2006 LAND ROVER FRELANDER 2 transmission

Publi s hed: 11-May-2011
Automatic Transmission/Transaxle - Transmission Fluid Drain and RefillTD4
2.2L Diesel
General Procedures W ARNING: Observe due care when drai ning, as the flui d can be very hot .
Ens ure t hat the aut omat ic trans mi s si on is in 'P' and t he handbrake is
ful ly appli ed.
1.
Clean t he area around the trans mi s si on fl uid fil ler plug.
2. Remove t he transmis si on fluid fil ler plug.
3.
4. W ARNING: Do not work on or under a vehi cle s upported onl y
by a jack. Al ways support t he vehi cl e on s afet y s tands .
• NOTE: Make s ure that t he vehi cl e is st andi ng on a level s urface.
Rais e and s upport t he vehi cl e.
4.
Remove t he front unders hiel d.
Refer t o: Engi ne Unders hi eld (501-02 Front End Body Panel s ,
Removal and Ins tall ati on).
5.
Clean t he area around the trans mi s si on fl uid l evel and drai n plugs .
6.
Place a contai ner under the t rans mi ss i on.
7.

Publi s hed: 11-May-2011
Automatic Transmission/Transaxle - Selector Shaft SealI6 3.2L Petrol
Removal and Inst all ati on
Removal
• NOTE: Removal s t eps in t his procedure may cont ain i nst all ati on det ail s.
1. W ARNING: Make sure t o s upport the vehicle wit h axles tands .
Rais e and s upport t he vehi cl e.
1.
Remove t he cover and dis connect the bat tery ground cabl e.
Refer t o: Specificati ons (414-00 Bat tery and Charging Sys tem -General Informat ion, Specificati ons).
2.
Remove t he transmis si on cont rol module (TCM).
Refer t o: Transmis s ion Control Modul e (TCM) - I6 3.2L Petrol (307-01Automat ic Transmis si on/Trans axl e, Removal and Ins t allat ion).
3.
4. CAUTIONS:
Take extra care not t o damage t he mati ng faces .
"Make s ure t hat a new component i s ins t al led. "
4.
Installation
1. CAUTIONS:
Make s ure that t he mat ing faces are clean and free of foreignmat eri al .
Ins tall t he s eal , fl ush wit h t he transmis s ion case.
To i nst all , revers e t he removal procedure.
1.

Publi s hed: 11-May-2011
Automatic Transmission/Transaxle - Selector Shaft SealTD4 2.2L Diesel
Removal and Inst all ati on
Removal
• NOTE: Removal s t eps in t his procedure may cont ain i nst all ati on det ail s.
1. W ARNING: Make sure t o s upport the vehicle wit h axles tands .
Rais e and s upport t he vehi cl e.
1.
Remove t he cover and dis connect the bat tery ground cabl e.
Refer t o: Specificati ons (414-00 Bat tery and Charging Sys tem -General Informat ion, Specificati ons).
2.
Remove t he transmis si on cont rol module (TCM).
Refer t o: Transmis s ion Control Modul e (TCM) - TD4 2.2L Di es el(307-01 Automat ic Trans mi s si on/Trans axl e, Removal andInst all at ion).
3.
4. CAUTIONS:
Take extra care not t o damage t he mati ng faces .
"Make s ure t hat a new component i s ins t al led. "
4.
Installation
1. CAUTIONS:
Make s ure that t he mat ing faces are clean and free of foreignmat eri al .
Ins tall t he s eal , fl ush wit h t he transmis s ion case.
To i nst all , revers e t he removal procedure.
1.

Publi s hed: 11-May-2011
Automatic Transmission/Transaxle - Transmission Control Module (TCM)I6
3.2L Petrol
Removal and Inst all ati on
Removal
1. W ARNING: Make sure t o s upport the vehicle wit h axles tands .
Rais e and s upport t he vehi cl e.
1.
Remove t he cover and dis connect the bat tery ground cabl e.
Refer t o: Specificati ons (414-00 Bat tery and Charging Sys tem -General Informat ion, Specificati ons).
2.
Remove t he A/C compress or mounti ng bracket .
Refer t o: Acces sory Dri ve Component Bracket (303-05A Access oryDrive - I6 3.2L Pet rol , Removal and Ins t al lat ion).
3.
Releas e and dis connect the sel ect or l ever cable.4.
Releas e t he s upport bracket.5.

Publi s hed: 11-May-2011
Automatic Transmission/Transaxle - Transmission Control Module
(TCM)TD4 2.2L Diesel
Removal and Inst all ati on
Removal
1. W ARNING: Make sure t o s upport the vehicle wit h axles tands .
Rais e and s upport t he vehi cl e.
1.
Remove t he cover and dis connect the bat tery ground cabl e.
Refer t o: Specificati ons (414-00 Bat tery and Charging Sys tem -General Informat ion, Specificati ons).
2.
Remove t he air cleaner as s embly.
Refer t o: Air Cleaner (303-12A Intake Ai r Dis tribut ion and Fil tering -I6 3.2L Pet rol, Removal and Ins t al lat ion).
3.
Releas e and dis connect the sel ect or l ever cable.4.
Remove t he transmis si on s elector lever.5.

Publi s hed: 11-May-2011
Automatic Transmission/Transaxle - Torque Converter SealI6 3.2L Petrol
Removal and Inst all ati on
Special T ool(s) 307-597
Inst all er, Torque Converter Seal 307-613
Hol di ng Pins , Torque Converter
Removal 1. W ARNING: Make sure t o s upport the vehicle wit h axle
s tands .
Rais e and s upport t he vehi cl e.
1.
Remove t he cover and dis connect the bat tery ground cabl e.
Refer t o: Specificati ons (414-00 Bat tery and Charging Sys tem -
General Informat ion, Specificati ons).
2.
Remove t he transmis si on and convert er.
Refer t o: Transmis s ion - I6 3.2L Pet rol (307-01 Automat ic
Trans mi ss ion/Transaxle, Removal).
3.
Remove t he torque convert er retai ner.
4. 5.
CAUTIONS: Be prepared t o collect es caping oi l.
Make s ure that all openings are sealed.
Remove t he torque convert er.
Speci al Tool (s ): 307-613 5.

Publi s hed: 11-May-2011
Automatic Transmission/Transaxle - Torque Converter SealTD4 2.2L Diesel
Removal and Inst all ati on
Special T ool(s) 307-597
Inst all er, Torque Converter Seal 307-613
Hol di ng Pins , Torque Converter
Removal 1. W ARNING: Make sure t o s upport the vehicle wit h axle
s tands .
Rais e and s upport t he vehi cl e.
1.
Remove t he cover and dis connect the bat tery ground cabl e.
Refer t o: Specificati ons (414-00 Bat tery and Charging Sys tem -
General Informat ion, Specificati ons).
2.
Remove t he transmis si on and convert er.
Refer t o: Transmis s ion - TD4 2.2L Dies el (307-01 Aut omati c
Trans mi ss ion/Transaxle, Inst all ati on).
3.
Remove t he torque convert er retai ner.
4. 5.
CAUTIONS: Be prepared t o collect es caping oi l.
Make s ure that all openings are sealed.
Remove t he torque convert er.
Speci al Tool (s ): 307-613 5.

Publi s hed: 11-May-2011
Automatic Transmission/Transaxle - Input Shaft Speed (ISS) SensorI6 3.2L
Petrol
Removal and Inst all ati on
Removal CAUTION: Extreme cleanli nes s mus t be exercis ed when handli ng thes e component s.
• NOTE: Removal s t eps in t his procedure may cont ain i nst all ati on det ail s.
1. W ARNING: Make sure t o s upport the vehicle wit h axle
s tands .
Rais e and s upport t he vehi cl e.
1.
Remove t he val ve body.
Refer t o: Main Cont rol Valve Body (307-01 Aut omat ic
Trans mi ss ion/Transaxle, Removal and Ins tal lati on).
2. 3. CAUTION: Extreme cleanli nes s mus t be
exercis ed when handl ing t his component .
T orque: 6 Nm 3.
Installation To i nst all , revers e t he removal procedure.
1.