2004 MITSUBISHI ENDEAVOR wiring

[x] Cancel search: wiring

Page 2315 of 3870

MITSUBISHI ENDEAVOR 2004  Service Repair Manual Fig. 229: Measuring Voltage Between Terminal 1 And Ground
 
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
 
STEP 9. Check the wiring harness between defogger relay connector C-
201 (terminal 1) and i

Page 2317 of 3870

MITSUBISHI ENDEAVOR 2004  Service Repair Manual Courtesy of MITSUBISHI MOTOR SALES OF AMERICA
. 
Q: Is the wiring harness between defogger relay connector C-201 
(terminal 1) and ignition switch (IG2) in good condition?
  
YES:
 Check that the defo

Page 2318 of 3870

MITSUBISHI ENDEAVOR 2004  Service Repair Manual Fig. 231: Locating Connector C
-16 
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
 
STEP 11. Check the wiring harness between defogger relay connector C-
201 (terminal 3) and A/C-ECU connector C-16 (

Page 2319 of 3870

MITSUBISHI ENDEAVOR 2004  Service Repair Manual Fig. 232: Locating Connector C
-16 
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
 
Q: Is the wiring harness between defogger relay connector C-201 
(terminal 3) and A/C-ECU connector C-16 (terminal

Page 2321 of 3870

MITSUBISHI ENDEAVOR 2004  Service Repair Manual Courtesy of MITSUBISHI MOTOR SALES OF AMERICA
. 
STEP 12. Check the wiring harness between defogger relay connector C-
201 (terminal 4) and defogger connector F-01 (terminal 1).
 
NOTE: Also check jun

Page 2323 of 3870

MITSUBISHI ENDEAVOR 2004  Service Repair Manual Q: Is the wiring harness between defogger relay connector C-201 
(terminal 4) and defogger connector F-01 (terminal 1) in good condition?
  
YES:
 Replace the A/C-ECU. The defogger should operate norm

Page 2326 of 3870

MITSUBISHI ENDEAVOR 2004  Service Repair Manual 1. Disconnect defogger connector F-05, and measure at the wiring harness 
side. 
Fig. 237: Locating Connector F
-05 
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
 
2. Measure the resistance value be

Page 2327 of 3870

MITSUBISHI ENDEAVOR 2004  Service Repair Manual Fig. 238: Measuring Resistance Between Terminal 1 And GroundCourtesy of MITSUBISHI MOTOR SALES OF AMERICA.
 
Q: Does the measured resistance value correspond with this range?
  
YES:
 Go to Step 16 .