2003.5 Peugeot Boxer Dag Owner's Manual

YOUR BOXER IN DETAIL
90
If you select
"Route options" from
the main menu, by pressing the knob, you gain access to a new pagewhich enables you to define yourpreferences for calculation of theroute, with the following sub-menu:
 Route type
 Highway
 OK
"Route type" function This enables you to choose one of the main criteria for calculation of theroute. The options available are "Shortest
time" to favour motorways and main
roads and "Shortest distance" to
choose the shortest route.
To validate the option, select "OK".
Route options
"Highway" function This enables you to activate or deac- tivate the system's authorisation toinclude motorways when calculatingthe route.
To validate the option, select
"OK".
REAR VIEW ASSISTANCE When reversing, this system enables you to display the images from thevideo camera installed at the rear ofyour vehicle on the screen. Activation With the ignition key in the "On"
position, the system switches on when reverse gear is engaged. Itprovides you with the image usually
observed in an exterior mirror. All of the controls are disarmed, with the exception of:
Ð the "MAIN DARK" button (switch
the display on or to standby mode),
Ð button L(PEUGEOT customer con-
tact centre),
Ð the "SRC" button (selection of the
audio source),
Ð button O(pick up-hang up),
Ð knob H "SEL" (adjustment of the
display brightness),
Ð knob B(volume adjustment). Adjusting the brightness
To adjust the brightness of the dis-
play, turn knob
Hclockwise to
increase the brightness or anti-clockwise to reduce it.
In bad or wintry weather, ensure that the videocamera is not covered
with mud, frost or snow.
17-11-2003

YOUR BOXER IN DETAIL
90
If you select
"Route options" from
the main menu, by pressing the knob, you gain access to a new pagewhich enables you to define yourpreferences for calculation of theroute, with the following sub-menu:
 Route type
 Highway
 OK
"Route type" function This enables you to choose one of the main criteria for calculation of theroute. The options available are "Shortest
time" to favour motorways and main
roads and "Shortest distance" to
choose the shortest route.
To validate the option, select "OK".
Route options
"Highway" function This enables you to activate or deac- tivate the system's authorisation toinclude motorways when calculatingthe route.
To validate the option, select
"OK".
REAR VIEW ASSISTANCE When reversing, this system enables you to display the images from thevideo camera installed at the rear ofyour vehicle on the screen. Activation With the ignition key in the "On"
position, the system switches on when reverse gear is engaged. Itprovides you with the image usually
observed in an exterior mirror. All of the controls are disarmed, with the exception of:
Ð the "MAIN DARK" button (switch
the display on or to standby mode),
Ð button L(PEUGEOT customer con-
tact centre),
Ð the "SRC" button (selection of the
audio source),
Ð button O(pick up-hang up),
Ð knob H "SEL" (adjustment of the
display brightness),
Ð knob B(volume adjustment). Adjusting the brightness
To adjust the brightness of the dis-
play, turn knob
Hclockwise to
increase the brightness or anti-clockwise to reduce it.
In bad or wintry weather, ensure that the videocamera is not covered
with mud, frost or snow.
17-11-2003

YOUR BOXER IN DETAIL91
VENTILATION 1. Windscreen de-icing or demisting vents.
2. Side vents.
3. Centre vents.
4. Air outlet to front footwells. Advice on operation 
Place the air flow control at a level sufficient to ensure a good renewal of air in the passenger compartment.
 For perfectly even air distribution, take care not to obs-truct the exterior air intake grilles and the vents. Checkthat the passenger compartment filter is in good condi-tion.
17-11-2003

YOUR BOXER IN DETAIL
92
HEATING AIR CONDITIONING
1. Air intake
"Recirculated inside air" position.
This permits recirculation of the airinside the vehicle. Recirculation permits isolation of the passenger compartment from exter-nal odours and smoke. Used simultaneously with the air conditioning, recirculation permitsimprovement of the air conditioningperformance at cold settings. When the recirculation is used in ahumid climate, there is a risk of mis-ting of the windows.
"Outside air intake" position.
As soon as possible, place control 1
in this position to avoid possible mis-ting of the windows and deterioration
of the air quality. 2. Air flow adjustment
Turn the control from theOFF position to the MAX
position to obtain an air flow
sufficient to ensure your
comfort.
3. Temperature adjustment
To be adjusted to your requirements.
17-11-2003

YOUR BOXER IN DETAIL93
4. Air distribution adjustment
Windscreen and side win- dows (demisting-de-icing).
To quickly de-ice or demist the wind-screen and side windows: Ð set the temperature and air flow controls to maximum,
Ð close the centre vents,
Ð place the exterior air intake control 1 in the "Outside air intake" posi-
tion,
Ð switch on the air conditioning by pressing button 6.
Windscreen, side windows and footwells. Footwells. Footwells and central vents. Centre and side vents. Demisting the rear hinged door windows and the mirrors With the engine running, pressing the button once demists the rear hin-ged door windows and the mirrors.
This switches off automatically after a few minutes. It is possible to stop demisting by pressing the button. Pressing the button again resumes demisting. Important precaution Operate the air conditioning system for 5 to 10 minutes, once or twice amonth, to keep it in perfect working
order. If the system does not produce cold
air, do not use it and contact a
PEUGEOT dealer. Note:
to optimise the operation of
the air conditioning, leave the vents open. 5. Additional heating system rear air blower control
This is linked with the air flow adjustment 2.
6. Air conditioning control The air conditioning is designed to
operate in all seasons. In summer, itenables the temperature to be lowe-
red and in winter, above 0 ¡C, it
increases the effectiveness of thedemisting. Press the switch, the indi-cator light comes on.
The air conditioning does notoperate while the air flow adjust-ment control is in the minimumposition. Note: it is quite normal that the
condensation created by the air conditioning results in a flow ofwater under the vehicle when it is
stationary.
17-11-2003

YOUR BOXER IN DETAIL
94
PROGRAMMABLE HEATING
(Webasto)* The programmable heating is provi-
ded to operate with the engine off. Itpermits heating of the passengercompartment, de-icing of the win-dows and pre-heating of the coolantcircuit to provide an optimum opera-ting temperature when the engine isswitched on.
* According to destination. Control panel/digital programmer The programmable heating system's control panel is located to the left ofthe instrument panel. 1.
Heating cycle indicator light.
2. Screen lighting.
3. Display of the number of the selected programme.
4. Time display button.
5. Time setting buttons.
6. Selection of the stored program-me.
7. Heating immediate start-up but-ton.
8. Time setting and display indicatorlight.
TIME DISPLAY Press button 4.
The time display indicator light 8
comes on and the time is displayed for approximately ten seconds. SETTING THE CLOCK Press button 4. The screen and the
setting indicator light 8come on.
Within ten seconds, press one of the buttons 5until the correct time is dis-
played:
Ð press button ">"to move the clock
on,
Ð press button "<"to move the clock
back.
Note: continuous pressing of buttons
">" or "<" scrolls through the digits
more quickly.
17-11-2003

17-11-2003
YOUR BOXER IN DETAIL95
IMMEDIATE OPERATION Before switching on the programmable heating, on the vehicle's heating/ventilation control panel, check that:
Ð the temperature adjustment control is in the "Hot air" position,
Ð the air flow adjustment control is in position
2. Press button
7.
The screen and the heating cycle indicator light 1come on and
remain on throughout the period ofoperation.
To switch the heating off, press button 7.
The screen and the heating cycleindicator light 1switch off.

17-11-2003
YOUR BOXER IN DETAIL
96
PROGRAMMED OPERATION Note:
before setting the program-
mable heating, ensure that the clock
is set correctly. Operation of the heating can be pro- grammed between one minute and24 hours in advance. Note: you can store three different
start-up time settings and program- me one deferred start-up. Note: if you wish to switch on the
heating at a set time every day, you must reprogramme the stored time
each day.
Press button 6. The screen comes
on. The segments "A"or the previous
stored time and the preselection number "B"are displayed for ten
seconds. Note: to display the other preselec-
ted times, press button 6several
times within ten seconds until the required preselection number "B"
appears.
To set the start-up time, press one of the buttons 5within ten seconds. The programming is stored when:
Ð the start-up time and the preselec-
tion number "B" disappear,
Ð the screen lighting switches off.