2001 TOYOTA SEQUOIA airbag

PP43B±01
PP±68
± PREPARATIONSUPPLEMENTAL RESTRAINT SYSTEM
126 Author: Date:
2005 SEQUOIA (RM1146U)
SUPPLEMENTAL RESTRAINT SYSTEM
SST (Special Service Tools)
09082±00700SRS Airbag Deployment Tool
09082±00750Airbag Deployment Wire
Sub±harness No.3
09082±00780Airbag Deployment Wire
Sub±Harness No.6
09082±00802Airbag Deployment Wire
Sub±Harness No.8
(09082±10801)Wire A
(09082±20801)Wire B
(09082±30801)Wire C

PP0MS±23
PP±70
± PREPARATIONSUPPLEMENTAL RESTRAINT SYSTEM
128 Author: Date:
2005 SEQUOIA (RM1146U)
EQUIPMENT
Torque wrench
Bolt:
Length: 35 mm (1.387 in.)
Pitch: 1.0 mm (0.039 in.)
Diam.: 6.0 mm (0.236 in.)
Airbag disposal
Tire
Width: 185 mm (7.28 in.)
Inner diam.: 360mm (14.17 in.)
Airbag disposal
Tire with disc wheel
Width: 185 mm (7.28 in.)
Inner diam.: 360 mm (14.17 in.)
Airbag disposal
Plastic bagAirbag disposal

PP3JT±01
± PREPARATIONBODY
PP±75
133 Author: Date:
2005 SEQUOIA (RM1146U)
BODY
SST (Special Service Tools)
09082±00700SRS Airbag Deployment ToolSEAT BELT PRETENSIONER
09082±00740Airbag Deployment Wire
Sub±harness No.2SEAT BELT PRETENSIONER
09806±30010Windshield Moulding RemoverWINDSHIELD
ROOF DRIP SIDE FINISH
MOULDING
09812±00010Door Hinge Set Bolt WrenchFRONT DOOR

SS061±77
SS±46
± SERVICE SPECIFICATIONSSUPPLEMENTAL RESTRAINT SYSTEM
188 Author: Date:
2005 SEQUOIA (RM1146U)
SUPPLEMENTAL RESTRAINT SYSTEM
TORQUE SPECIFICATION
Part tightenedN´mkgf´cmft´lbf
Steering wheel set nut5051037
Steering wheel pad set screw (Torx screw)8.89078 in.´lbf
Front passenger airbag assembly x Instrument panel5.05144 in.´lbf
Front passenger airbag assembly x Instrument panel reinforcement2020415
Front seat x Body3737727
Front seat inner belt x Front seat4142831
Seatback cover x Seatback frame5.55649 in.´lbf
Armrest x Seatback frame3737727
Cutain shield airbag assembly x Body9.81007
Airbag senaor assembly x Body17.517913
Front airbag sensor x Body17.517913
Side airbag sensor assembly x Body17.517913
Curtain shield airbag sensor assembly x Body17.517913
Seat position sensor assembly x Body8.08271 in.´lbf

± SERVICE SPECIFICATIONSBODY
SS±49
191 Author: Date:
2005 SEQUOIA (RM1146U) Power window regulator x Door panel
5.55649 in.´lbf
Back door lock x Door panel8.08271 in.´lbf
FRONT WIPER AND WASHER±±±
Wiper link x Body5.55649 in.´lbf
Wiper motor x Wiper link5.55649 in.´lbf
Wiper arm x Wiper link2020415
REAR WIPER AND WASHER±±±
Rear wiper motor x Body5.55649 in.´lbf
Wiper arm x Rear wiper motor5.55649 in.´lbf
BODY OUTSIDE MOULDING±±±
Rear bumper cover x Rear bumper extension5.05043 in.´lbf
WINDSHIELD±±±
Inner rear view mirror set torx screw2.52522 in.´lbf
SLIDING ROOF±±±
Sliding roof housing x Body5.55649 in.´lbf
INSTRUMENT PANEL±±±
Front passenger airbag assembly x Instrument panel5.05144 in.´lbf
Front passenger airbag assembly x Instrument panel reinforcement2020415
Steering wheel x Steering wheel pad8.89078 in.´lbf
Box panel sub±assembly x Floor panel4040830
FRONT SEAT (Power Adjuster Type)±±±
w/ Side airbag:
Seatback cover bracket x Seat frame assembly5.55649 in.´lbf
Armrest x Seat frame assembly3738027
Front seat x Body3738027
FRONT SEAT (Manual Adjuster Type)±±±
w/ Side airbag:
Seatback cover bracket x Seat frame assembly5.55649 in.´lbf
Armrest x Seat frame assembly3738027
Front seat x Body3738027
REAR NO.1 SEAT (Separate Type)±±±
Rear seat cushion hinge x Body3738027
LH rear seat lock x Seat cushion frame4344032
Rear seat reclining adjuster x Seat cushion frame4344032
Rear seat reclining adjuster x Seatback frame4344032
RH rear seat lock x Seat cushion frame6465347
REAR NO. 1 SEAT (Split Type LH)±±±
Rear seat cushion hinge x Body4344032
Rear No. 1 seat outer adjuster x Seat cushion frame4344032
Rear No. 1 seat outer adjuster x Seatback frame4344032
Rear No. 1 seat inner adjuster x Seat cushion frame4344032
Rear No. 1 seat inner adjuster x Seatback frame4243031
Rear seat shoulder belt guide x Seatback frame3738027
REAR NO.1 SEAT (Split Type RH)±±±
Rear seat cushion hinge x Body3738027
Rear seat lock x Seat cushion frame4344032

F19795
A20
Airbag Sensor
AssemblySub J/B No.4Tire Pressure
Monitor ECU
T5 Translate ECU
D6
DLC3TC
E4P±B P±B
TC
P±B
13
TC
TCP±B
GT17
4D5
1A94A5
4C
5 4E5 ECM
23
4B
5
CG4
J43
J/CO
15
1F
O 15A
IGA12
TC
Instrument Panel J/BP±B DI±888
± DIAGNOSTICSTIRE PRESSURE WARNING SYSTEM
1082 Author: Date:
2005 SEQUOIA (RM1146U)
Tc and CG Terminal Circuit
CIRCUIT DESCRIPTION
DTC output mode is set by connecting terminals TC and CG of the DLC3.
The DTCs are indicated by blinking of the tire pressure warning lamp.
WIRING DIAGRAM
HINT:
When each warning lamp stays blinking, a ground short in the wiring of terminal TC of the DLC3 or an internal
ground short in each ECU is suspected.
DIDKK±01

DICY7±02
DI±1118
± DIAGNOSTICSSUPPLEMENTAL RESTRAINT SYSTEM
1312 Author: Date:
2005 SEQUOIA (RM1146U)
SUPPLEMENTAL RESTRAINT SYSTEM
PRECAUTION
NOTICE:
When disconnecting the battery terminal, initialize the following system after the terminal is recon-
nected.
System NameSee Page
Back Door Power Window Control SystemBE±77
1. HANDLING PRECAUTIONS FOR AIRBAG SENSOR
HINT:
In this section, the airbag sensor assembly, front airbag sensor LH, front airbag sensor RH, side airbag sen-
sor assembly LH, side airbag sensor assembly RH, curtain shield airbag sensor assembly LH, curtain shield
airbag sensor assembly RH and seat position airbag sensor assembly are collectively referred to as the air-
bag sensor.
(a) Before starting the following operations, wait at least 90 seconds after disconnecting the negative (±)
terminal of the battery:
(1) Replacement of the airbag sensor.
(2) Adjustment of the front/rear doors of the vehicle equipped with the side airbag and curtain shield
airbag (fitting adjustment).
(b) When connecting or disconnecting the airbag sensor connector, ensure that all of the sensors are
installed in the vehicle.
(c) Do not use an airbag sensor which has been dropped during the operation or transportation.
(d) Do not disassemble the airbag sensor.
2. INSPECTION PROCEDURE FOR VEHICLE INVOLVED IN ACCIDENT
(a) When the airbag has not deployed, confirm the DTC by checking the SRS warning light. If there is any
malfunction in the SRS airbag system, perform troubleshooting.
(b) When any of the airbags have deployed, replace the airbag sensor and check the installation condition.
(c) Perform the zero point calibration and sensitivity check under the condition is listed below (see page
DI±1128).

The occupant classification ECU is replaced.

Accessories (seatback tray, seat cover, etc.) are installed.

The passenger seat removed from the vehicle.

The passenger airbag ON/OFF indicator (ºOFFº) comes on when the passenger seat is not occu-
pied.

The vehicle is brought to the workshop for repair due to an accident or a collision.
NOTICE:
When an accident vehicle is brought into the workshop for repair, check the flatness of the body side
that is installed on the passenger seat. If the flatness is not within ± 3.0 mm (0.118 in.), repair it to
the specified range (within ± 3.0 mm (0.118 in.)).

DIDGH±01
H24019
Spiral CableFront Passenger
Airbag Assembly
Side Airbag Assembly LH (*1)
Front Seat
Outer Belt LH
Side Airbag Sensor
Assembly LH (*1)Side Airbag
Assembly RH (*1)
Front Airbag
Sensor LH Steering Wheel
PadFront Airbag
Sensor RH
Curtain Shield Airbag
Assembly RH (*1) Curtain Shield Airbag
Assembly LH (*1)
Curtain Shield Airbag
Sensor Assembly RH (*1)
SRS Warning Light
Side Airbag Sensor
Assembly RH (*1)
Front Seat
Outer Belt RH
RSCA OFF Indicator (*1)Passenger Airbag
ON/OFF Indicator Integration Control and Panel: Combination Meter:
Seat Position
Airbag Sensor
Assembly
Curtain Shield Airbag
Sensor Assembly LH (*1)
Occupant Classification ECU
Front Seat Inner Belt RH
Front Seat Inner Belt LH
Airbag Sensor Assembly*1: w/ Side and Curtain Shield Airbag
RSCA OFF
Switch (*1)
± DIAGNOSTICSSUPPLEMENTAL RESTRAINT SYSTEM
DI±1119
1313 Author: Date:
2005 SEQUOIA (RM1146U)
LOCATION