2004 MITSUBISHI ENDEAVOR wiring

[x] Cancel search: wiring

Page 2348 of 3870

MITSUBISHI ENDEAVOR 2004  Service Repair Manual Fig. 257: Locating Connector C
-16 
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
 
Q: Is the wiring harness between A/C-ECU connector C-16 (terminal 3) 
and the battery in good condition?
  
YES:
 I

Page 2349 of 3870

MITSUBISHI ENDEAVOR 2004  Service Repair Manual Refer to 
HOW TO USE TROUBLESHOOTING/ INSPECTION 
SERVICE POINTS
 .  
NO:
 Repair the wiring harness. Check that the air conditioning works 
normall
y. 
 
2004 Mitsubishi Endeavor LS 
2004 HVAC Heater

Page 2351 of 3870

MITSUBISHI ENDEAVOR 2004  Service Repair Manual STEP 8. Measure the resistance at A/C-ECU connector C-17.
 
1. Disconnect A/C-ECU connector C-17, and measure at the wiring harness 
side. 
Fig. 259: Locating Connector C
-17 
Courtesy of MITSUBISHI M

Page 2352 of 3870

MITSUBISHI ENDEAVOR 2004  Service Repair Manual Fig. 260: Measuring Resistance Between Terminal 27 And Ground
 
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
 
Q: Does the measured resistance value correspond with this range?
  
YES:
 Replace the

Page 2353 of 3870

MITSUBISHI ENDEAVOR 2004  Service Repair Manual YES:
 It can be assumed that this malfunction is intermittent. 
Refer to 
HOW TO USE TROUBLESHOOTING/ INSPECTION 
SERVICE POINTS
 .  
NO:
 Repair the wiring harness. Check that the air conditioning wo

Page 2384 of 3870

MITSUBISHI ENDEAVOR 2004  Service Repair Manual Fig. 285: Identifying Connectors C
-310 And C
-308
 
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
 
<< B >> FRONT DECK CROSSMEMBER ASSEMBLY REMOVAL Disconnect the following connectors to gain access

Page 2385 of 3870

MITSUBISHI ENDEAVOR 2004  Service Repair Manual DISASSEMBLY AND ASSEMBLY C-13
DOOR WIRING HARNESS (RH) COMBINATION
C-14
CAPACITOR
C-15
INSTRUMENT PANEL WIRING HARNESS AND FRONT 
WIRING HARNESS COMBINATION
C-26
SRS-ECU
C-29
INSTRUMENT PANEL WIRING H

Page 2435 of 3870

MITSUBISHI ENDEAVOR 2004  Service Repair Manual Fig. 9: Identifying Connectors C
-104 And C
-120
 
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
 
DTC SET CONDITION 
DTC B1001 is set if there is a short circuit in the interior temperature sensor