2003 LEXUS LS430 content

Fig. 36: Displaying Navigation Screen
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
4.Check the navigation and disc information when the "Parts Information" screen is displayed.
NAVIGATION MANUFACTURER CHART
HINT:
The microphone is checked in the "Navigation Check (Microphone Check)" mode.
Illustrations may differ from the actual vehicle depending on vehicle specifications.
1.Start the diagnostic mode (see DIAGNOSTIC START
-UP/FINISH )
DisplayContents
Navigation Manufacturer/*1Navigation ECU manufacturer name is displayed.
Navigation Version/*2Navigation ECU version is displayed.
Disc Manufacturer/*3Map disc manufacturer is displayed.
Disc Version/*4Map disc version is displayed.

Fig. 43: Displaying Mode Screen
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
Screen Description
DISPLAY CONTENTS CHART
d. LAN Monitor (Original) Screen
DisplayContents
Device name/*1Target Device
Segment/*2Target Device Logical address
DTC/*3DTC (Diagnostic Trouble Code)
Timestamp/*4The time and date of past DTCs displayed. (The year is displayed in 2 digit
format.)
Present
Code/*5The DTC output at the service check is displayed.
Past Code/*6Diagnostic memory results and recorded DTCs are displayed.

Fig. 46: Displaying LAN Monitor (Individual) Screen
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
Screen Description
DISPLAY CONTENTS CHART
2.DISPLAY CHECK
a. Vehicle Signal Check Mode Screen
DisplayContents
Device name/*1Target device
Segment/*2Target logical address
DTC/*3DTC (Diagnostic Trouble Code)
Sub-Code (device
address)/*4Physical address stored with DTC. (If there is no address, nothing is
displayed.)
Connection check No./*5Connection check number stored with DTC.
DTC occurrence/*6Number of times the same DTC has been recorded.

Fig. 47: Displaying Vehicle Signal Check Mode Screen
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
Screen Description
NAME CONTENTS
HINT:
Only items sending a vehicle signal will be displayed.
This screen is updated once per second when input signals to the vehicle are changed.
3.NAVIGATION CHECK
a. Navigation Check MENU Screen
NameContents
BatteryBattery voltage is displayed.
PKBParking brake ON/OFF state is displayed.
REVReverse signal ON/OFF state is displayed.
IGIG switch ON/OFF state is displayed.
ADIM/TCANBrightness state DIM (with)/ BRIGHT (without) is displayed.
SPEEDThe vehicle speed, displayed in km/h.
TAILTAIL signal (Head lamp dimmer switch) ON/OFF state is displayed.

Satellite information/*1
Information from a maximum of 12 satellites is displayed on the screen. This information includes
the target GPS satellite number, elevation angle, direction and signal level.
Receiving condition/*2
(DENSO model)
DISPLAY CHART
(AISIN AW Model)
DISPLAY CHART
Measurement information/*3
DISPLAY CHART
Position information/*4
DISPLAY CHART
Date information/*5
DISPLAY CHART
DisplayContents
TThe system is receiving a GPS signal, but is not using it for location.
PThe system is using the GPS signal for location.
-The system cannot receive a GPS signal.
DisplayContents
01HThe system cannot receive a GPS signal.
02HThe system is tracing a satellite.
03HThe system is receiving a GPS signal, but is not using it for location.
04HThe system is using the GPS signal for location.
DisplayContents
2D2-dimensional location method is being used.
3D3-dimensional location method is being used.
NGLocation data cannot be used.
ErrorReception error has occurred.
-Any other state.
DisplayContents
PositionLatitude and longitude information on the current position is displayed.
DisplayContents

c. Vehicle Signal Check Screen
Fig. 50: Vehicle Signal Check Screen

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
Vehicle signal
DISPLAY CHART
Sensor signal
DISPLAY CHART
HINT:
Signals are updated once per second only when vehicle sensor signals are changed.
DateThe date/time information obtained from GPS signal is displayed in Greenwich mean time
(GMT). The last 4 digits are displayed.
DisplayContents
REV/*1REV signal ON/OFF state is displayed.
SPD/*2SPD signal condition is displayed.
DisplayContents
Gyro
sensor/*3Gyro sensor output condition is displayed (when the vehicle runs straight or is
stationary, the voltage is approximately 2.5 V).

d. Parts Information Screen
Fig. 51: Displaying Parts Information Screen

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
Screen description
DISPLAY CHART
e. Memory Copy/Paste Screen
DisplayContents
Navigation Manufacturer/*1Navigation ECU manufacturer is displayed.
Navigation Version No./*2Navigation ECU version is displayed.
Disc ManufacturersMap disc manufacturer is displayed.
Disc Version No./*4Map disc version is displayed.