Page 122 of 168
121 Navigation*
During route guidance
During route guidance
Using the soft keys, other menus or dis-
plays can be requested, and settings can
be adjusted during route guidance.
COMAND automatically hides the soft key
displays after a certain period of time.
Press any soft key while route guidance
is active
The soft key displays appear.Selectable soft keys:
Info soft key:
Allows access to the Info menu
(page 121).
Detour soft key:
Allows access to the Detour function
(page 123).
St-over soft-key:
Allows access to the stop-over function
(page 125).
Memory soft key:
Stores the current position
(page 127).
Display soft key:
For access to the Display menu
(page 127).
soft key:
The map scale will change to display a
more detailed map.
soft key:
The map scale will change to display a
map that shows a wider area.
The soft key displays are shown
(page 121).
Press the Info soft key.
The Info menu appears. This shows you
the main destination and a stopover
destination that may have been en-
tered.
Showing soft key displays
Info menu
s
Page 123 of 168
122 Navigation*During route guidance1Estimated time of arrival
2Remaining driving time in hours and
minutes
3Remaining journey (distance)
Points 1, 2 and 3 refer to the stop-
over destination. You'll only see the de-
tails for the final destination when you
arrive at your stopover and the system
has calculated the route to the main
destination.Selectable soft keys:
Route soft key:
Allows access to the display of the
route on the map (
page 122).
Mode soft key:
Allows access to the setting of the
route mode (
page 99).
In the Info menu (
page 121), press
the Route soft key.The map appears. The route remaining
is highlighted in blue color.
The destination is marked with a flag
, any stop-over destination is marked
with a flag . The current vehicle posi-
tion is identified with the symbol.
Depending on the distance to the des-
tination, it may take some time before
the route display appears.
iThe estimated time of arrival does not
refer to the time zone of destination,
but always refers to the time zone of
the vehicle's current location. For a
correct calculation, make sure that the
system clock is set correctly
(page 148).
Displaying the route on the map
s
Page 124 of 168
123 Navigation*
During route guidance
In the Info menu (
page 121), press
the Route soft key.
The route appears on the map.
Press the List soft key.
The list of road/route sections remain-
ing appears.
The road currently travelled on appears
at the top.
Press or to scroll through the
list.
Press the Page soft keys to scroll
through the list page by page.
The Detour function blocks a route seg-
ment ahead.
The length of this route segment can be
entered. The system then calculates a de-
tour route, if possible.Activate function and setting length of
route segment to be blocked
The soft key displays are shown
(page 121).
Press the Detour soft key.
If the detour function has already been
activated, then you can change the
length of the route segment to be
blocked (
page 124) or switch off the
function (page 124).
If the function has not been activated,
the system gives you a full-screen map
and freezes the map and screen show-
ing the position of the vehicle. You can
now set the distance of the route seg-
ment to be blocked.
Continue to press the soft key More or
Less until the desired distance for the
route segment to be blocked is set.
Displaying the route list
iDepending on the distance to the des-
tination, it may take a few moments be-
fore the route list is completed.
The list is completed only when the
route calculation is completed. Dest.
is displayed before the last list entry.Detour function
Page 125 of 168
124 Navigation*During route guidance
The distance of the route segment
blocked ahead appears in the status
bar. The section of the road that is
blocked appears as a red and white
dotted line on the map.
1Symbol = current position
Press .
The system calculates a new route
avoiding the blocked road segment.Switching OFF
Show the soft key displays
(page 121).
If a Detour is already active, the Detour
soft key is displayed in no color.
Press the Detour soft key.
Use to select the Delete detour
menu item.
Press.
The blocked road segment or detour re-
quirement is cancelled. The system re-
calculates the route.
Changing detour
The soft key displays are shown
(page 121).
Press the Detour soft key.
Page 126 of 168
125 Navigation*
During route guidance
Use to select the Change detour
menu item.
Press.
You can now enter a road segment to
be blocked.
Continue to press the soft key More or
Less until the desired distance for the
route segment to be blocked is set.
Press.
The system calculates a new route
avoiding the blocked segment.
This function offers the option of selecting
a stop-over destination while route guid-
ance is active.
A stop-over destination can be, for exam-
ple, a gas station, a rest area, or a hospital,
etc. Once the stop-over destination has
been reached, the system automatically
calculates the route to the final destina-
tion.Entering an stop-over destination
The soft key displays are shown
(page 121).
Press the St-over soft key.
The full-screen map display appears.Selectable soft keys:
soft key:
A list of Mercedes-Benz Centers in the
area appears.
soft key:
A list of gas stations in the area ap-
pears.
soft key:
A list of parking areas and multi-story car
parks in the area appears.
soft key:
A list of restaurants in the area ap-
pears.
soft key:
A list of hospitals in the area appears.
Other soft key:
The Enter Destination menu appears
when pressing this soft key. Any desti-
nation city can now be entered. Please
see “Entering a city” section for the re-
maining steps (
page 105).
Stop-over
iRoute guidance to a stop-over is al-
ready active if the color of the St-over
softkey changes.
To change or delete the stop-over des-
tination, see (
page 126).
Page 127 of 168
126 Navigation*During route guidance
Press one of the soft keys, for example
the soft key.
One of several food categories can be
chosen (if available).
If appropriate destinations are avail-
able, a list with restaurants in the area
appears.
Use or to select a destination
from the list.
Press the Details soft key, if neces-
sary.
Details of this destination appear.
Press after the selection of a desti-
nation.
The system begins to calculate the
route to the selected stop-over destina-
tion.
Changing/deleting stop-over destina-
tions
The soft key displays are shown
(page 121)
.
iThe arrows point in the direction of the
destination.
Distance information specifies the di-
rect distance to the destination.
iA stop-over destination can be
changed or deleted only while the route
guidance to this stop-over is active (in-
dicated by St-over soft key with no
color).
The full-screen map display is shown
instead of the menu if no stop-over has
been entered. The stop-over destina-
tion can now be entered (
page 125)
Page 128 of 168
127 Navigation*
During route guidance
Press the St-over soft key.
The menu for deleting or changing the
stop-over destination appears.
Use to select the
Delete active stopover entry.
Press .
This will delete the stop-over. The sys-
tem calculates the route to the final
destination,
or
Use to select the
Replace active stopover entry.
Press .
The stop-over is deleted, a new stop-
over destination can be entered
(page 125).
The system can store the current vehicle
location as a destination in the Last
destinations destination memory
(
page 132).
The soft key displays are shown
(page 121).
Press the Memory soft key.
The current position is stored. The
Memory soft key display will change its
color for a short period of time.
The soft key displays are shown
(page 121).
Press the Display soft key.
The Display menu appears.
Storing the current location
iSuch destinations are marked in the
Last destinations memory with
(page 132).
If you wish to store a destination for lat-
er retrieval or repeat usage, you can
save the current destination in the des-
tination memory (
page 133).
Defining route guidance displays
Page 129 of 168
128 Navigation*During route guidanceSelectable soft keys:
Symbols soft key:
Allows access to setting the symbols
display (
page 128).
View soft key:
Allows access to setting the map orien-
tation (
page 129).
GPS soft key:
Allows access to the Position Display
menu (
page 130).
Auto soft key:
Allows access to the Automatic Map
Switching menu (
page 130).
Zoom soft key:
Allows access to the definition of the
scales for full-screen and split-screen
map display (
page 131).
You can select which POIs will appear as
symbols on the map.
In the Display menu (
page 127)
press the Symbols soft key.
The available options appear.
Use or to select an option.
Press.
The selected option is activated. A solid
circle designates an activated op-
tion.
Standard option:
The symbols for the system default
setting are displayed on the map.
Personal option:
The symbols to be displayed can be
selected and set (
page 129).
Setting symbol displays iThe symbols are on display only if the
map scale is set at 0.05 mi (50 m),
0.1 mi (100 m), 0.2 mi (200 m), or
0.5 mi (500 m).
To set the map scale (
page 119).
