1998 TOYOTA LAND CRUISER brake sensor

SA14F-04
F04367
F04368
F05795
A
B
C
F05161
SA-26
- SUSPENSION AND AXLEFRONT DRIVE SHAFT
1976 Author
: Date
:
2004 LAND CRUISER (RM1071U)
REMOVAL
1. REMOVE FRONT WHEEL
Torque: 131 N´m (1,340 kgf´cm, 97 ft´lbf)
2. REMOVE BRAKE CALIPER
(a) Remove the bolt and disconnect the flexible hose from
the steering knuckle.
Torque: 28 N´m (290 kgf´cm, 21 ft´lbf)
(b) Remove the 2 bolts, washers and brake caliper.
Torque: 123 N´m (1,250 kgf´cm, 91 ft´lbf)
(c) Support the brake caliper securely.
3. REMOVE SNAP RING
(a) Using a screwdriver and hammer, remove the grease cap
from the flange.
(b) Using snap ring pliers, remove the snap ring.
4. DISCONNECT ABS SPEED SENSOR AND WIRE HAR-
NESS
Remove the 3 bolts and disconnect the ABS speed sensor and
wire harness.
Torque:
A: 8.0 N´m (82 kgf´cm, 71 in.´lbf)
B: 13 N´m (130 kgf´cm, 10 ft´lbf)
C: 28 N´m (290 kgf´cm, 21 ft´lbf)
5. DISCONNECT STEERING KNUCKLE ARM
Remove the 2 bolts and disconnect the steering knuckle arm.
Torque: 147 N´m (1,500 kgf´cm, 108 ft´lbf)
HINT:
At the time of installation, please refer to the following items.

Clean the threads of the 2 bolts and steering knuckle with
toluene or trichloroethylene.

SA14J-04
F05437
 Oil Seal
Drive Shaft Cotter PinBrake Caliper
Steering Knuckle
with Axle Hub
 Snap Ring
 Cotter Pin
 Grease Cap
Steering Knuckle Arm

147 (1,500, 108)
123 (1,250, 91)
28 (290, 21)
8.0 (82, 71 in.´lbf)
13 (130, 10)
ABS Speed Sensor
and Wire Harness
28 (290, 21)
159 (1,625, 117)
110 (1,125, 81)
 Snap Ring
N´m (kgf´cm, ft´lbf): Specified torque
 Non-reusable part

Precoated part SA-34
- SUSPENSION AND AXLEFRONT DIFFERENTIAL SIDE GEAR SHAFT OIL SEAL
1984 Author
: Date
:
2004 LAND CRUISER (RM1071U)
FRONT DIFFERENTIAL SIDE GEAR SHAFT OIL SEAL
COMPONENTS

SA15C-02
F05438
123 (1,250, 91)

Oil Seal

O-Ring
Parking Brake Assembly
Disc
103 (1,050, 76)
Brake Caliper

Bearing Retainer

ABS Speed Sensor Rotor

Snap Ring
Bearing Case
Backing Plate
Serration Bolt

Oil Seal

Hub Bolt
Oil Deflector

Gasket
Axle Shaft
N´m (kgf´cm, ft´lbf): Specified torque

Non-reusable partx5
15 (150, 11)

Hub Bolt
Clip

Bearing Retainer

Plate Washer

Bearing
- SUSPENSION AND AXLEREAR AXLE SHAFT
SA-83
2033 Author
: Date
:
2004 LAND CRUISER (RM1071U)
REAR AXLE SHAFT
COMPONENTS

SA15I-06
SA-92
- SUSPENSION AND AXLEREAR AXLE SHAFT
2042 Author
: Date
:
2004 LAND CRUISER (RM1071U)
INSTALLATION
Installation is in the reverse order of removal (See page SA-84).
HINT:
After installation, fill the brake reservoir with brake fluid, bleed the brake system (See page BR-4), check
for leaks and check the ABS speed sensor signal (See page DI-505).

SA15R-1 1
SA-1 16
- SUSPENSION AND AXLEREAR DIFFERENTIAL CARRIER
2066 Author
: Date
:
2004 LAND CRUISER (RM1071U)
INSTALLATION
Installation is in the reverse order of removal (See page SA-100).
HINT:
After installation, fill the differential with hypoid gear oil (See page SA-95), fill the brake reservoir with brake
fluid, bleed the brake system (See page BR-4), check for leaks and check the ABS speed sensor signal (See
page DI-505).

SA15X-09
SA-138
- SUSPENSION AND AXLEREAR DIFFERENTIAL CARRIER (w/ Diff. Lock)
2088 Author
: Date
:
2004 LAND CRUISER (RM1071U)
INSTALLATION
Installation is in the reverse order of removal (See page SA-100).
AFTER INSTALLATION, FILL DIFFERENTIAL WITH HYPOID GEAR OIL (See page SA-95)
HINT:
After installation, fill the differential with hypoid gear oil (See page SA-95), fill the brake reservoir with brake
fluid, bleed the brake system (See page BR-4), check for leaks and check the ABS speed sensor signal (See
page DI-505).

SA164-10
SA-162
- SUSPENSION AND AXLEREAR DIFFERENTIAL CARRIER (w/ LSD)
2112 Author
: Date
:
2004 LAND CRUISER (RM1071U)
INSTALLATION
Installation is in the reverse order of removal (See page SA-141).
HINT:
After installation, fill the differential with hypoid gear oil for LSD (See page SA-95), fill the brake reservoir
with brake fluid, bleed the brake system (See page BR-4), check for leaks and check the ABS speed sensor
signal (See page DI-505).

SA149-05
F05160
 Cotter Pin
 Cotter Pin
159 (1,625, 117)
 Cotter Pin
Axle Hub with Disc
Tie Rod End
ABS Speed Sensor
and Wire Harness28 (290, 21)
13 (130, 10)
Brake Caliper
Dust Cover
 Gasket
 Oil Seal
18 (185, 13)
Bearing
Claw Washer
Adjusting Nut
Lock Nut  Lock Washer
 Gasket
Flange
 Snap Ring
 Grease Cap
33 (335, 24)
x6
Steering Knuckle
 Oil Seal
 Bushing
 Bearing
147 (1,500, 108)

Steering Knuckle Arm
N´m (kgf´cm, ft´lbf) : Specified torque
 Non-reusable part

Precoated part
Steering Knuckle
8.0 (82, 71 in.´lbf)
123 (1,250, 91)
122 (1,250, 90)
28 (290, 21)

64 (650, 47)
See page SA-16
110 (1,125, 81)
- SUSPENSION AND AXLESTEERING KNUCKLE
SA-19
1969 Author
: Date
:
2004 LAND CRUISER (RM1071U)
STEERING KNUCKLE
COMPONENTS