2001 TOYOTA SEQUOIA airbag

DI6P2±15
DI±1132
± DIAGNOSTICSSUPPLEMENTAL RESTRAINT SYSTEM
1326 Author: Date:
2005 SEQUOIA (RM1146U)
PROBLEM SYMPTOMS TABLE
Proceed with troubleshooting of each circuit in the table below.
SymptomSuspected AreaSee page

The front passenger seat condition differs from the indication by
the passenger airbag ON/OFF indicator (DTC is not output).
Trouble in indication of Passenger airbag ON/OFF indica-
torDI±1485

With the ignition switch is in ON position, the SRS warning light
sometimes comes on after approximately 6 seconds.
SRS warning light circuit (Always comes on, when DTC is
not output)DI±1491

The SRS warning light always comes on even when DTC is not
output.
SRS warning light circuit (Always comes on, when DTC is
not output)DI±1491

With the ignition switch is in the ON position, the SRS warning
light does not come on.
SRS warning light circuit (Does not come on, when igni-
tion switch is turned to the ON position)DI±1496

Although an SRS warning light operates normally, DTC or a
normal system code is not display.
TC terminal circuitDI±1498

Although terminals TC and CG of DLC3 are not connected, DTC
or a normal system code is display.
TC terminal circuitDI±1498

DIDGL±01
H24009
A19A20A21
17
24 18
23 19
22 20
21 4 8372615
12 13 11 14 10
15 9
16
28 27 26 25 30 294 8372615 4 8372615
10 9 12 13 11 14 15 16 10 9 12 13 11 14 15 16
17 18 19 20 24 23 22 21 17 18 19 20 24 23 22 21
± DIAGNOSTICSSUPPLEMENTAL RESTRAINT SYSTEM
DI±1133
1327 Author: Date:
2005 SEQUOIA (RM1146U)
TERMINALS OF ECU
1. AIRBAG SENSOR ASSEMBLY
Terminal No.Terminal SymbolDestination
A19±1 (*1)SFL+Side airbag assembly LH (Side squib LH)
A19±2 (*1)SFL±Side airbag assembly LH (Side squib LH)
A19±3 (*1)ICL±Curtain shield airbag assembly LH (Curtain shield airbag LH
squib)
A19±4 (*1)ICL+Curtain shield airbag assembly LH (Curtain shield airbag LH
squib)
A19±5PL+Front seat outer belt LH (P/T squib LH)
A19±6PL±Front seat outer belt LH (P/T squib LH)
A19±9LSP+Seat position airbag sensor assembly
A19±10LBE+Front seat inner belt RH (Seat belt buckle switch LH)
A19±17LSP±Seat position airbag sensor assembly
A19±18LBE±Front seat inner belt RH (Seat belt buckle switch LH)
A19±19 (*1)VUPLSide airbag sensor assembly LH
A19±20 (*1)VUCLCurtain shield airbag sensor assembly LH
A19±21 (*1)ESLSide airbag sensor assembly LH
A19±22 (*1)ESCLCurtain shield airbag sensor assembly LH
A20±1P2+Front passenger airbag assembly (P squib (Dual stage ± 2nd
step))
A20±2P2±Front passenger airbag assembly (P squib (Dual stage ± 2nd
step))
A20±3P±Front passenger airbag assembly (P squib)
A20±4P+Front passenger airbag assembly (P squib)
A20±5D+Steering wheel pad (D squib)
A20±6D±Steering wheel pad (D squib)
A20±7D2±Steering wheel pad (D squib (Dual stage ± 2nd step))
A20±8D2+Steering wheel pad (D squib (Dual stage ± 2nd step))
A20±13PBEWIntegration control and panel (Seat belt warning light)
A20±14LACombination meter (SRS warning light)
A20±15TCDLC3

DI±1134
± DIAGNOSTICSSUPPLEMENTAL RESTRAINT SYSTEM
1328 Author: Date:
2005 SEQUOIA (RM1146U)A20±16
SILDLC3
A20±17P±ABIntegration control and panel (Passenger airbag ON/OFF indi-
cator)
A20±18GSWBody ECU
A20±19 (*1)RMSWRSCA cutoff switch
A20±20 (*1)RMILCombination meter (RSCA OFF indicator)
A20±21IG2IGN1 Fuse (Power source)
A20±22GSW2ECM
A20±23PAONIntegration control and panel (Passenger airbag ON/OFF indi-
cator)
A20±25E1Ground
A20±26E2Ground
A20±27±SRFront airbag sensor RH
A20±28±SLFront airbag sensor LH
A20±29+SRFront airbag sensor RH
A20±30+SLFront airbag sensor LH
A21±3PR±Front seat outer belt RH (P/T squib RH)
A21±4PR+Front seat outer belt RH (P/T squib RH)
A21±5 (*1)ICR+Curtain shield airbag assembly RH (Curtain shield airbag RH
squib)
A21±6 (*1)ICR±Curtain shield airbag assembly RH (Curtain shield airbag RH
squib)
A21±7 (*1)SFR±Side airbag assembly RH (Side squib RH)
A21±8 (*1)SFR+Side airbag assembly RH (Side squib RH)
A21±16FSR+Occupant classification ECU
A21±19 (*1)ESCRCurtain shield airbag sensor assembly RH
A21±20 (*1)ESRSide airbag sensor assembly RH
A21±21 (*1)VUCRCurtain shield airbag sensor assembly RH
A21±22 (*1)VUPRSide airbag sensor assembly RH
A21±24FSR±Occupant classification ECU
*1: w/ Side and curtain shield airbag

H22556
O6
O7
± DIAGNOSTICSSUPPLEMENTAL RESTRAINT SYSTEM
DI±1135
1329 Author: Date:
2005 SEQUOIA (RM1146U)
2. OCCUPANT CLASSIFICATION ECU
Terminal No. (Symbols)Wiring ColorTerminal DescriptionConditionSpecification
O6±1 (+B) ±
O6±3 (GND)W±R ± W±BBatteryIgnition switch ON10 to 14 V
O6±2 (DIA) ±
O6±3 (GND)G±R ± W±BDiagnosis (DLC3)Ignition switch ONPulse generation
O6±3 (GND) ±
Body groundW±B ± Body groundGroundAlwaysBelow 1 V
O6±4 (FSR±) ±
O6±3 (GND)B ± W±BAirbag sensor assy center
communication line (±)AlwaysBelow 1 V
O6±5 (BGND) ±
O6±3 (GND)L ± W±BPassenger side buckle
switch ground lineAlwaysBelow 1 V
O6±7 (IG) ± O6±3 (GND)B±O ± W±BPower source (IGN1 Fuse)Ignition switch ON10 to 14 V
O6±8 (FSR+) ±
O6±4 (FSR±)W ± BAirbag sensor assy center
communication lineIgnition switch ONPulse generation
O6±9 (BSW) ±
O6±5 (BGND)R ± LPassenger side buckle
switch lineAlwaysPulse generation
O7±1 (SGD1) ±
O6±3 (GND)O ± W±BOccupant classification
sensor front LH ground lineAlwaysBelow 1 V
O7±2 (SGD2) ±
O6±3 (GND)B±Y ± W±B
Occupant classification
sensor front RH ground
line
AlwaysBelow 1 V
O7±3 (SGD3) ±
O6±3 (GND)R±B ± W±BOccupant classification
sensor rear LH ground lineAlwaysBelow 1 V
O7±4 (SGD4) ±
O6±3 (GND)R±W ± W±BOccupant classification
sensor rear RH ground lineAlwaysBelow 1 V
O7±5 (SVC3) ±
O7±3 (SGD3)Y±B ± R±B
Occupant classification
sensor rear LH power sup-
ply lineIgnition switch ON, a load
is applied to occupant clas-
sification sensor rear LH
4.5 to 5.1 V
O7±6 (SVC4) ±
O7±4 (SGD4)Y ± R±W
Occupant classification
sensor rear RH power sup-
ply lineIgnition switch ON, a load
is applied to occupant clas-
sification sensor rear RH
4.5 to 5.1 V
O7±7 (SIG1) ±
O7±1 (SGD1)G ± OOccupant classification
sensor front LH signal lineIgnition switch ON, a load
is applied to occupant clas-
sification sensor front LH
0.2 to 4.9 V
O7±8 (SIG2) ±
O7±2 (SGD2)LG ± B±YOccupant classification
sensor front RH signal lineIgnition switch ON, a load
is applied to occupant clas-
sification sensor front RH
0.2 to 4.9 V
O7±9 (SIG3) ±
O7±3 (SGD3)G±B ± R±BOccupant classification
sensor rear LH signal lineIgnition switch ON, a load
is applied to occupant clas-
sification sensor rear LH
0.2 to 4.9 V
O7±10 (SIG4) ±
O7±4 (SGD4)L±W ± R±WOccupant classification
sensor rear RH signal lineIgnition switch ON, a load
is applied to occupant clas-
sification sensor rear RH
0.2 to 4.9 V

H23984
6 seconds
Ignition Switch
SRS Warning
Light (*1)
SRS Warning
Light (*2)
*1: SRS airbag system is normal
*2: SRS airbag system has trouble ON
OFF
ON
OFF
ON
OFF
± DIAGNOSTICSSUPPLEMENTAL RESTRAINT SYSTEM
DI±1139
1333 Author: Date:
2005 SEQUOIA (RM1146U)
3. FUNCTION OF SRS WARNING LIGHT
(a) Primary check.
Turn the ignition switch to the LOCK position. Wait for at least 2 seconds, then turn the ignition switch
to the ON position. The SRS warning light comes on for approximately 6 seconds and the SRS airbag
system diagnosis (including the seat belt pretensioner and occupant classification system) is per-
formed.
HINT:
If trouble is detected during the primary check, the SRS warning light remains on even after the primary
check period (for approximately 6 seconds) has elapsed.
(b) Constant check.
After the primary check, the airbag sensor assembly constantly monitors the SRS airbag system for
trouble.
HINT:
If trouble is detected during the constant check, the airbag sensor assembly functions as follows:

The SRS warning light comes on.

The SRS warning light goes off, and then comes on. This blinking pattern indicates the source voltage
drop. The SRS warning light goes off 10 seconds after the source voltage returns to normal.

DI±1140
± DIAGNOSTICSSUPPLEMENTAL RESTRAINT SYSTEM
1334 Author: Date:
2005 SEQUOIA (RM1146U)
(c) Review.
(1) When the SRS airbag system is normal:
The SRS warning light comes on only during the primary check period (for approximately 6 se-
conds after the ignition switch is turned to the ON position).
(2) When the SRS airbag system has trouble:

The SRS warning light remains on even after the primary check period has elapsed.

The SRS warning light goes off after the primary check, but comes on again during the
constant check.

The SRS warning light does not come on when turning the ignition switch from the LOCK
to ON position.
HINT:
The airbag sensor assembly keeps the SRS warning light on if the airbag has been deployed.
4. FUNCTION OF PASSENGER AIRBAG ON/OFF INDICATOR
The passenger airbag ON/OFF indicator function as follows:
(1) Turn the ignition switch to the ON position.
(2) The passenger airbag ON/OFF indicator (ºONº and ºOFFº) comes on for approximately 4 se-
conds, then goes off for approximately 2 seconds.
(3) Approximately 6 seconds after the ignition switch is turned to the ON position, the passenger
airbag ON/OFF indicator will be ON/OFF depending on the conditions listed below.
HINT:
If the front passenger seat condition and the indication by the passenger airbag ON/OFF indicator differ from
those shown in the table below, and the SRS warning light is off, then the DTC is not output. If this occurs,
perform troubleshooting of ºTrouble in indication of Passenger airbag ON/OFF indicatorº (see page
DI±1485).
ConditionºONº indicatorºOFFº indicator
VacantOFFOFF
Adult is seated.ONOFF
Child is seated.OFFON
Child restraint system (CRS) is set.OFFON
Occupant classification system failureOFFON

H22552
Ignition SwitchON
OFF
Passenger Airbag
ON/OFF Indicator
(ºONº)ON
OFF
ON
OFF4 sec.
ON/OFF condition depends on the
front passenger detection results. 2 sec.
4 sec. 2 sec.
Passenger Airbag
ON/OFF Indicator
(ºOFFº)
± DIAGNOSTICSSUPPLEMENTAL RESTRAINT SYSTEM
DI±1141
1335 Author: Date:
2005 SEQUOIA (RM1146U)
HINT:

The passenger airbag ON/OFF indicator comes on or goes off based on the timing chart below in order
to check the indicator light circuit.

When the occupant classification system has trouble, both the SRS warning light and the passenger
airbag ON/OFF indicator (ºOFFº) comes on. In this case, check the DTCs in the supplemental restraint
system first. Then troubleshoot the occupant classification system if DTC B1650/32 is indicated, and
troubleshoot the passenger airbag ON/OFF indicator if DTC B1660/43 is detected.

H24023
H24021
± DIAGNOSTICSSUPPLEMENTAL RESTRAINT SYSTEM
DI±1143
1337 Author: Date:
2005 SEQUOIA (RM1146U)
7. CHECK PASSENGER AIRBAG ON/OFF INDICATOR
(a) Turn the ignition switch to the ON position.
(b) Check that the passenger airbag ON/OFF indicator (ºONº
and ºOFFº) comes on for approximately 4 seconds, then
goes off for approximately 2 seconds.
HINT:
Refer to the table in step 4 regarding the passenger airbag ON/
OFF indicator when the ignition switch is turned to the ON posi-
tion and approximately 6 seconds pass.
8. CHECK RSCA OFF INDICATOR
(a) Check that the RSCA OFF indicator is off when turning
the ignition switch to the ON position.
(b) Check that the RSCA OFF indicator comes on when turn-
ing the RSCA OFF switch on (press the switch for approxi-
mately 2 seconds) with the ignition switch on.
(c) Turn the ignition switch to the LOCK position with the
RSCA OFF indicator is on, and then turn the ignition
switch to the ON position. Check that the RSCA OFF indi-
cator is off.
9. RELEASE METHOD OF ACTIVATION PREVENTION MECHANISM
The activation prevention mechanism is built into the connector for the squib circuit of the SRS.
As explained in the troubleshooting section, insert a piece of paper that is the same thickness as the male
terminal between the terminal and the short spring to release it (Refer to the illustrations on the next 3 pages).
CAUTION:
Never release the activation prevention mechanism on the squib connector even when inspecting
with the squib disconnected.
NOTICE:

Do not release the activation prevention mechanism unless specially directed by the trouble-
shooting procedure.

To prevent the terminal and the short spring from being damaged, always use a piece of paper
that is the same thickness as the male terminal.