2005 TOYOTA AVENSIS oil

A77437
Cylinder Head
Cylinder Block
Seal Packing
Cylinder
Head Gasket
2.5 to 3 mm
1.25 to 1.5 mm
A7741012
3 4
109 85
67
A00976A77411
90_
Engine
Front
Paint Mark
A83497
14−82
− ENGINE MECHANICALCYLINDER HEAD GASKET (2AZ−FSE)
AVENSIS Supplement (RM1045E)
63. INSTALL CYLINDER HEAD SUB−ASSY
HINT:
The cylinder head set bolts are tightened in the 2 successive
steps.
(a) Apply a continuous bead (Diameter 2.5 to 3 mm (0.098 to
0.118 in.)) of seal packing as shown in the illustration.
Seal packing: Part No. 08826−00080 or equivalent
NOTICE:
SRemove any oil from contact surface.
SInstall the cylinder head within 3 minutes after apply-
ing seal packing.
SAfter installing the cylinder head, cylinder head bolts
must be tightened within 15 minutes.
SDo not start the engine within 2 hours of installation.
(b) Apply a light coat of engine oil on the threads of the cylin-
der head bolts.
(c) Install bolts and plate washers to the cylinder head.
NOTICE:
Do not drop the washers into the cylinder head.
(d) Using several steps, install and tighten the 10 cylinder
head bolts and plate washers with a 10 mm bi−hexagon
wrench uniformly in the sequence shown in the illustra-
tion.
Torque: 79 N
m (806 kgf
cm, 58 ft
lbf)
(e) Mark the front side of the cylinder head set bolts with
paint.
(f) Retighten the cylinder head set bolts by 90_in the same
sequence as a step (d).
(g) Check that each paint mark is now at a 90_angle to the
front.
(h) Install the camshaft housing plug as shown in the illustra-
tion.

A83481
−
ENGINE MECHANICAL CYLINDER HEAD GASKET (2AZ −FSE)
14 −83
AVENSIS Supplement (RM1045E)
(i) Install the water by −pass pipe with a bolt.
Torque: 9.0 N
m (92 kgf
cm, 80 in.
lbf)
64. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSY
65. INSTALL CAMSHAFT (See page 14 −64)
66. INSTALL NO.2 CAMSHAFT (See page 14 −64)
67. INSTALL EXHAUST MANIFOLD CONVERTER SUB −ASSY (See page 14 −23)
68. INSTALL EXHAUST MANIFOLD HEAT INSULATOR NO.1 (See page 14 −23)
69. INSTALL INTAKE MANIFOLD (See page 11 −13)
70. INSTALL THROTTLE BODY ASSY (See page 10 −8)
71. INSTALL AIR CLEANER ASSEMBLY WITH HOSE (See page 14 −23)
72. INSTALL BATTERY
Torque:
5.0 N
m (51 kgf
cm, 44 in.
lbf) for Bolt
3.5 N
m (36 kgf
cm, 31 in.
lbf) for Nut
73. INSTALL CHAIN VIBRATION DAMPER NO.1 (See page 14 −45)
74. INSTALL CHAIN SUB −ASSY (See page 14 −45)
75. INSTALL TIMING CHAIN GUIDE (See page 14 −45)
76. INSTALL CHAIN TENSIONER SLIPPER (See page 14 −45)
77. INSTALL CRANKSHAFT POSITION SENSOR PLATE NO.1 (See page 14 −45)
78. INSTALL TIMING CHAIN OR BELT COVER SUB −ASSY (See page 14 −45)
79. INSTALL V −RIBBED BELT TENSIONER ASSY (See page 14 −45)
80. INSTALL OIL PAN SUB −ASSY (See page 14 −45)
81. INSTALL CRANKSHAFT POSITION SENSOR (See page 14 −45)
82. INSTALL CRANKSHAFT PULLEY (See page 14 −45)
SST 09213 −54015 (91651 −60855), 09330 −00021
83. INSTALL CHAIN TENSIONER ASSY NO.1 (See page 14 −45)
84. INSTALL TRANSVERSE ENGINE ENGINE MOUNTING INSULATOR
Torque: 52 N
m (530 kgf
cm, 38 ft
lbf)
85. INSTALL ENGINE MOUNTING BRACKET NO.2 RH (See page 14 −45)
86. INSTALL CYLINDER HEAD COVER SUB −ASSY (See page 14 −45)
87. INSTALL COOLER BRACKET (LHD STEERING POSITION TYPE)
Torque: 9.0 N
m (92 kgf
cm, 80 in.
lbf)
88. INSTALL ENGINE SERVICE COVER BRACKET RH (RHD STEERING POSITION TYPE) Torque: 9.0 N
m (92 kgf
cm, 80 in.
lbf)
89. INSTALL OIL RESERVOIR BRACKET NO.1 Torque: 8.0 N
m (82 kgf
cm, 71 in.
lbf)
90. INSTALL COOLER REFRIGERANT SUCTION HOSE NO.1 (LHD STEERING POSITION TYPE)
91. INSTALL RETURN TUBE SUB −ASSY
Torque: 8.0 N
m (82 kgf
cm, 71 in.
lbf)
92. INSTALL IGNITION COIL ASSY
Torque: 9.0 N
m (92 kgf
cm, 80 in.
lbf)
93. INSTALL FUEL PUMP ASSY (See page 11 −24)

14−84
−
ENGINE MECHANICAL CYLINDER HEAD GASKET (2AZ −FSE)
AVENSIS Supplement (RM1045E)
94. INSTALL FUEL PIPE SUB −ASSY NO.1 (See page 11 −24)
SST 09023 −12900
95. INSTALL FUEL TUBE SUB −ASSY (See page 11 −24)
96. INSTALL FUEL PRESSURE PULSATION DAMPER ASSY (See page 11 −24)
97. INSTALL ENGINE COVER SUB −ASSY NO.1
Torque: 7.0 N
m (71 kgf
cm, 62 in.
lbf)
98. INSTALL VANE PUMP ASSY Torque: 37 N
m (377 kgf
cm, 27 ft
lbf)
99. INSTALL EXHAUST PIPE ASSY FRONT (See page 15 −2)
100. INSTALL GENERATOR ASSY (See page 19 −8)
101. INSTALL FAN AND GENERATOR V BELT (See page 14 −5)
SST 09249 −63010
102. ADD COOLANT (See page 16 −7)
103. ADD ENGINE OIL (See page 17 −6)
104. CHECK FOR ENGINE COOLANT LEAKS (See page 16 −1)
105. CHECK FOR ENGINE OIL LEAKS
106. CHECK FOR FUEL LEAKS (See page 11 −4)
107. INSTALL FRONT WHEEL RH Torque: 103 N
m (1,050 kgf
cm, 76 ft
lbf)
108. ADD POWER STEERING FLUID (See Pub. No. RM1018E on page 51 −4)
109. BLEED POWER STEERING FLUID (See Pub. No. RM1018E on page 51 −4)
110. CHECK POWER STEERING FULUID LEVEL IN RESERVOIR
(See Pub. No. RM1018E on page 51 −4)
111. CHECK FUNCTION OF THROTTLE BODY

A89212
N·m (kgf·cm, ft·lbf)
: Specified torque
zNon−reusable partzGasketCooler Bracket
(LHD Steering Position Type)
113 (1,152, 83)
Cooler Refrigerant Suction Hose No. 1
(LHD Steering Position Type)
8.0 (82, 44 in.
lbf)
8.0 (82, 44 in.
lbf)
52 (530, 38)
Transverse Engine Engine
Mounting Insulator
Vane Pump Oil Reservoir Assy
Return Tube Sub−assy
52 (530, 38)
21 (214, 16)
9.8 (100, 7.2)
Generator Assy
Exhaust Pipe Assy Front
43 (440, 32)
43 (440, 32)
7.0 (71, 62 in.
lbf)
7.0 (71, 62 in.
lbf)
Oil Reservoir Bracket No. 1
52 (530, 38)
52 (530, 38)
Engine Mounting Bracket No. 2 RH
7.0 (71, 62 in.
lbf)
8.0 (82, 71 in.
lbf)
8.0 (82, 71 in.
lbf)
52 (530, 38)
Exhaust Pipe Assy Center
52 (530, 38)
52 (530, 38)
Vane Pump Assy
zGasket
8.0 (82, 44 in.
lbf)
37 (377, 27)
14−70
− ENGINE MECHANICALCYLINDER HEAD GASKET (2AZ−FSE)
AVENSIS Supplement (RM1045E)

A77327
N·m (kgf·cm, ft·lbf)
: Specified torque
zNon−reusable partzGasket
9.0 (90, 80 in.
lbf)
Chain Tensioner Assy No. 1
Timing Chain or Belt Cover Sub−assy
Crank Position Sensor
9.0 (90, 80 in.
lbf)
V−ribbed Belt Tensioner
Sub−assy
60 (610, 44)
60 (610, 44)
9.0 (92, 80 in.
lbf)
170 (1,735, 125)
Crankshaft Pulley
Chain Sub−assy
25 (255, 18)
Chain Tensioner
Slipper
19 (195, 14)
Camshaft Position
Sensor Plate No. 1
Oil Pump
Drive Gear
Chain Vibration
Damper No. 1
zOil Seal
Timing Chain Guide
9.0 (90, 80 in.
lbf)
Oil Pan Sub−assy
9.0 (90, 80 in.
lbf)
9.0 (90, 80 in.
lbf)
11 (112, 8.1)
43 (440, 32)
9.0 (90, 80 in.
lbf)
x2
x5
x8
x2x12
Grease application
− ENGINE MECHANICALCYLINDER HEAD GASKET (2AZ−FSE)
14−75
AVENSIS Supplement (RM1045E)

A93078
12 (122, 9.0)
60 (607, 44)
N·m (kgf·cm, ft·lbf)
: Specified torque
zNon−reusable partV−ribbed Belt
Tensioner Assy
Oil Level Gage
Sub−assy
Exhaust Manifold Insulator
zGasket
37 (378, 27)
x5
Manifold Stay No. 1
44 (449, 32)
Exhaust Manifold Converter Sub−assy
Manifold Stay No. 2
44 (449, 32)
zO−ring
Oil Level Gage Guide
12 (122, 9.0)
12 (122, 9.0)
− ENGINE MECHANICALCYLINDER HEAD GASKET (2AZ−FSE)
14−77
AVENSIS Supplement (RM1045E)

A90928
N·m (kgf·cm, ft·lbf) : Specified torque
z Non −reusable part
1st: 79 (800, 58)
2st: Turn 90 _
See page (14
−79)
30 (301, 22)
30 (301, 22)
Bearing Cap No. 1
Bearing Cap No. 2
9.0 (92, 80 in.
lbf)
9.0 (92, 80 in.
lbf)
z Cylinder Head Gasket
Cylinder Head
9.0 (92, 79 in.

lbf)
z O−ring
WasherCamshaft Bearing No. 2
Camshaft Timing
Oil Control Valve
Camshaft Housing Plug
Camshaft
Bearing Cap No. 3
No. 2 Camshaft
14
−78
−
ENGINE MECHANICAL CYLINDER HEAD GASKET (2AZ −FSE)
AVENSIS Supplement (RM1045E)

A93084
N·m (kgf·cm, ft·lbf)
: Specified torque
zNon−reusable part
43 (440, 32)
zGasketzGasket
8.0 (82, 71 in.
lbf)
8.0 (82, 71 in.
lbf)
8.0 (82, 71 in.
lbf)
5.0 (51, 44 in.
lbf)
Vane Pump Oil
Reservoir Assy
Return Tube
Sub−assy
Radiator Reserve
Tank Sub−assy
43 (440, 32)
43 (440, 32)
30 (306, 22)
43 (440, 32)
Exhaust Pipe Assy FrontExhaust Pipe Assy Center
Floor Panel Brace FrontzGasket
x3
− ENGINE MECHANICALPARTIAL ENGINE ASSY (2AZ−FSE)
14−13
AVENSIS Supplement (RM1045E)