2007 TOYOTA SIENNA Owners Manual

07 SIENNA_U (L/O 0612)
289
2007 SIENNA from Oct. ’06 Prod. (OM45437U)
SELECTING THE TITLE
To display the searching title screen, se-
lect the “Search” switch on the screen.
You can also display the screen by push-
ing the “SEARCH” button on the remote
control.
Select the title number by using the
joystick and push the “ENT” button to
enter the number. The player starts play-
ing disc for that title number. The selected
title number will appear on the screen.
Select the “Back” switch to return to the
menu screen.

07 SIENNA_U (L/O 0612)
290
2007 SIENNA from Oct. ’06 Prod. (OM45437U)
CHANGING THE SUBTITLE LANGUAGE
Select the “Sub Title” switch on the
screen, and then the changing subtitle lan-
guage screen will appear. You can also
display the screen by pushing the “SUB
TITLE” button on the remote control.
Each time you select the “Sub Title”
switch, another language stored on the
disc is selected.
To turn off the subtitles, select the “Hide
Buttons” switch.
Select the “Back” switch to return to the
previous screen.
The selected subtitle language will appear
on the screen.

07 SIENNA_U (L/O 0612)
291
2007 SIENNA from Oct. ’06 Prod. (OM45437U)
CHANGING AUDIO LANGUAGE
Select the “Audio” switch on the screen
and then the changing audio language
screen will appear. You can also display
the screen by pushing the “AUDIO” button
on the remote control.
Each time you select the “Audio” switch,
another language stored on the disc is
selected.
To turn off the audio language screen,
select the “Hide Buttons” switch.
Select the “Back” switch to return to the
previous screen.
The selected audio language will appear
on the screen.

07 SIENNA_U (L/O 0612)
292
2007 SIENNA from Oct. ’06 Prod. (OM45437U)
CHANGING ANGLE SCREEN
Select the “Angle” switch on the screen,
and then the changing angle screen will
appear. You can also display the screen
by pushing the “ANGLE” button on the
remote control.
The angle can be selected for discs that
are multi−angle compatible when the “
”
mark appears on the screen. Each time
you push the “ENT” button after selecting
the “Angle” switch, the angle changes.
The angle number which you can select
will appear on the screen.
To turn off the screen, select the “Hide
Buttons” switch.
Select the “Back” switch to return to the
previous screen.

07 SIENNA_U (L/O 0612)
293
2007 SIENNA from Oct. ’06 Prod. (OM45437U)
CHANGING THE INITIAL SETTING
Select the “Set Up” switch on the screen,
and then the initial setting screen will ap-
pear. You can also display the screen by
pushing the “SET UP” button on the re-
mote control. You can change the initial
setting.
After the setting is done, the player plays
from the beginning of the chapter or the
track.
Setup Menu screen
There are initial setting switches on the
“Setup Menu” screen.
After you change the initial setting, select
the “Enter” switch. The initial setting
switch will be turned off and return to the
picture previously.
When the “Default” switch is pushed, all
menus are initialized.

07 SIENNA_U (L/O 0612)
294
2007 SIENNA from Oct. ’06 Prod. (OM45437U)
CHANGING THE AUDIO LANGUAGE
Select the “Audio Language” switch on the
“Setup Menu” and the “Select Audio
Lang.” screen appears.
Select the language you want to hear by
pushing the appropriate switch on the
screen.
To return to the “Setup Menu” screen,
select the “Back” switch.
If you cannot find the language you want
to hear, select the “Others” switch. The
“Enter Audio Lang. Code” screen will ap-
pear.To select an audio language, use the joys-
tick to enter the appropriate 4−digit lan-
guage code. For details of the language
codes, see the language code list.
If a code which is not on the list is en-
tered and the “ENT” button is pushed, the
“Incorrect Code” screen will appear. Enter
the code of the language you want to hear
again.
To return to the “Select Audio Lang.”
screen, select the “Back” switch.CHANGING THE SUBTITLE LANGUAGE
To display the “Select Subtitle Lang.”
screen, select the “Subtitle Language”
switch on the “Setup Menu” screen.
Select the language you want to read by
selecting the appropriate switch on the
screen.
To return to the “Setup Menu” screen,
select the “Back” switch.
If you cannot find the language you want
to read, select the “Others” switch. The
“Enter Subtitle Lang. Code” screen will
appear.

07 SIENNA_U (L/O 0612)
295
2007 SIENNA from Oct. ’06 Prod. (OM45437U)
To enter the code of the language you
want to read, use the joystick to enter the
appropriate 4−digit language code. For de-
tails about the language codes, see the
language code list.
Push the “ENT” button on the remote con-
trol. If numbers which are not on the list
are entered and the “ENT” button is
pushed, the “Incorrect code” screen will
appear. Enter the language code you want
to read again.
To return to the “Select Subtitle Lang.”
screen, select the “Back” switch on the
screen.CHANGING THE DVD LANGUAGE
To display the “Select DVD Lang.” screen,
select the “DVD Language” switch on the
“Setup Menu” screen.
Select the language you want to read on
the screen.
To return to the “Setup Menu” screen,
select the “Back” switch.
If you cannot find a language you want to
read, select the “Others” switch. The “En-
ter DVD Lang. Code” screen will appear.To enter the code of the language you
want to read, use the joystick to enter the
appropriate 4 −digit language code. For de-
tails about the language codes, see the
language code list.
Push the “ENT” button on the remote con-
trol. If numbers which are not on the list
are entered and the “ENT” button is
pushed, the “Incorrect code” screen will
appear. Enter the language code you want
to read again.
To return to the “Select DVD Lang.”
screen, select the “Back” switch on the
screen.

07 SIENNA_U (L/O 0612)
296
2007 SIENNA from Oct. ’06 Prod. (OM45437U)
TURNING THE ANGLE MARK ON OR
OFF
The angle mark can be turned on for
discs that are multi−angle compatible.
Each time you select the “Angle Mark”
switch on the screen, the angle mark
turns on or off alternately.SETTING LEVEL OF VIEWER
RESTRICTIONS
You can restrict the play back screen by
setting the viewer restrictions. You can
prevent the restriction with a password.
Some discs do not supply a restriction.
To set the level of viewer restriction, se-
lect the “Parental Lock” switch on the
“Setup Menu” screen. The “Enter Personal
Code” screen will appear.Enter the password and push the “ENT”
button. The “Select Restriction Level”
screen will appear.
You cannot change the setting without in-
putting the password. When you forget or
change the password, push the “ ” side
of the joystick ten times to initialize the
password.
To return to the “Setup Menu” screen,
select the “Back” switch.