also at this time,
it may feel as if the pedal attempts to resist being
depressed.
In this situation, to let the ABS work for you, just hold
the brake pedal down more firmly. Do not pump the
brake. This will result in reduced braking perform-
ance.
CAUTION
!●Even the ABS cannot prevent the natural laws of
physics from acting on the vehicle. It cannot for
instance avoid accidents that may result from exces-
sive speed on bends or following another vehicle too
closely or aquaplaning. It should remain the driver’s
task to observe safety precautions to judge speeds
and brake applications correctly in such conditions.●Be sure to use tyres of the same type and size on
4 wheels.
If tyre types or sizes are mixed, ABS may not func-
tion normally.●Never install a limited slip differential, which is not
a MITSUBISHI MOTORS genuine part, as the ABS
may not function normally.
We recommend to consult a MITSUBISHI
MOTORS Authorized Service Point.
BK-XP08E1ENUK.en-uk.book Page 37 Monday, August 13, 2007 2:20 PM