2001 TOYOTA SEQUOIA start stop button

05_SEQUOIA_U (L/O 0408)
221
2005 SEQUOIA from Aug. '04 Prod. (OM34424U)
Compact disc player
There are two scan featuresÐyou can ei-
ther scan the tracks on a specific disc or
scan the first tracks of all the discs in the
magazine.
Scanning the tracks on a disc:
Quickly push and release the ªSCANº but-
ton. ªSCANº will appear on the display
and the player will scan all the tracks on
the disc you are listening to. To stop
scanning, push this button again. If the
player has scanned all the tracks on the
disc, it will stop scanning.
Scanning the first tracks of all the discs
in the magazine:
Push the ªSCANº button until you hear a
beep. ª
´SCANº will appear on the dis-
play and the player will scan the first
track of the next disc. To stop scanning,
push this button again. If the player has
scanned all the discs, it will stop scan-
ning.SEEK/TRACK (Seeking/Track up/down)
Radio
In the seek mode, the radio finds and
plays the next station up or down the
station band.
To seek the next station, quickly push and
release ª
º or ªº side of the ªSEEK/
TRACKº button. Do this again to find the
station after that.
Cassette Player
Use this button to skip up or down to
locate a song or recording.
You can select up to nine recordings (in-
cluding current one).
A blank space of at least 3 seconds is
considered to be a start of a recording.
When the beginning of a tape is reached,
the player automatically resumes play.
When the end of the tape is reached, the
player automatically reverses sides and
resumes normal play.
In addition, the feature may not work well
with some spoken word, live, or classical
recordings.Compact disc player
Use this button to skip up or down to a
different track.
Push ª
º or ªº side of the ªSEEK/
TRACKº button until the number of the
track you want to listen to appears on the
display. If you want to return to the begin-
ning of the current track, quickly push the
down side of the button one time.
Vehicles with rear seat entertainment sys-
temÐ
While the DVD player is in operation, the
chapter or track can be changed by push-
ing the ª
º or ªº side of the ªSEEK/
TRACKº button.
ST (Stereo reception) display
Your radio automatically changes to stereo
reception when a stereo broadcast is re-
ceived. ªSTº appears on the display. If the
signal becomes weak, the radio reduces
the amount of channel separation to prev-
ent the weak signal from creating noise.
If the signal becomes extremely weak, the
radio switches from stereo to mono recep-
tion.
TA P E
Push the ªTAPEº button to play a cassette
tape.

05_SEQUOIA_U (L/O 0408)
231
2005 SEQUOIA from Aug. '04 Prod. (OM34424U)
Cassette tape player
This button has the following featuresÐ
To fast forward or reverse:
Push and hold the ª
º (TUNE/TRACK)
button until ªFFº will appears on the dis-
play to forward a tape. Push and hold the
ª
º (TUNE/TRACK) button until ªREWº
appears on the display to rewind a tape.
To stop the tape while it is fast forward-
ing, push the ª
º (TUNE/TRACK) button.
To stop the tape while it is rewinding,
push the ª
º (TUNE/TRACK) button.
If a tape rewinds completely, the cassette
player will stop and then play that same
side. If a tape fast forwards completely,
the cassette will play the other side of the
tape using the auto±reverse feature.
To skip up or down to locate a song or
recording:
You can select up to nine recordings (in-
cluding current one).
Push the ª
º or ªº (TUNE/TRACK) but-
ton. ªFF 1º or ªREW 1º will appear on the
display.
Next, push either side of the track button
until the number on the display reaches
the number of tracks you want to skip. If
you push the button 10 times, the skip
feature will be turned off.For the skip feature to work correctly a
blank space of at least 3 seconds is con-
sidered to be a start of a recording.
When a beginning of a tape is reached,
the player automatically resumes play.
When the end of the tape is reached, the
player automatically reverses sides and
resumes normal play.
In addition, the feature may not work well
with some spoken, live, or classical re-
cordings.
Compact disc player
This button has the following featuresÐ
To skip up or down to a different track:
Push the ª
º or ªº (TUNE/TRACK) but-
ton until the number of the track you want
to listen to appears on the display. If you
want to return to the beginning of the
current track, quickly push the ª
º
(TUNE/TRACK) button one time.
To fast forward or reverse:
Push and hold the ª
º or ªº (TUNE/
TRACK) button to fast forward or reverse
within a compact disc. When you release
the button, the compact disc player will
resume playing.3. ªON/SOURCEº button
Push ªON/SOURCEº button to turn on the
rear seat audio system.
Use ªON/SOURCEº button to select an
audio mode when the rear seat audio sys-
tem is on. Each time you push this but-
ton, the system changes between the ra-
dio, cassette player and compact disc
player.
When you change the mode, the display
indicates which mode is selected.
When a cassette tape and compact discs
are not loaded in the front audio system,
only a radio mode can be selected in the
rear seat audio system.
If you push ªON/SOURCEº button to se-
lect the casette tape player mode or com-
pact disc player mode in that case, a
beep sounds from front audio system and
ªINVALIDº flashes on the screen for 6
seconds, and then the rear audio system
returns to the radio mode.
If you push ªON/SOURCEº button while
receiving an emergency broadcast, a beep
sounds and ªINVALIDº appears on the
screen to indicate that no button can be
operated.

05_SEQUOIA_U (L/O 0408)
246
2005 SEQUOIA from Aug. '04 Prod. (OM34424U)
2. ªº and ªº (TUNE/TRACK) buttons
Radio
Push the ª
º or ªº (TUNE/TRACK) but-
ton to tune or seek.
Tuning:
Quickly push and release the ª
º or ªº
(TUNE/TRACK) button. Each time you
push the button, the radio will step up or
down to another frequency. If you push
and hold the button, and the radio will go
into the seek mode.
Seeking:
Push and hold the ª
º or ªº (TUNE/
TRACK) button. The radio will seek up or
down for a station of the nearest frequen-
cy and will stop on reception. Each time
you push the button, the stations will be
searched one after another.
Cassette tape player
This button has the following featuresÐ
To fast forward or reverse:
Push and hold the ª
º (TUNE/TRACK)
button until ªFFº will appears on the dis-
play to forward a tape. Push and hold the
ª
º (TUNE/TRACK) button until ªREWº
appears on the display to rewind a tape.To stop the tape while it is fast forward-
ing, push the ª
º (TUNE/TRACK) button.
To stop the tape while it is rewinding,
push the ª
º (TUNE/TRACK) button.
If a tape rewinds completely, the cassette
player will stop and then play that same
side. If a tape fast forwards completely,
the cassette will play the other side of the
tape using the auto±reverse feature.
To skip up or down to locate a song or
recording:
You can select up to nine recordings (in-
cluding current one).
Push the ª
º or ªº (TUNE/TRACK) but-
ton. ªFF 1º or ªREW 1º will appear on the
screen.
Next, push either side of the track button
until the number on the screen reaches
the number of tracks you want to skip. If
you push the button 10 times, the skip
feature will be turned off.
For the skip feature to work correctly a
blank space of at least 3 seconds is con-
sidered to be a start of a recording.
When a beginning of a tape is reached,
the player automatically resumes play.
When the end of the tape is reached, the
player automatically reverses sides and
resumes normal play.In addition, the feature may not work well
with some spoken, live, or classical re-
cordings.
Compact disc player
This button has the following featuresÐ
To skip up or down to a different track:
Push the ª
º or ªº (TUNE/TRACK) but-
ton until the number of the track you want
to listen to appears on the display. If you
want to return to the beginning of the
current track, quickly push the ª
º
(TUNE/TRACK) button one time.
To fast forward or reverse:
Push and hold the ª
º or ªº (TUNE/
TRACK) button to fast forward or reverse
within a compact disc. When you release
the button, the compact disc player will
resume playing.

05_SEQUOIA_U (L/O 0408)
312
2005 SEQUOIA from Aug. '04 Prod. (OM34424U)
CALIBRATING THE COMPASS (circling
calibration)
Sometimes the direction display on the
compass may not change after a turn. In
this case, the compass needs to be cali-
brated.
To calibrate the compass manually, do the
following;
1. Stop the vehicle in a level place and
switch the display to the outside tem-
perature. (To switch to this mode, see
ªÐOutside temperature and cruise in-
formation displayº on page 307 in this
Section.)2. Push and hold both the ªMODEº and
ªE/Mº buttons simultaneously for 10
seconds until the ªCALº indication ap-
pears on the compass display. (At this
time, the compass display is locked in
ªNº.)3. Drive the vehicle in a circle at 8 km/h
(5 mph) or less. If there is not enough
space to drive in a circle, drive around
the block.
When the ªCALº indication goes off and
the compass returns to the normal mode,
calibration is complete.
If you want to restart the calibration be-
fore it is complete, push both of the
ªMODEº and ªE/Mº buttons simultaneously
for 10 seconds again.