2001 TOYOTA SEQUOIA Page 18

DI±1878
± DIAGNOSTICSBACK DOOR CONTROL SYSTEM
2072 Author: Date:
2005 SEQUOIA (RM1146U)
INSPECTION PROCEDURE
HINT:
When using the hand±held tester, start the inspection from step 1 and when not using the hand±held tester,
start from step 2.
1 Check the back door power window pulse sensor using hand±held tester.
PREPARATION:
(a) Connect the hand±held tester to the DLC3.
(b) Turn the ignition switch ON.
CHECK:
According to the display on the tester, read the DATA LIST.
BACK±DOOR:
ItemMeasurement Item/
Display (Range)Normal ConditionDiagnostic Note
P/W POSITION
Back door power win-
dow position/CLOSE
or OPENCLOSE: Back door power window is fully closed
OPEN: Back door power window is opened±
OK:
Indication on the tester switches between CLOSE and OPEN in accordance with the back door
power window status.
OK Proceed to next circuit inspection shown in
problem symptoms table (See page DI±1854).
NG
2 Check back door power window pulse sensor (See page BE±75).
NG Replace the back door power window regulator
assembly.
OK

± DIAGNOSTICSBACK DOOR CONTROL SYSTEM
DI±1879
2073 Author: Date:
2005 SEQUOIA (RM1146U)
3 Check wire harness and connector between back door power window pulse sen-
sor and back door ECU (See page IN±35).
NG Repair or replace wire harness or connector.
OK
Proceed to next circuit inspection shown in
problem symptoms table
(See page DI±1854).

± DIAGNOSTICSBACK DOOR CONTROL SYSTEM
DI±1881
2075 Author: Date:
2005 SEQUOIA (RM1146U)
INSPECTION PROCEDURE
HINT:
When using the hand±held tester, start the inspection from step 1 and when not using the hand±held tester,
start from step 2.
1 Check the rear wiper motor using hand±held tester.
PREPARATION:
(a) Connect the hand±held tester to the DLC3.
(b) Turn the ignition switch ON.
CHECK:
According to the display on the tester, perform the ACTIVE TEST.
BACK±DOOR:
ItemTest detailsDiagnostic note
REAR WIPEROperate the rear wiper motor ON/OFF±
OK:
Rear wiper motor operates normally.
OK Proceed to next circuit inspection shown in
problem symptom table (See page DI±1854).
NG
2 Check rear wiper motor (See page BE±49).
NG Replace the rear wiper motor.
OK
3 Check wire harness and connector between wiper motor and back door ECU
(See page IN±35).
NG Repair or replace wire harness or connector.
OK
Proceed to next circuit inspection shown in
problem symptoms table
(See page DI±1854).

± DIAGNOSTICSBACK DOOR CONTROL SYSTEM
DI±1883
2077 Author: Date:
2005 SEQUOIA (RM1146U)
INSPECTION PROCEDURE
HINT:
When using the hand±held tester, start the inspection from step 1 and when not using the hand±held tester,
start from step 2.
1 Check the back door key lock and unlock switch using hand±held tester.
PREPARATION:
(a) Connect the hand±held tester to the DLC3.
(b) Turn the ignition switch ON.
CHECK:
According to the display on the tester, read the DATA LIST.
BACK±DOOR:
ItemMeasurement Item/
Display (Range)Normal ConditionDiagnostic Note
KEY SW (UNLOCK)Unlock SW linked with
the key/ON or OFFON: Back door lock is in unlock position
OFF: Back door lock is in lock position±
KEY SW (LOCK)Unlock SW linked with
the key/ON or OFFON: Back door lock is in lock position
OFF: Back door lock is in unlock position±
UP/DOOR KEY
Back door key lock
and unlock switch
linked window open
and close/AVAIL or
NOT AVL
AVAIL: Key±linked open and close SET
NOT AVL: Key±linked open and close UNSET*1
DOWN/DOOR KEY
Back door key lock
and unlock switch
linked window open
and close/AVAIL or
NOT AVL
AVAIL: Key±linked open and close SET
NOT AVL: Key±linked open and close UNSET*1
*1: When the ignition key is not in the key cylinder and the back door is locked, turning and holding the back
door key in the lock position for 1.5 seconds or more activates the back door ECU to operate the power win-
dow motor and close the power window.
Similarly, turning and holding the back door key in the unlock position for 1.5 seconds or more when the back
door is unlocked will open the power window.
OK:
Indication on the tester switches between ON and OFF in accordance with the back door key
lock and unlock switch status.
OK Proceed to next circuit inspection shown in
problem symptoms table (See page DI±1854).
NG

DI±1884
± DIAGNOSTICSBACK DOOR CONTROL SYSTEM
2078 Author: Date:
2005 SEQUOIA (RM1146U)
2 Check the back door key lock and unlock switch (See page BE±79).
NG Replace the back door key lock and unlock
switch.
OK
3 Check wire harness and connector between back door key lock and unlock
switch and back door ECU (See page IN±35).
NG Repair or replace wire harness or connector.
OK
Proceed to next circuit inspection shown in
problem symptoms table
(See page DI±1854).

DI±1886
± DIAGNOSTICSBACK DOOR CONTROL SYSTEM
2080 Author: Date:
2005 SEQUOIA (RM1146U)
INSPECTION PROCEDURE
1 Check rear wiper motor (See page BE±49).
NG Replace the rear wiper motor.
OK
2 Check wire harness and connector between rear wiper motor and back door ECU
(See page IN±35).
NG Repair or replace wire harness or connector.
OK
Proceed to next circuit inspection shown in
problem symptoms table
(See page DI±1854).

DIDF6±01
± DIAGNOSTICSMULTIPLEX COMMUNICATION SYSTEM
DI±1887
2081 Author: Date:
2005 SEQUOIA (RM1146U)
MULTIPLEX COMMUNICATION SYSTEM
PRECAUTION
NOTICE:
When disconnecting the battery terminal, initialize the following system after the terminal is recon-
nected.
System NameSee Page
Back Door Power Window Control SystemBE±77

DI3IO±11
Customer Problem Analysis
Vehicle Brought to Workshop
Problem Symptom ConfirmationSymptom Simulation Problem does not
occur
Check DTC
Normal code
Problem Symptoms Table
Identification of Problem
Repair
Confirmation Test
EndTitles inside
are titles of pages in this
manual, with the page number indicated in
the bottom portion. See the indicated pages
for detailed explanations.
1
23
4
6
8P. IN±24
*1P. DI±1893
P. DI±1904Malfunction code
Problem
occurs
Circuit Inspection
P. DI±1908 ± DI±1952
See page
Body control system
Driver door control system
Passenger door control systemSystem
DI±1682
DI±1780
DI±1816
DI±1610
Step 4, 8: Diagnostic steps permitting the use of the hand±held tester.*15
7
Combination meter system
Slide roof control system
DI±1662 DI±1852 Back door control system
Power seat control system
w/ Driving position memoryDI±1505
Supplemental restraint system
Air conditioning systemDI±1126
DI±2301 DI±1892
± DIAGNOSTICSMULTIPLEX COMMUNICATION SYSTEM
2086 Author: Date:
2005 SEQUOIA (RM1146U)
HOW TO PROCEED WITH TROUBLESHOOTING
Perform troubleshooting in accordance with the procedure on the following page.