2007 YAMAHA YBR125 Owners Manual

DESCRIPTION
2-2
Right view11. Rear shock absorber (page 3-9)
12. Air filter (page 6-10)
13. Kick starter (page 3-7)14. Seat(page 3-8)
15. Engine oil filler cap (page 6-8)
16. Rear brake pedal (page 3-4,6-17)
STANDARD VEHICLE
15
11 12 13 14
16
Libero5TS8.pmd11/3/2006, 8:50 PM 5

17. Clutch Lever (page 3-3, 6-16)
18. Left Hand Switch (page 3-3)
19. Speedometer(page 3-2)
20. Main switch Cum Steering Lock (Page 3-1)
21. Fuel Gauge (page 3-2)22. Front Brake Lever (page 3-4, 6-16)
23. Throttle Grip(page6-12)
24. Fuel Tank Cap (page 3-5)
25. Turn Indicator Switch (page 3-2)Controls / InstrumentsDESCRIPTION
STANDARD VEHICLE
2-3
24 17181920
21
23
25
22
Libero5TS8.pmd11/3/2006, 8:50 PM 6

Main switch cum steering
lockThe main switch controls the ignition
and lighting systems. Its operation is
described below.
ON:
Electrical circuits are switched on.
The engine can be started. The key
cannot be removed in this position.
OFF:
Engine will be shut off. All electrical
circuits are switched off. The key can
be removed in this position.
1. Push
2. Release
3. TurnLOCK:
The steering is locked in this position
and all electrical circuits are switched
off.
The key can be removed in this
position.
To lock the steering, turn the handle-
bars all the way to the left or right. With
the key at "OFF", push it into the main
switch and release it, turn it counter-
clockwise to "LOCK" and remove it. To
release the lock, turn the key to
"OFF".
INSTRUMENT AND CONTROL FUNCTIONS
WARNING
Never turn the key to "LOCK" when
the Motorcycle is moving.
3-1

INSTRUMENT AND CONTROL FUNCTIONS
3-2
1. Turn indicator light “ ”
2. Neutral ”N”
3. High beam.Indicator light “ ” 1. Speedometer
2. Odometer1. Fuel gauge
1
1
2SpeedometerThe speedometer shows riding
speed.
This speedometer is equipped with
an odometer.
Fuel gaugeThe fuel gauge indicates the quantity
of the remaining petrol in the fuel tank.
The gauge needle moves from “F”
(Full) to"E”(Empty) as the fuel level
decreases.
When the needle comes below “E”
please refill the fuel tank at the
earliest.
Indicator lights1. Turn indicator light " "
2. Neutral indicator light "N"
3. High beam indicator light " "The indicator flashes when the
turn switch is moved to the left or
right. .
This indicator comes on when the
transmission is in neutral.
This indicator comes on when the
headlight high beam is used.
1
2
3

Turn signal switch
Horn switch " "
Lights switch To signal a right-hand turn, push the
switch to " ". To signal a left-
hand turn, push the switch to " ".
Once the switch is released it will
return to the center position. To
cancel the signal, push the switch in
after it has returned to the center
position.
Press the switch to sound the horn.
Turning the light switch to " ",
turns on the meter light and tail-light.
Turning the light switch to “ ",
turns the headlight on also.
1. Clutch leverClutch leverThe clutch lever is located on the left
handlebar. Pull the clutch lever to
the handlebar to disengage the
clutch, and release the lever to
engage the clutch. The lever should
be pulled rapidly and released slowly
for smooth clutch operation.
INSTRUMENT AND CONTROL FUNCTIONS
3-3
1. PassSwitch " "
2. Dimmer Switch
3. Light switch
4. Turn signal cum cancellation switch“ “
5. Horn switchHandlebar switchesDimmer switch
Turn the switch to" " for the high
beam and to " " for the low beam. Pass switch""
Press the switch to operate the
Passing Light.
1
1
2
3
4 5

1. Shift pedalShift pedalThe shift pedal is located on the left
side of the engine and is used in
combination with the clutch when
shifting.
Use your toe or heel to shift up and
your toe to shift down.
1. Front brake leverFront brake leverThe front brake lever is located on
the right handlebar. Pull it toward the
handlebar to apply the front brake.
1 Rear brake pedalRear brake pedalThe rear brake pedal is on the right
side of the Motorcycle. Press down on
the brake pedal to apply the rear
brake.
INSTRUMENT AND CONTROL FUNCTIONS
USE BOTH BRAKES SIMULTANEOUSLY
3-4

This tank cap cannot be closed
unless the key is in the lock. The key
cannot be removed if the cap is not
locked properly.
Be sure the cap is properly
installed and locked in place
before riding the Motorcycle.WARNING
1. Filler tube
2. Fuel levelFuelMake sure there is sufficient fuel in the
tank. Fill the fuel tank to the bottom of
the filler tube as shown in the
illustration.
Do not overfill the fuel tank. Avoid
spilling fuel on the hot engine. Do
not fill the fuel tank above the
bottom of the filler tube to avoid
Spillage
1. OpenFuel tank capTO OPEN:
Insert the key and turn it 1/4 turn
clockwise. The lock will be released
and the cap can be opened.
TO CLOSE:
Push the tank cap into position with
the key inserted. To remove the key,
turn it counterclockwise to the
original position.
Ensure the arrow on fuel tank is
towards the Front of the bike when
inserting Fuel Tank Cap in Fuel
Tank.
INSTRUMENT AND CONTROL FUNCTIONS
NOTE :
3-5
WARNING
WARNING
1
2
1
1. Arrow
1¿

Always wipe off spilled fuel
immediately with a dry and clean
soft cloth. Fuel may deteriorate
painted surfaces or plastic parts.
Recommended Fuel :
Fuel tank capacity :Regular gasoline (Petrol)
Total :
13.0 L
Reserve :
1.7 L
1. Arrow markFuel cockThe fuel cock supplies fuel from the
tank to the carburetor while filtering it
also.
The fuel cock has three positions,
which should be set as shown in the
illustrations.
OFF: With the fuel cock in this
position, fuel will not flow.
Always set the fuel cock to this
position when the engine is not
running.
1. Arrow markON: With the fuel cock in this
position, fuel flows to the
carburettor. Set the fuel cock to
this position when starting the
engine and while riding.
INSTRUMENT AND CONTROL FUNCTIONS
3-6
CAUTION :
IT IS A GOOD PRACTICE TO RETURN THE FUEL COCK LEVER TO
"Off" POSITION WHEN ENGINE IS NOT RUNNING
OFF
1
1
ON