2007 YAMAHA YBR125 lights

ROAD SAFETY TIPS....................................... 1-1
DESCRIPTION................................................ 2-1
Left view ........................................................ 2-1
Right view ...................................................... 2-2
Controls/Instruments................................... 2-3
INSTRUMENT AND CONTROL
FUNCTIONS.................................................... 3-1
Main switch cum steering lock ..................... 3-1
Speedometer................................................ 3-2
Fuel gauge .................................................... 3-2
Indicator lights .............................................. 3-2
Handlebar switches ..................................... 3-3
Clutch lever ................................................... 3-3
Shift pedal ..................................................... 3-4
Front brake lever ........................................... 3-4
Rear brake pedal .......................................... 3-4
Fuel tank cap ................................................ 3-5
Fuel............................................................... 3-5
Fuel cock ....................................................... 3-6
Starter Lever .................................................. 3-7
Kick starter .................................................... 3-7
Seat............................................................... 3-8Storage compartment .................................. 3-9
Rear shock absorber adjustment ............... 3-9
Handle Seat, Lifting Handle, stay Lock .......3-10
PRE-OPERATION CHECKS ........................... 4-1
Pre-operation check list ............................... 4-1
OPERATION AND IMPORTANT RIDING
POINTS............................................................ 5-1
Starting and warming up a
cold engine ................................................... 5-1
Starting a warm engine ................................ 5-2
Shifting.......................................................... 5-2
Tips for reducing fuel consumption ............. 5-3
Running-in.................................................... 5-3
Parking.......................................................... 5-4
PERIODIC MAINTENANCE AND MINOR
REPAIR ............................................................ 6-1
Tool kit ........................................................... 6-1
Preventive maintenance schedule .............. 6-3
Panel removal and installation .................... 6-5
Spark plug inspection .................................. 6-7
Engine OIl ..................................................... 6-8
1
4
23
65
TABLE OF CONTENTS
Libero5TS8.pmd11/3/2006, 8:50 PM 1

ROAD SAFETY TIPS
SAFE RIDING
1. Before riding, you should learn to ride your motorcycle properly and all the control functions should be known
to you.
2. Remember that there are no legal “rights” when it comes to survival as far as Motorcyclists are
concerned. The fact that you may be well within your rights is no guarantee that you will avoid a collision with
a bigger vehicle whose driver fails to see you. Always ride defensively and take nothing on road for granted.
3. Develop the ability to react swiftly to any unexpected road hazards or emergencies giving yourself time to
spare for appropriate response.
4. Develop the ability to get the most out of your Motorcycle, But at the same time get to know its capabili-
ties and limitations.
5. Ride thoughtfully, planning your route well in advance.
6.Give proper Signals and use Horn and Headlights judiciously.
7. Don’t ride in another motorist’s blind spot.
8. Always make pre-ride safety checks before you start the Engine.
SAFE BRAKING
Use the basic methods of braking effectively.
1. Engine Brake : When the Throttle is released, compression backs up and acts as the Engine Brake.
If the riding condition allows, reduce speed by shifting the Gear down.
2. Front and Rear Brakes : It is important to apply equal force to the Front and Rear Brakes simultaneously.
• Use Front and Rear Brakes simultaneously.
• Be sure not to disengage the clutch while braking.
• While riding downhill always use Engine as a Brake and never ride in Neutral Gear.
• While riding down hill do not switch off ignition while Engine is in gear. CAUTION :
1-1
Libero5TS8.pmd11/3/2006, 8:50 PM 3

INSTRUMENT AND CONTROL FUNCTIONS
3-2
1. Turn indicator light “ ”
2. Neutral ”N”
3. High beam.Indicator light “ ” 1. Speedometer
2. Odometer1. Fuel gauge
1
1
2SpeedometerThe speedometer shows riding
speed.
This speedometer is equipped with
an odometer.
Fuel gaugeThe fuel gauge indicates the quantity
of the remaining petrol in the fuel tank.
The gauge needle moves from “F”
(Full) to"E”(Empty) as the fuel level
decreases.
When the needle comes below “E”
please refill the fuel tank at the
earliest.
Indicator lights1. Turn indicator light " "
2. Neutral indicator light "N"
3. High beam indicator light " "The indicator flashes when the
turn switch is moved to the left or
right. .
This indicator comes on when the
transmission is in neutral.
This indicator comes on when the
headlight high beam is used.
1
2
3

Turn signal switch
Horn switch " "
Lights switch To signal a right-hand turn, push the
switch to " ". To signal a left-
hand turn, push the switch to " ".
Once the switch is released it will
return to the center position. To
cancel the signal, push the switch in
after it has returned to the center
position.
Press the switch to sound the horn.
Turning the light switch to " ",
turns on the meter light and tail-light.
Turning the light switch to “ ",
turns the headlight on also.
1. Clutch leverClutch leverThe clutch lever is located on the left
handlebar. Pull the clutch lever to
the handlebar to disengage the
clutch, and release the lever to
engage the clutch. The lever should
be pulled rapidly and released slowly
for smooth clutch operation.
INSTRUMENT AND CONTROL FUNCTIONS
3-3
1. PassSwitch " "
2. Dimmer Switch
3. Light switch
4. Turn signal cum cancellation switch“ “
5. Horn switchHandlebar switchesDimmer switch
Turn the switch to" " for the high
beam and to " " for the low beam. Pass switch""
Press the switch to operate the
Passing Light.
1
1
2
3
4 5

If any item in the Pre-Operation Check is not working properly, have it inspected and repaired before operating
the Motorcycle.WARNINGFuel gauge
Check for proper operation
/Function
3.2
PRE-OPERATION CHECKS
4-2
Fuel Tank Brake and clutch lever pivots
Battery Lights, signals and switches Chassis fasteners Center and sidestand pivot
Make sure that all nuts, bolts, and screws are properly tightened.
Tighten if necessary.
Check fuel level.
Fill with fuel if necessary.
Fill with distilled water if necessary. Check fluid level. Check for proper operation.
6-24~ 6-26 3-3, 6-27 ~ 6-283-5 ~ 3-7
Lubricate if necessary. Check for smooth operation.
Lubricate if necessary. Check for smooth operation.
ITEM CHECKS
6-22PAGE6-22
-
IF WAITING AT TRAFFIC SIGNAL IS FOR LONG, SWITCH OFF THE ENGINE
TO PROTECT THE ENVIRONMENT AND TO LOWER FUEL CONSUMPTION

OPERATION AND IMPORTANT RIDING POINTS
Tips for reducing fuel
consumptionYour Motorcycle's fuel consumption
depends to a large extent on your
riding style. The following tips can
help reduce fuel consumption:
1. Warm up the engine before riding.
2. Move the strater Lever to “Off” as
soon as possible.
3. Shift up swiftly and avoid high
engine speeds during
acceleration.
4. Do not double-clutch or rev the
engine while shifting down and
avoid high engine speeds with no
load on the engine.
5. Turn off the engine instead of
letting it idle for an extended
length of time, i.e. in traffic jams, at
traffic lights or rail- road crossings.
6. Do not drive with excessive load
on the Motorcycle.
7. Plan your route in advance.
Running-inThere is never a more important
period in the life of your Motorcycle
than the period between zero and
1,000 kms. For this reason we ask
that you carefully read the following
material. Because the engine is brand
new, you must not put an excessive
load on it for the first 1,000 kms. The
various parts in the engine wear and
polish themselves to the correct
operating clearances. During this
period, prolonged full throttle
operation, or any condition which
might result in excessive heating of
the engine, must be avoided.Be sure to replace the engine
oil as per recommended
schedule.
1,000 kms and below :
Avoid prolonged full-throttle
operation. Vary speed
occasionally.
5-3
CAUTION :
8. Avoid frequent braking.
9. Always maintain your tyre
pressure as per recommendation
10. Get your motorcycle serviced
periodically after every 2000 kms.
If any engine trouble should occur
during the "Running-in" period,
consult a YAMAHA dealer
immediately.
CAUTION :