2008 GREAT WALL FLORID maintenance

Downloaded from www.Manualslib.com manuals search engine GWFLORID Maintenance Manual50
Transmission Case
Components
Clip
Shift lever assembly
Pressure torsion spring
Reverse gear switch subassembly
Washer
Bush
Oil drain slot
Tapered roller bearings
Adjusting shim
Transmission case
Clip
Clip
Adjusting shim
×8
WasherWasher
Hexagon head plug
39.2
Bolt for flange face12.0
: Specified torqueN·m
Hexagon head plug
39.2
Bolt for flange face
29.4
Position mechanism assembly
36.8

Downloaded from www.Manualslib.com manuals search engine GWFLORID Maintenance Manual52
5. Remove the reverse gear arm bracket assembly.
6. Remove the No. 1 gear shift fork shaft and the set
bolts.
7. Remove the elastic cylindrical pin from the No. 1 guide
block.
8. Remove the No. 1 gear shift fork, No. 1 gear shift fork
shaft, and No. 1 guide block.

Downloaded from www.Manualslib.com manuals search engine GWFLORID Maintenance Manual54
13. Remove the No. 2 gear shift fork shaft, No. 2 gear shift
fork, and No. 2 guide block.
14. Remove the input and output shaft subassembly.
15. Remove the differential subassembly.
16. Remove the magnetic body from the inside of the
clutch housing.

Downloaded from www.Manualslib.com manuals search engine GWFLORID Maintenance Manual56
Disassembling the Input Shaft Subassembly
Components
Input shaft
Rear ball bearing
No. 3 gear sleeve/
No. 3 gear hub
No. 3 Slider
Spring expansion ring
5th gear synchronizer ring
5th gear gear subassemblyNeedle bearing
Retaining ring
Shaft retainer
Steel ball
5th gear thrust washer
Needle bearing4th gear subassembly
4th gear synchronizer ring
Retaining ring
Shaft retainer
No. 2 gear sleeve/No. 2 gear hub
No. 2 Slider
Spring expansion ring
3rd gear synchronizer ring
Needle bearing
Front ball bearing
3rd gear gear subassembly
Spring expansion ring
Spring expansion ring
1. Remove the input shaft's ball bearing.

Downloaded from www.Manualslib.com manuals search engine GWFLORID Maintenance Manual58
6. Remove the input shaft's 5th gear thrust washer.
7. Remove the steel balls from the 5th gear thrust washer
of the input shaft.
8. Remove the 4th gear subassembly, 4th gear needle
bearing, 4th gear synchronizer ring, and the 4th gear
bearing washer (4 types of part).
9. Remove the shaft retainer from the input shaft's No. 2
synchronizer gear hub.

Downloaded from www.Manualslib.com manuals search engine GWFLORID Maintenance Manual60
Disassembling the Output Shaft Subassembly
Components
Front tapered roller bearing
Output shaft
Needle bearing
1st gear gear subassembly
1st gear synchronizer ring
No. 1 gear sleeve/No. 1 gear hub
No. 1 Slider
Spring expansion ring
Shaft retainer
Retaining ring
Needle bearing
2nd gear synchronizer ring
2nd gear gear subassembly
3rd driven gear
Spacer
4th driven gear
5th driven gear
Shaft retainer
Rear tapered roller bearing
1. Remove the output shaft's rear tapered roller bearing.

Downloaded from www.Manualslib.com manuals search engine GWFLORID Maintenance Manual62
6. Remove the output shaft's 2nd gear synchronizer ring,
2nd gear needle bearing, and the 2nd gear subassem-
bly retaining ring.
7. Remove the shaft retainer from the No. 1 synchronizer
gear hub of the output shaft.
8. Remove the output shaft's No. 1 synchronizer compo-
nents and the 1st driven gear.
9. Remove the needle bearing from the output shaft's 1st
driven gear subassembly.

Downloaded from www.Manualslib.com manuals search engine GWFLORID Maintenance Manual64
Disassembling the Shift Cover Subassembly
Components
Shift lever assembly
Dust cover
T oil seal
Gear shifting block
No. 2 spring seat
Pressure spring
Shaft retainer
Gasket
Lock plateShaft retainerElastic cylindrical pin
Shift guide block
Select lever subassembly
Manipulation lid
T oil seal
1. Remove the shift lever's elastic cylindrical pin.
Set bolt38.0
: Specified torqueN·m