2000 TOYOTA CAMRY torque

BR0BF±02
W03243
SST BR±54
± BRAKEABS ACTUATOR (DENSO Made)
2077 Author: Date:
REMOVAL
1. REMOVE RIGHT FRONT FENDER LINER
2. REMOVE A/C TUBE CLAMP BRACKET BOLT
3. DISCONNECT BRAKE LINES
Using SST, disconnect the 6 brake lines from the ABS actuator.
SST 09751±36011
Torque: 15 N´m (155 kgf´cm, 11 ft´lbf)
4. REMOVE ABS ACTUATOR ASSEMBLY
(a) Disconnect the 2 connectors.
(b) Remove the 2 blots, 2 nuts and ABS actuator assembly.
Torque: 19 N´m (195 kgf´cm, 14 ft´lbf)
5. REMOVE ABS ACTUATOR
(a) Remove the 2 nuts and ABS actuator from actuator
bracket.
Torque: 5.4 N´m (55 kgf´cm, 48 in.´lbf)
(b) Remove the 2 holders and 3 cushions from the ABS ac-
tuator.

BR0BH±03
W03327
Holder
Cushion
CushionA/C Tube Clamp Bracket ABS Actuator
(w/ ECU)
Actuator Bracket
N´m (kgf´cm, ft´lbf): Specified torque
9.0 (92, 80 in.´lbf)
15 (155, 11)
19 (195, 14)
19 (195, 14)
F07215
Actuator ECU

Non±reusable part
N´m (kgf´cm, ft´lbf): Specified torque

2.6 (27, 23 in.´lbf)
BR±56
± BRAKEABS ACTUATOR (BOSCH Made)
2079 Author: Date:
ABS ACTUATOR (BOSCH Made)
COMPONENTS

BR0BI±03
W03324
SST
W03325Release Bar
± BRAKEABS ACTUATOR (BOSCH Made)
BR±57
2080 Author: Date:
REMOVAL
1. REMOVE RIGHT FRONT FENDER LINER
2. REMOVE A/C TUBE CLAMP BRACKET BOLT
3. DISCONNECT BRAKE LINES
Using SST, disconnect the 6 brake lines from the ABS actuator.
SST 09751±36011
Torque: 15 N´m (155 kgf´cm, 11 ft´lbf)
4. DISCONNECT CONNECTOR
Pull out the release bar, and disconnect the connector.
5. REMOVE ABS ACTUATOR ASSEMBLY
Remove the 2 bolts, 2 nuts and ABS actuator assembly.
Torque: 19 N´m (195 kgf´cm, 14 ft´lbf)
6. REMOVE ABS ACTUATOR
(a) Remove the 2 nuts and ABS actuator.
Torque: 9.0 N´m (92 kgf´cm, 80 in.´lbf)
(b) Remove the 2 holders and 3 cushions from the ABS ac-
tuator.

BR0BJ±02
W03326
BR±58
± BRAKEABS ACTUATOR (BOSCH Made)
2081 Author: Date:
DISASSEMBLY
1. DISCONNECT CONNECTOR
Disconnect the connector, and remove the wire harness from
the harness guide.
2. REMOVE ECU
(a) Using a T20 torx wrench, loosen the 6 screws.
Torque: 2.6 N´m (27 kgf´cm, 23 in.´lbf)
NOTICE:

When removing the ECU from the actuator, it must be
removed it upward.

At the time of reassembly, tighten the screws accord-
ing to the order shown on the left.
(b) Remove the ECU from the actuator.
NOTICE:
Protect the actuator in order to prevent sealing surface
from getting dirty and causing damage on the valve body.
If the dirt and the like are stuck to the sealing surface, use
plastic tools or soft objects to remove the dirt. Do not use
chemical solvents.

BR077±04
W03272
Cushion
HolderABS & TRAC
Actuator
A/C Tube Clamp
Bracket
Actuator Bracket
15 (155, 11)
5.4 (55, 48 in.´lbf)
19 (195, 14)
N´m (kgf´cm, ft´lbf) : Specified torque
19 (195, 14)
Cushion
20 (200, 14)
BR±64
± BRAKEABS & TRAC ACTUATOR
2087 Author: Date:
COMPONENTS

BR078±03
W03245
SST
± BRAKEABS & TRAC ACTUATOR
BR±65
2088 Author: Date:
REMOVAL
1. REMOVE RIGHT FRONT FENDER LINER
2. REMOVE A/C TUBE CLAMP BRACKET BOLT
3. DISCONNECT BRAKE LINES
Using SST, disconnect the 6 brake lines from the ABS & TRAC
actuator.
SST 09751±36011
Torque:
10 mm nut 15 N´m (155 kgf´cm, 11 ft´lbf)
12 mm nut 20 N´m (200 kgf´cm, 14 ft´lbf)
4. REMOVE ABS & TRAC ACTUATOR ASSEMBLY
(a) Disconnect the 2 connectors.
(b) Remove the 2 blots, 2 nuts and ABS & TRAC actuator as-
sembly.
Torque: 19 N´m (195 kgf´cm, 14 ft´lbf)
5. REMOVE ABS & TRAC ACTUATOR
(a) Remove the 2 nuts and ABS & TRAC actuator from actua-
tor bracket.
Torque: 5.4 N´m (55 kgf´cm, 48 in.´lbf)
(b) Remove the 2 holders and 3 cushions from the ABS &
TRAC actuator.

BR0BQ±03
W03273
Front Speed Sensor
N´m (kgf´cm, ft´lbf) : Specified torque
5.4 (55, 48 in.´lbf)
7.8 (80, 69 in.´lbf)
29 (300, 21)
± BRAKEFRONT SPEED SENSOR
BR±67
2090 Author: Date:
FRONT SPEED SENSOR
COMPONENTS

BR0BR±03
R00327
W04507
BR±68
± BRAKEFRONT SPEED SENSOR
2091 Author: Date:
REMOVAL
1. DISCONNECT SPEED SENSOR CONNECTOR
(a) Remove the fender liner.
(b) Disconnect the speed sensor connector.
2. REMOVE SPEED SENSOR
(a) Remove the bolt, flexible hose and speed sensor harness
clamp from the shock absorber.
Torque: 29 N´m (300 kgf´cm, 21 ft´lbf)
(b) Remove the resin clip and clamp bolt holding the sensor
harness to the body.
Torque: 5.4 N´m (55 kgf´cm, 48 in.´lbf)
(c) Remove the speed sensor from the steering knuckle.
Torque: 7.8 N´m (80 kgf´cm, 69 in.´lbf)