2004 MERCEDES-BENZ C320 Owner's Manual

Page 225 of 400

MERCEDES-BENZ C320 2004 W203 Owners Manual 225 Controls in detail
Useful features
EMERGENCY CALL – CALL CONNECTED
 
appears in the multifunction display. All in-
formation relevant to the emergency, such 
as the location of the vehicle (dete

Page 226 of 400

MERCEDES-BENZ C320 2004 W203 Owners Manual 226 Controls in detailUseful featuresInitiating an emergency call manually
1Cover
2SOS button
Briefly press on cover1.
The cover will open.

Press SOS button2 briefly.
The indicator lamp in SOS butt

Page 227 of 400

MERCEDES-BENZ C320 2004 W203 Owners Manual 227 Controls in detail
Useful features
system mutes and the message 
TELE AID 
– ROADSIDE ASSISTANCE CALL ACTIVE
 
appears in the multifunction display.

Describe the nature of the need for 
assist

Page 228 of 400

MERCEDES-BENZ C320 2004 W203 Owners Manual 228 Controls in detailUseful featuresA voice connection between the Customer 
Assistance Center representative and the 
occupants of the vehicle will be estab-
lished. When a voice connection is estab

Page 229 of 400

MERCEDES-BENZ C320 2004 W203 Owners Manual 229 Controls in detail
Useful features
Upgrade signals
The Tele Aid system processes calls using 
the following priority:
Automatic emergency – First priority

Manual emergency – Second priority

Page 230 of 400

MERCEDES-BENZ C320 2004 W203 Owners Manual 230 Controls in detailUseful featuresRemote door unlock
In case you have locked your vehicle unin-
tentionally (e.g. SmartKey inside vehicle), 
and the reserve SmartKey is not handy:
Contact the Merc

Page 231 of 400

MERCEDES-BENZ C320 2004 W203 Owners Manual 231 Controls in detail
Useful features
Garage door opener
The built-in remote control is capable of 
operating up to three separately controlled 
devices, for example garage door openers, 
gate opener

Page 232 of 400

MERCEDES-BENZ C320 2004 W203 Owners Manual 232 Controls in detailUseful features
Programming or reprogramming the 
integrated remote control
Step 1:
Switch on ignition.
Step 2:

If you have previously programmed an 
integrated signal transmi