2001 TOYOTA SEQUOIA fog light

B02389
B02390
HEAT METHOD: When the problem seems to occur when the suspect area is heated. 2
NOTICE:3 WATER SPRINKLING METHOD:
(1)
(2)
4 OTHER: When a malfunction seems to occur when electrical load is excessive.When the malfunction seems to occur on a rainy day or in a
high±humidity condition. Heat the component that is the likely cause of the malfunction
with a hair dryer or similar object. Check to see if the malfunction
occurs.
Sprinkle water onto the vehicle and check to see if the malfunc-
tion occurs.
Turn on all electrical loads including the heater blower, head
lights, rear window defogger, etc. and check to see if the mal-
function occurs.ON HINT:
If a vehicle is subject to water leakage, the leaked water may
contaminate the ECU. When testing a vehicle with a water leak-
age problem, special caution must be taken.
Malfunc-
tion
Do not heat to more than 60 °C (140 °F). (Temperature
is limited not to damage the components.)
Do not apply heat directly to parts in the ECU. (1)
(2)
Never sprinkle water directly into the engine compart-
ment, but indirectly change the temperature and hu-
midity by applying water spray onto the radiator front
surface.
Never apply water directly onto the electronic compo-
nents. NOTICE: IN±30
± INTRODUCTIONHOW TO TROUBLESHOOT ECU CONTROLLED
SYSTEMS
30 Author: Date:
2005 SEQUOIA (RM1146U)

PP0O2±06
± PREPARATIONBODY ELECTRICAL
PP±73
131 Author: Date:
2005 SEQUOIA (RM1146U)
EQUIPMENT
Voltmeter
Ammeter
Ohmmeter
Test lead
ThermometerEngine coolant temperature sender gauge, Engine oil level warn-
ing switch, Seat heater
SyphonBrake fluid level warning switch
Oil bathEngine oil level warning switch
Bulb (1.4 W)Defogger switch
Bulb (3.4 W)Fuel sender gauge, Engine coolant temperature receiver gauge,
Seat belt warning relay
Dry cell batteryFuel sender gauge, Power mirror
Heat lightSeat heater
Hexagon wrench (6 mm)Power seat
Torque wrench
Masking tapeRear window defogger wire
Tin foilRear window defogger wire

± DIAGNOSTICSENGINE
DI±53
247 Author: Date:
2005 SEQUOIA (RM1146U)A/C SIG
A/C signal: ON or OFFON: A/C ON'
ELECT LOAD SIGElectrical load signal:
ON or OFFON: Headlights or defogger is
turned ON'
STOP LIGHT SWStop lamp switch:
ON or OFFON: brake pedal is depressed.'
+BM
Whether or not electric throttle
control system power inputted:
ON or OFF
ON: Idling'
+BM VOLTAGE+BM voltage:
Min.: 0, Max.: 19.9210 to 15 V: IdlingETCS service data
BATTERY VOLTAGEBattery voltage:
Min.: 0 V, Max.: 65.535 V9 to 14 V: Idling'
ACTUATOR POWERActuator power supply:
ON or OFFON: IdlingETCS service data
ATM PRESSUREAtmospheric pressure:
Min.: 0 kPa, Max.: 150 kPaEquivalent to atmospheric pres-
sure (absolute pressure)'
SECOND AIR VSVSecondary air injection system
statusON: Secondary air injection sys-
tem operation'
ACT VSVA/C cut status for Active Test:
ON or OFF'Active Test support data
EVAP (Purge) VSVVSV status for EVAP control:
ON or OFF'Active Test support data
FUEL PUMP / SPDFuel pump/speed status:
ON or OFF'Active Test support data
VVT CTRL B1VVT control status:
ON or OFF'Active Test support data
VVT CTRL B2VVT control status:
ON or OFF'Active Test support data
VACUUM PUMP
Key±off EVAP system pump sta-
tus:
ON or OFF
'Active Test support data
EVAP VENT VAL
Key±off EVAP system vent valve
status:
ON or OFF
'Active Test support data
TC/TE1TC and TE1 terminal of DLC3:
ON or OFF''
VVTL AIM ANGL #1VVT aim angle (bank 1):
Min.: 0 %, Max.: 100 %0 %: IdlingVVT duty signal value during intru-
sive operation
VVTL AIM ANGL #2VVT aim angle (bank 1):
Min.: 0 %, Max.: 100 %0 %: IdlingVVT duty signal value during intru-
sive operation
VVT CHNG ANGL #1VVT change angle:
Min.: 0FR, Max.: 60FR0 to 5 FR: IdlingDisplacement angle during intru-
sive operation
VVT CHNG ANGL #2VVT change angle:
Min.: 0FR, Max.: 60FR0 to 5 FR: IdlingDisplacement angle during intru-
sive operation
VVT OCV DUTY B1VVT OCV operation duty:
Min.: 0 %, Max.: 100 %0 %: IdlingRequested duty value for intrusive
operation
VVT OCV DUTY B2VVT OCV operation duty:
Min.: 0 %, Max.: 100 %0 %: IdlingRequested duty value for intrusive
operation
FC IDLFuel cut idle:
ON or OFFON: Fuel cut operation
FC IDL = ºONº when throttle valve
fully closed and engine speed over
2,800 rpm

DI±1484
± DIAGNOSTICSSUPPLEMENTAL RESTRAINT SYSTEM
1678 Author: Date:
2005 SEQUOIA (RM1146U)
4 Check SRS warning light.
PREPARATION:
(a) Connect the connectors to the airbag sensor assembly.
(b) Connect the connectors to the steering wheel pad.
(c) Connect the connectors to the front passenger airbag assembly.
(d) w/ Side and curtain shield airbag:
Connect the connectors to the side airbag assembly LH and RH.
(e) w/ Side and curtain shield airbag:
Connect the connectors to the curtain shield airbag assembly LH and RH.
(f) Connect the connectors to the front seat outer belt LH and RH.
(g) Connect the negative (±) terminal cable to the battery, and wait for at least 2 seconds.
CHECK:
(a) Turn the ignition switch to the ON position, and wait for at least 6 seconds.
(b) Operate all components of the electrical system (defogger, wiper, headlight, heater blower, etc.) and
check the SRS warning light operation.
OK:
The SRS warning light does not come on.
NG Replace airbag sensor assembly
(see page RS±82).
OK
END

I28588
BEANBODY ECU
Hi Beam Indicator
Driver Door ECU
A/C ECU
Sliding Roof
Control ECUMPX1
MPX2
MPX3HIND
HRLY
H±ON
DIM
HEAD
TAIL
A
HF
HI
FOGCombination Meter
From
Battery
HEAD
MAIN
Headlight
DRL (*1)
Headlight
DRL No. 4H±LP(*2) DRLH±LP(*2)
Headlight
Headlight H±LP(*1)
H±LP(*1)
H±LP(*1)
H±LP(*1) DIMMER
(*2)
(*2) Combination Switch
Light Control
Switch
Dimmer
Switch
Fog Light
SwitchDRL
Resister
*1: w/ DRL
*2: w/o DRL DI±1680
± DIAGNOSTICSBODY CONTROL SYSTEM
1874 Author: Date:
2005 SEQUOIA (RM1146U)

DI1OE±19
Inspector 's name:
Customer 's Name
Date VehicleVIN
Licence Plate No.
Production Data
Odometer Reading / /km
mile
Weather Conditions
When Problem
Occurred
Date Problem First Occurred
Frequency Problem Occurs
Weather
/ /
Once only Brought in
Malfunction
System
Outdoor Temperature
Fine Cloudy Rainy Snowy
Various/Others
Hot Warm Cool
Cold (Approx. °F ( °C))
Constant Sometimes ( times per day, month)
Key Unlock Warning System
Headlight and Taillight System (Light Auto Turn±off system, Daytime Running
Light System
Stop Light System
Automatic Light Control System
Illuminated Entry System
Foglight System
Wiper and Washer System
Power Window Control System
Power Door Lock Control System
Theft Deterrent System
Wireless Door Lock Control System
Others (Buzzer etc.)
Auto Lock/Unlock System BODY CONTROL SYSTEM Check Sheet
Remote Control Mirror System (w/ Driving Position Memory)
± DIAGNOSTICSBODY CONTROL SYSTEM
DI±1683
1877 Author: Date:
2005 SEQUOIA (RM1146U)
CUSTOMER PROBLEM ANALYSIS CHECK

± DIAGNOSTICSBODY CONTROL SYSTEM
DI±1687
1881 Author: Date:
2005 SEQUOIA (RM1146U)
WIRELESS DOOR LOCK CONTROL
SymptomSuspected AreaSee page
All functions of wireless door lock control system do not operate.
1. Transmitter
2. Wireless door lock receiver circuit
3. Key unlock warning switch circuit
4. Body ECUBE±99
DI±1737
DI±1715
IN±35
Lock (or unlock) function does not operate.
1. Door unlock detection switch circuit (Driver's)
(Passenger's)
(Rear Door)
(Back Door)
2. Any door ECU
3. Body ECUDI±1791
DI±1829
DI±1723
DI±1869
IN±35
IN±35
Automatic lock function operates even if any door is opened within
30 seconds after all doors are unlocked by wireless door lock
control system.1. Door courtesy light switch circuit
2. Any door ECU
3. Body ECUDI±1728
IN±35
IN±35
Wireless door lock function operates, but the buzzer does not
sound.1. Wireless door lock buzzer circuit
2. Body ECUDI±1741
IN±35
Buzzer sounds, but wireless door lock function does not operate.Body ECUIN±35
REAR WIPER AND WASHER
SymptomSuspected AreaSee page
Rear wiper does not operate.1. Rear wiper switch and motor circuit
2. Body ECUDI±1704
IN±35
Rear washer does not operate.1. Rear washer switch and motor circuit
2. Body ECUDI±1704
IN±35
LIGHT CONTROL
SymptomSuspected AreaSee page
Automatic light control does not operate.
1. Automatic light control sensor circuit
2. Light control switch circuit
3. Body ECUDI±1753
DI±1750
IN±35
Auto turn±off does not operate.
1. Door courtesy light switch circuit (Driver side)
2. Ignition switch
3. Driver door ECU
4. Body ECUDI±1728
BE±24
IN±35
IN±35
Daytime running light function does not operate.
1. Daytime running light relay circuit
2. Parking brake switch circuit
3. Body ECUDI±1712
DI±1744
IN±35
FOG LIGHT
SymptomSuspected AreaSee page
Fog lights do not come on.
1. Bulb
2. FOG fuse
3. Fog light relay and switch circuit
4. Body ECU±
BE±14
DI±1710
IN±35
OTHERS
SymptomSuspected AreaSee page
Illuminated entry function does not operate.1. Illumination circuit
2. Body ECUDI±1759
IN±35
All functions of the body control system do not operate.1. Power source circuit
2. Body ECUDI±1700
IN±35
Remote control mirror does not operate.
(w/ Driving position memory)1. Remote control mirror switch circuit
2. Driving position memory switch circuit
3. Body ECUDI±1767
DI±1772
IN±35

± DIAGNOSTICSBODY CONTROL SYSTEM
DI±1691
1885 Author: Date:
2005 SEQUOIA (RM1146U) TAIL ± GND1
(B6±7 ± B6±6)
G ± W±BLight control switch
(TAIL)Light control switch OFF10 to 14 V
CLTS (*3) ± GND1
(B6±12 ± B6±6)Y ± W±BAutomatic light control
sensor (Signal)Ignition switch OFFBelow 1 V
CLTS (*3) ± GND1
(B6±12 ± B6±6)Y ± W±BAutomatic light control
sensor (Signal)Ignition switch ONSignal waveform
CLTE (*3) ± GND1
(B6±3 ± B6±6)BR ± W±BAutomatic light control
sensor (Ground)AlwaysBelow 1 V
CLTB (*3) ± GND1
(B6±4 ± B6±6)R±G ± W±BAutomatic light control
sensor (IG)Ignition switch OFFBelow 1 V
CLTB (*3) ± GND1
(B6±4 ± B6±6)R±G ± W±BAutomatic light control
sensor (IG)Ignition switch ON10 to 14 V
BZR ± GND1
(B7±15 ± B6±6)LG ± W±BWireless door lock
buzzer signalBuzzer does not soundBelow 1 V
BZR ± GND1
(B7±15 ± B6±6)LG ± W±BWireless door lock
buzzer signalBuzzer sounds10 to 14 V
RLD ± GND1
(B7±26 ± B6±6)L ± W±BPower window control
(Rear LH (DOWN))Ignition switch ONBelow 1 V
RLD ± GND1
(B7±26 ± B6±6)L ± W±BPower window control
(Rear LH (DOWN))Ignition switch ON,
Rear left power window DOWN
operation
10 to 14 V
RLU ± GND1
(B7±25 ± B6±6)G±R ± W±BPower window control
(Rear LH (UP))Ignition switch ONBelow 1 V
RLU ± GND1
(B7±25 ± B6±6)G±R ± W±BPower window control
(Rear LH (UP))Ignition switch ON,
Rear left power window UP op-
eration
10 to 14 V
RRD ± GND1
(B5±20 ± B6±6)L ± W±BPower window control
(Rear RH (DOWN))Ignition switch ONBelow 1 V
RRD ± GND1
(B5±20 ± B6±6)L ± W±BPower window control
(Rear RH (DOWN))Ignition switch ON,
Rear right power window DOWN
operation
10 to 14 V
RRU ± GND1
(B5±19 ± B6±6)G±Y ± W±BPower window control
(Rear RH (UP))Ignition switch ONBelow 1 V
RRU ± GND1
(B5±19 ± B6±6)G±Y ± W±BPower window control
(Rear RH (UP))Ignition switch ON,
Rear right power window UP op-
eration
10 to 14 V
HEAD ± GND1
(B6±9 ± B6±6)G±Y ± W±BLight control switch
(HEAD)Light control switch HEADBelow 1 V
HEAD ± GND1
(B6±9 ± B6±6)G±Y ± W±BLight control switch
(HEAD)Light control switch OFF or TAIL10 to 14 V
PKB ± GND1
(B5±3 ± B6±6)LG±R ± W±BParking brake switch
signalIgnition switch ON, Parking brake
appliedBelow 1 V
PKB ± GND1
(B5±3 ± B6±6)LG±R ± W±BParking brake switch
signalIgnition switch ON, Parking brake
not applied10 to 14 V
GSWGR RAirbag sensor commu-Airbag sensor communicationGSW
(B6±16)GR±RAirbag sensor commu
nication signal
Airbag sensor communication
circuit±
OBD2
(B5±2)G±RDiagnosis signalDLC3 communication circuit±
FFOG ± GND1
(B6±13 ± B6±6)G±B ± W±BFog light switch signalHeadlight dimmer switch LOW,
Fog light switch OFFBelow 1 V