2001 TOYOTA SEQUOIA fuel

B17541
B17608
B17544
B17543
B17540
± SFIFUEL PUMP
SF±17
2751 Author: Date:
2005 SEQUOIA (RM1146U)
4. INSTALL FUEL SUB±TANK
(a) Connect the fuel suction plate No.2 to the fuel sub±tank
with the 3 snap±claws engaged.
(b) Connect the 2 tubes to the tube clamps.
(c) Connect the suction filter hose to the fuel sub±tank.
(d) Connect the fuel pump harness connector to the fuel suc-
tion plate No.1.
5. INSTALL FUEL SENDER GAUGE
(a) Install the fuel sender gauge to the fuel suction support.

B17539
SF±18
± SFIFUEL PUMP
2752 Author: Date:
2005 SEQUOIA (RM1146U)
(b) Connect the sender gauge connector to the fuel suction
plate No.1.

SF1XG±01
B17551
KeywayKey
B17552
ºSº Mark
Triangle Mark
B17553
SST
Rib
ºMAX.º Mark
ºAº Mark
Triangle Mark
B17489Tube Joint Clip
± SFIFUEL PUMP
SF±19
2753 Author: Date:
2005 SEQUOIA (RM1146U)
INSTALLATION
1. INSTALL FUEL PUMP ASSEMBLY
(a) Install a new gasket to the fuel tank.
(b) Install the fuel pump assembly to the fuel tank.
NOTICE:
Be careful not to bend the arm of the fuel sender gauge.
(c) Align the keyway of the fuel suction tube support with the
key of the fuel suction plate No.1.
(d) Apply MP grease to the entire interior surface of the fuel
pump gauge retainer.
(e) Align the triangle mark on the new fuel pump gauge re-
tainer with the ºSº mark on the fuel tank while pushing
down the fuel suction tube. Attach the fuel pump gauge
retainer.
(f) Rotate the fuel pump gauge retainer by hand. Use an SST
to tighten the fuel pump gauge retainer by turning it one
and a half times. The triangle mark on the fuel pump
gauge retainer must be positioned between the ºAº and
ºMAX.º marks on the fuel tank.
SST 09808±14020 (09808±01410, 09808±01420,
09808±01430)
NOTICE:
Do not use other tools in this operation. Damage to the fuel
pump gauge retainer and the fuel tank may result.
HINT:
A rib on the fuel pump gauge retainer fits into a tip of the SST.
2. CONNECT FUEL SUCTION TUBE
Connect the fuel pump tube and return tube to the fuel tank with
the tube joint clips.

SF±20
± SFIFUEL PUMP
2754 Author: Date:
2005 SEQUOIA (RM1146U)
NOTICE:

Check that there are no scratches or foreign objects
on the connecting part.

Check that the fuel tube joint is inserted securely.

Check that the tube joint clip is on the collar of the fuel
tube joint.

After installing the tube joint clip, check that the fuel
tube joint has not been pulled off.
3. CHECK FOR FUEL LEAKS
4. INSTALL FUEL TANK ASSEMBLY (See page SF±36)

SF0XZ±14
B17758
Vacuum Hose
Fuel Pressure Regulator
N´m (kgf´cm, ft´lbf)

Non±reusable part: Specified torque
O±RingFuel Return Hose
7.5 (80, 66 in.´lbf)
± SFIFUEL PRESSURE REGULATOR
SF±21
2755 Author: Date:
2005 SEQUOIA (RM1146U)
FUEL PRESSURE REGULATOR
COMPONENTS

B07053
Vacuum Hose
Fuel Return Hose
SF0Y0±10
B17759
SF±22
± SFIFUEL PRESSURE REGULATOR
2756 Author: Date:
2005 SEQUOIA (RM1146U)
REMOVAL
REMOVE FUEL PRESSURE REGULATOR
(a) Disconnect the vacuum hose from intake air resonator.
(b) Disconnect the fuel return hose from the pressure regula-
tor.
CAUTION:
Put a shop towel under the pressure regulator.
(c) Remove the 2 bolts, and pull out the pressure regulator.
(d) Remove the O±ring from the pressure regulator.

B17760
Install
Turn
SF0Y1±13
B07053
Vacuum Hose
Fuel Return Hose
± SFIFUEL PRESSURE REGULATOR
SF±23
2757 Author: Date:
2005 SEQUOIA (RM1146U)
INSTALLATION
1. INSTALL FUEL PRESSURE REGULATOR
(a) Apply a light coat of gasoline to a new O±ring, and install
it to the pressure regulator.
(b) While turning the pressure regulator left and right, install
it to the delivery pipe.
(c) Install the pressure regulator with the 2 bolts.
Torque: 7.5 N´m (76 kgf´cm, 66 in.´lbf)
(d) Connect the vacuum hose to intake air resonator.
(e) Connect the fuel return hose to the pressure regulator.
2. CHECK FOR FUEL LEAKS (See page SF±1)

B17460
Engine Wire Clamp
Fuel Pressure
Regulator

Gasket
Upper Gasket

Lower Gasket
RH Delivery Pipe
Front Fuel Pipe

Grommet
Injector

Insulator
Fuel Main Hose
VSV for EVAPFuel Pressure
Pulsation Damper

Gasket

O±Ring
Injector Connector
PCV Hose
N´m (kgf´cm, ft´lbf)

Non±reusable part: Specified torque
* For use with SST

Gasket
39 (400, 29)
39 (400, 29)
Fuel Return Pipe

O±Ring
Fuel Return Hose
Throttle Body
Cover Bracket
VSV Connector for EVAP
EVAP Hose
21 (214, 15 )
21 (214, 15 )
LH Delivery Pipe
7.5 (76, 66 in.´lbf)
18 (184, 13 )
* 33 (340, 24)
39 (400, 29)
7.5 (76, 66 in.´lbf)
SF±26
± SFIINJECTOR
2760 Author: Date:
2005 SEQUOIA (RM1146U)