Page 2693 of 3870
Fig. 11: Removing And Installing Knock Sensor
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
REMOVAL SERVICE POINT << A >> KNOCK SENSOR REMOVAL Use s
pecial tool MD998773 to remove the knock sensor.
2004 Mitsubishi Endeavor Limited 2004 ENGINE Ignition System - Endeavor
Page 2694 of 3870
Fig. 12: Removing Knock Sensor Using Special Tool (MD998773)
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
INSTALLATION SERVICE POINT >>A<< KNOCK SENSOR INSTALLATION Use special tool MD998773 to install the knock sensor. SPECIFICATIONS FASTENER TIGHTENING SPECIFICATIONS
2004 Mitsubishi Endeavor Limited 2004 ENGINE Ignition System - Endeavor
Page 2696 of 3870
SERVICE SPECIFICATIONS Fig. 15: Service Specifications Table
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
2004 Mitsubishi Endeavor Limited 2004 ENGINE Ignition System - Endeavor
Page 2697 of 3870
2004 BODY & ACCESSORIES
Instrument Panel Assembly - Endeavor
INSTRUMENT PANEL ASSEMBLY REMOVAL AND INSTALLATION The following bolts and screws are used for installing the instrument panel. Bolts
and screws are indicated as marks shown in the illustration in the sections of
"Removal and Installation" and "Disassembly and Assembly.
"
CAUTION:
For removal and installation of the passenger's
side air bag module, always observer the service
procedures described in AIR BAG RESTRAINT SYSTEMS
.
Refer to AIR BAG RESTRAINT SYSTEMS
. before
removing the passenger side air bag module.
Do not subject the SRS-ECU to any shocks when
removing or installing the instrument panel.
2004 Mitsubishi Endeavor XLS
2004 BODY & ACCESSORIES Instrument Panel Assembly - Endeavor
2004 Mitsubishi Endeavor XLS
2004 BODY & ACCESSORIES Instrument Panel Assembly - Endeavor
Page 2701 of 3870
Fig. 4: Identifying Clip And Claw Positions On Instrument Panel
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
REMOVAL SERVICE POINT << A >> CONNECTOR DISCONNECTION Disconnect the connectors shown in the illustration.
1. CLOCK SPRING CONNECTOR
(6)
2004 Mitsubishi Endeavor XLS
2004 BODY & ACCESSORIES Instrument Panel Assembly - Endeavor
Page 2704 of 3870
Fig. 7: Disassembling And Assembling Instrument Panel
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
INSTALLATION SERVICE POINT
2004 Mitsubishi Endeavor XLS
2004 BODY & ACCESSORIES Instrument Panel Assembly - Endeavor
Page 2714 of 3870
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA
.
REMOVAL SERVICE POINT << A >> FUEL RAIL, INJECTOR AND FUEL DAMPER < UP TO DECEMBER 2003 >, FUEL RAIL AND INJECTOR <
FROM JANUARY 2004 > REMOVAL Remove the fuel rail with the injectors and fuel damper attached to it. INSTALLATION SERVICE POINTS >>A<< INTAKE MANIFOLD GASKET INSTALLATION Install the gasket with the protrusions in the position illustrated.
Fig. 5: Installing Gasket
Courtes
y of MITSUBISHI MOTOR SALES OF AMERICA
.
CAUTION: Care must be taken when removing the fuel rail not
to drop the injector.
2004 Mitsubishi Endeavor Limited 2004 ENGINE Intake And Exhaust - Endeavor
Page 2721 of 3870
Required Special Tool
:
MD998770: Oxygen sensor wrench
REMOVAL SERVICE POINT << A >>HEATED OXYGEN SENSOR REMOVAL Use special tool MD998770 to remove the oxygen sensor.
Fig. 11: Using Special Tool (MD998770) To Remove Oxygen Sensor
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
INSTALLATION SERVICE POINT
2004 Mitsubishi Endeavor Limited 2004 ENGINE Intake And Exhaust - Endeavor
