2004 MITSUBISHI ENDEAVOR wiring

[x] Cancel search: wiring

Page 2746 of 3870

MITSUBISHI ENDEAVOR 2004  Service Repair Manual and junction block connector C-211 (terminal 3) in good condition?  
YES: Go to Step 4.  
NO: Repair the wiring harness as necessary. Check if the all heated door 
mirrors works normally.  
STEP 4. Ch

Page 2747 of 3870

MITSUBISHI ENDEAVOR 2004  Service Repair Manual YES: Go to Step 5.  
NO: Repair or replace the damaged connector. Check if the all heated 
door mirrors works normally.  
STEP 5. Check the wiring harness between joint connector (2) C-104 
(terminal

Page 2749 of 3870

MITSUBISHI ENDEAVOR 2004  Service Repair Manual Fig. 9: Identifying Connector C 
- 29
 
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA. 
Q: Is the wiring harness between joint connector (2) C-104 (terminal 23) 
and remote controlled mirror (LH) conn

Page 2750 of 3870

MITSUBISHI ENDEAVOR 2004  Service Repair Manual Fig. 10: Identifying Connector E 
- 01
 
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA. 
Q: Is remote controlled mirror (RH) connector E-01 in good condition?  
YES: Go to Step 7.  
NO: Repair or repl

Page 2753 of 3870

MITSUBISHI ENDEAVOR 2004  Service Repair Manual Fig. 13: Identifying Connector C 
- 13
 
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA. 
Q: Is the wiring harness between joint connector (2) C-104 (terminal 24) 
and remote controlled mirror (RH) con

Page 2755 of 3870

MITSUBISHI ENDEAVOR 2004  Service Repair Manual If the heater function (heated door mirror) of either of the door mirrors does not 
operate normally, it may be due to malfunctions in the heated door mirror circuit or 
door mirror. TROUBLESHOOTING H

Page 2761 of 3870

MITSUBISHI ENDEAVOR 2004  Service Repair Manual Fig. 18: Measuring Resistance Value Between Terminal 3 And Ground
 
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA. 
Q: Is the measured resistance 2 ohms or less?  
YES: Go to Step 6 .  
NO: Go to Step

Page 2763 of 3870

MITSUBISHI ENDEAVOR 2004  Service Repair Manual Fig. 20: Identifying Connector C 
- 29
 
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA. 
Q: Is the wiring harness between remote controlled mirror (LH) 
connector E-14 (terminal 3) and ground in good