Q: Is the stabilizer bar in good condition?
YES: Go to Step 2.
NO: Replace it, then go to Step 3 .
STEP 2. Check the strut assembly for damage.
Q: Is the strut assembly in good condition?
YES: Go to Step 3.
NO: Replace it, then go to Step 3.
STEP 3. Retest the system.
Q: Is the malfunction eliminated?
YES: The procedure is complete.
NO: Return to Step 1 .
INSPECTION PROCEDURE 3: Poor Ride DIAGNOSIS
STEP 1. Check for improper tire inflation pressure.
Q: Is the tire inflation correct?
YES: Go to Step 2.
NO: Adjust it, then go to Step 4 .
STEP 2. Check for broken or deteriorated coil spring(s).
Q: Are the coil spring(s) broken or deteriorated?
YES: Replace the coil spring(s), then go to Step 4 .
NO: Go to Step 3.
STEP 3. Check for strut assembly damage.
Q: Is the strut assembly damaged?
2004 Mitsubishi Endeavor LS 2004 SUSPENSION Front - Endeavor
STEP 4. Check the trailing arms for deformity or damage.
Q: Are the trailing arms in good condition?
YES: Go to Step 5.
NO: Replace the faulty part, then go to Step 5.
STEP 5. Retest the system.
Q: Is the malfunction eliminated?
YES: The procedure is complete.
NO: Return to Step 1 .
INSPECTION PROCEDURE 2: Poor Ride DIAGNOSIS
STEP 1. Check the excessive tire inflation pressure.
Refer to GROUP 31, On-vehicle Service - Tire Inflation Pressure Check P.31-
69.
Q: Is the tire inflation pressure in good condition?
YES: Go to Step 2.
NO: Adjust the pressure, then go to Step 4 .
STEP 2. Check for malfunction of shock absorbers (weak or broken
springs).
Q: Are the shock absorbers in good condition?
YES: Go to Step 3.
NO: Replace the faulty part, then go to Step 4 .
STEP 3. Check the stabilizer bar and/or stabilizer bar links for deformity
or damage.
Q: Are the stabilizer bar and/or stabilizer bar link deformed or damaged?
2004 Mitsubishi Endeavor LS 2004 SUSPENSION Rear - Endeavor
