Downloaded from www.Manualslib.com manuals search engine 271Vehicle Body
2. Adjust the rear part.
b = 0-1 mm, higher than the level position of the sunroof.
The arrow refers to the driving direction (facing forward).
3. Adjust the window panel weatherstrip.
Use a sheet of paper of 0.3 mm thickness to check whether
the prestress between the weatherstrip and vehicle body is
consistent.
(a) If the prestress is insufficient, use a plastic wedged
instrument to enlarge the weatherstrip's clearance.
(b) If the prestress is excessive, use a stick to compress the
weatherstrip's clearance.
Replace the weatherstrip
1. Remove the window panel weatherstrip.
2. Install the weatherstrip.
Start from the center of the rear part and install the new
weatherstrip onto the window panel from the top down.
Instructions: In order to install the weatherstrip more easily,
it is suggested to coat soap liquid around window panel first.
If the weatherstrip is installed incorrectly, it will cause the
upper part's surface be to wavy. The weatherstrip must be cut
short according to the window panel's perimeter.
WeatherstripWindow
WeatherstripWindow
