Page 25 of 181

17-11-2003
1 -Coolant temperature gauge.
2 - Coolant temperature warning light.
3 - Speedometer.
4 - Left-hand direction indicator.
5 - Side lights and dipped beamheadlamps indicator light.
6 - Main beam headlamps indicatorlight.
7 - Right-hand direction indicator. 8 -
Rev counter.
9 - Low fuel level warning light.
10 - Fuel gauge.
11 - Brake fluid level warning light.
12 - Traction control (ASR) warninglight.
13 - Passenger air bag disarmedwarning light.
14 - Trip distance recorder displaycontrol and zero reset button. 15 -
Front air bags warning light.
16 - Anti-lock braking system (ABS) warning light.
17 - Automatic gearbox temperatureor fault warning light.
18 - Low coolant level warning light.
19 - Service indicator, oil levelgauge, automatic gearbox
display, clock and total distance
recorder.
20 - Diesel engine pre-heatingwarning light.
21 - Engine oil pressure warninglight.
22 - Battery charge warning light.
23 - Clock setting button.
24 - Engine diagnostics warninglight.
25 - Front brake pad wear warninglight.
26 - Handbrake warning light.
27 - Water in diesel filter warninglight.
28 - Electronic immobiliser keywarning light.
INSTRUMENTS AND CONTROLS
28
PETROL-DIESEL MANUAL AND AUTOMATIC GEARBOX
INSTRUMENT PANELS
Page 26 of 181

Low coolant level warning light Illumination of this warning light indicates that the coolant level is too
low.
Stop immediately.
Warning: allow the engine to cool before topping up.
The cooling circuit is pressurised.
To avoid any risk of scalding, unscrew the cap by two turns to allow the pressure
to drop. When the pressure has dropped, remove the cap and top up the level.
Contact a PEUGEOT dealer.
INSTRUMENTS AND CONTROLS 29
Engine oil pressure warning light This comes on for a few seconds when the ignition is switched on. Illumination of this warning light while the engine is running indicates
that the oil pressure or level is too low.
Stop immediately. If there is a lack of oil in the lubrication circuit, top it up.
Contact a PEUGEOT dealer as soon as possible.
INSTRUMENTS AND CONTROLS
A permanently lit warning light or one that flashes while the engine is running indicates an operating fault. The illumination of certain warninglights may be accompanied by a bleep and a message on the multi-
function display. Do not ignore this warning: contact your PEUGEOT dealer as soon as possible.
Handbrake warning light This comes on for a few seconds when the ignition is
switched on.Illumination of this warning light indi-cates that the handbrake is applied
or has not been released correctly.Coolant temperature warning light This comes on for a few seconds when the ignition is
switched on.Illumination of this warning light indi-cates an abnormal increase in thecoolant temperature.
Stop immediately.
Contact a PEUGEOT dealer.
17-11-2003
Page 27 of 181

17-11-2003
Anti-lock braking system (ABS) warning light If the warning light remains on or comes on above 7 mph (12 km/h), this
indicates an ABS system fault. Nevertheless, the vehicle retains conventional assisted braking.
Contact a PEUGEOT dealer.
Traction control (ASR) warning lightIf the warning light remains on or comes on while the engine is running
and the vehicle is moving, contact a PEUGEOT dealer.It flashes when the system comes into operation and comes on perma-
nently when the system is disarmed.
Diesel engine pre-heating warning light This comes on when the ignition is switched on.
Wait until it goes out before operating the starter.
Engine autodiagnostics warning light This comes on when the ignition is switched on. If it comes on while the engine is running, it indicates:
Ð an emission control system fault,or
Ð a particulate emission filter fault. If it flashes while the engine is running, this indicates an injection or ignition sys-
tem fault. There is a risk of destruction of the catalytic converter (petrol engineonly).
Contact a PEUGEOT dealer as soon as possible.
INSTRUMENTS AND CONTROLS
30
Battery charge warning light This comes on when the ignition is switched on.
If it comes on while the engine isrunning, it may indicate:
Ð faulty operation of the charging circuit,
Ð slack battery or starter terminals,
Ð a cut or slack alternator belt,
Ð an alternator failure.
Contact a PEUGEOT dealer.
Low brake fluid level warning light Illumination of this warning light while the engine is
running indicates that the handbrakeis applied or has not been released
correctly, or that the brake fluid level
is too low.
Simultaneous illumination of the ABS warning light and the low brake fluidlevel warning light indicates a brakeforce distribution system fault.
Stop immediately.
Contact a PEUGEOT dealer.
Page 28 of 181

17-11-2003
Water in diesel filter warning light This comes on for a few seconds when the ignition is switched on. Illumination of this warning light indicates that there is water in the diesel
filter.
There is a risk of damage to the injection system.
Contact a PEUGEOT dealer as soon as possible.
INSTRUMENTS AND CONTROLS 31
Passenger air bag disarmed warning light This comes on for a few seconds when the ignition is switched on. If the passenger air bag is disarmed, the warning light comes on when the ignition is switched on and stays on.
In all cases, if the warning light flashes, contact a PEUGEOT dealer.
Low fuel level warning light The warning light comes on for a few seconds when the ignition is switched on. Illumination of this warning light while the engine is running indicates
that the fuel level is low.
When the warning comes on, you have at least 8 litres of fuelleft.
Air bag warning light The warning light comes on for a few seconds when the ignition is switched on.Illumination of this warning light while the engine is running indicates:
Ð a front air bag fault, orÐ a side air bag fault.
Contact a PEUGEOT dealer.
Front brake pad wear warning light Lighting of this warning light
while the engine is running and the vehicle is moving and when youpress the brake pedal indicatesextreme wear of the front brakepads.
Contact a PEUGEOT dealer as soon as possible.
Electronic immobiliser keywarning light This comes on for a few
seconds when the ignition is switched on. Flashing of this warning light, after the ignition has been switched on,
indicates an operating anomaly. If this warning light comes on (per- manently) after the ignition isswitched on, check the identification
of the key.
Contact a PEUGEOT dealer as soon as possible.
Page 29 of 181
17-11-2003
INSTRUMENTS AND CONTROLS
32
Automatic gearbox temperature or fault warning light This comes on for a few seconds when the ignition is switched on. Illumination or flashing of this warning light while the engine is running
and the vehicle is moving indicates an automatic gearbox fault or an excessive automatic gearbox temperature.
Stop immediately.Allow the engine to run at idle (lever in position Nor P) until the warning light
switches off.
Contact a PEUGEOT dealer as soon as possible.
Coolant temperature gauge When the needle is in zone A, the
temperature is correct. When the needle is in zone B, the
temperature is too high.
Stop immediately.
Warning: allow the engine to cool
before topping up.The cooling circuit is pressurised.
To avoid any risk of scalding, unscrew the cap by two turns toallow the pressure to drop. When the pressure has dropped, remove the cap and top up the level.
Contact a PEUGEOT dealer.
Page 30 of 181
17-11-2003
INSTRUMENTS AND CONTROLS
32
Automatic gearbox temperature or fault warning light This comes on for a few seconds when the ignition is switched on. Illumination or flashing of this warning light while the engine is running
and the vehicle is moving indicates an automatic gearbox fault or an excessive automatic gearbox temperature.
Stop immediately.Allow the engine to run at idle (lever in position Nor P) until the warning light
switches off.
Contact a PEUGEOT dealer as soon as possible.
Coolant temperature gauge When the needle is in zone A, the
temperature is correct. When the needle is in zone B, the
temperature is too high.
Stop immediately.
Warning: allow the engine to cool
before topping up.The cooling circuit is pressurised.
To avoid any risk of scalding, unscrew the cap by two turns toallow the pressure to drop. When the pressure has dropped, remove the cap and top up the level.
Contact a PEUGEOT dealer.
Page 31 of 181

17-11-2003
Minimum Check the level with the dipstick and top it up. The figure shown is only correct if the vehicle has been on levelground, with the engine stopped, for10 minutes. Minimum oil level gauge fault Flashing of the segments indicates a fault in the oil level gauge or a lack of oil. There is a risk the engine will be damaged.
Contact a PEUGEOT dealer. Maximum oil level gauge fault Flashing of the squares indicates a fault in the oil level gauge or a surplus of oil. There is a risk the engine will be damaged.
Contact a PEUGEOT dealer.
INSTRUMENTS AND CONTROLS33
Instrument panel display After switching on the ignition, three functions are shown in succession:
Ð service indicator (see correspon-
ding section),
Ð engine oil level indicator,
Ð total distance recorder (total and trip distances).
Engine oil level indicator When the ignition is switched on, the engine oil level is indicated for a fewseconds, after the servicing infor-mation. Maximum Check the level using the dipstick to confirm whether the display is correct;a surplus of oil can cause damage tothe engine.
Contact a PEUGEOT dealer without
delay. Trip recorder zero reset With the ignition on, press the button.Excessive oil level Check the level using the dipstick to confirm whether the display is cor-rect, a surplus of oil can cause dam-age to the engine.
Contact a PEUGEOT dealer without
delay.
Page 32 of 181
17-11-2003
RADIO CASSETTE
YOUR BOXER IN DETAIL
34
Stalk movement
Function
1- Press Increase volume.
2- Press Decrease volume.
3- Press Sound cut-off (MUTE); restoring of the sound or by pressing button 1 or 2.
4- Press Change of source (radio/cassette).
5- Press Automatic search of lower frequencies (radio) - Rewind (cassette).
6- Press Automatic search of higher frequencies (radio) - Fast forward (cassette).
Button Function
A VOL Ð Decrease volume.
BO NCut-off/Restoration of the sound (MUTE). Press for more than 2 seconds: audio equipment on/off.
C VOL + Increase volume.