1997 TOYOTA SUPRA torque

R06944
R07325
SST
R07039
Matchmarks
- SUSPENSION AND AXLEREAR LOWER SUSPENSION ARM AND STRUT ROD
SA-103
1793 Author
: Date
:
1997 SUPRA (RM502U)
6. REMOVE LOWER SUSPENSION ARM NO.2
(a) Remove the nut, washer and bolt, then disconnect the
shock absorber from the lower suspension arm No.2.
Torque: 137 N´m (1,400 kgf´cm, 101 ft´lbf)
HINT:
At the time of installation, after stabilizing the suspension,
torque the nuts.
(b) Remove the nut and disconnect the stabilizer bar link from
the lower suspension arm No.2.
Torque: 74 N´m (750 kgf´cm, 54 ft´lbf)
(c) Loosen the nut.
Torque: 150 N´m (1,525 kgf´cm, 110 ft´lbf)
(d) Using SST, disconnect the lower suspension arm No.2
from the rear axle carrier.
SST 09610-20012
NOTICE:
Be careful not to damage the ball joint bolt.
(e) Remove the nut.
(f) Place matchmarks on the adjusting cam No.2 and sub-
frame.
(g) Remove the nut, washer, adjusting cam palate No.2, ad-
justing cam No.2 and lower suspension arm No.2.
Torque: 184 N´m (1,880 kgf´cm, 136 ft´lbf)
HINT:
At the time of installation, after stabilizing the suspension,
torque the nut.

SA0QI-01
R07189R07190F03292
Lower suspension arm No.1
Lower suspension arm No.2 SA-104
- SUSPENSION AND AXLEREAR LOWER SUSPENSION ARM AND STRUT ROD
1794 Author
: Date
:
1997 SUPRA (RM502U)
INSPECTION
INSPECT LOWER BALL JOINT FOR ROTATION CONDI-
TION
(a) As shown in the illustration, flip the ball joint stud back and
forth 5 times, before installing the nut.
(b) Using a torque wrench, turn the nut continuously one turn
every 2 - 4 seconds and take the torque reading on the
5th turn.
Turning torque:
Lower suspension arm No.1 and No.2:
1.0 - 3.4 N´m (10 - 35 kgf´cm, 9 - 30 in.´lbf)

SA0QM-01
Z18436
Bush Stopper SA-108
- SUSPENSION AND AXLEREAR STABILIZER BAR
1798 Author
: Date
:
1997 SUPRA (RM502U)
REMOVAL
1. DISCONNECT EXHAUST PIPE SUPPORTS
(See page SA-51)
2. REMOVE BOTH STABILIZER BAR LINKS
Remove the 4 nuts and 2 stabilizer bar links.
Torque: 74 N´m (750 kgf´cm, 54 ft´lbf)
3. REMOVE BOTH STABILIZER BAR BRACKETS
Remove the 4 bolts and both stabilizer bar brackets from the
sub-frame.
Torque: 31 N´m (320 kgf´cm, 23 ft´lbf)
4. REMOVE BOTH CUSHIONS AND BRACKETS
Remove the 2 cushions and brackets from the stabilizer bar.
HINT:
At the time of installation, install the cushion to the outside of the
bush stopper.

SA0QN-01
R06949
- SUSPENSION AND AXLEREAR STABILIZER BAR
SA-109
1799 Author
: Date
:
1997 SUPRA (RM502U)
INSPECTION
INSPECT STABILIZER BAR LINK BALL JOINT FOR ROTA-
TION CONDITION
(a) As shown in the illustration, flip the ball joint stud back and
forth 5 times, before installing the nut.
(b) Using a torque wrench, turn the nut continuously taking
2 - 4 seconds per a turn and take the torque reading on
the 5th turn.
Turning torque:
0.05 - 1.0 N´m (0.5 - 10 kgf´cm, 0.4 - 8.7 in.´lbf)

SS00G-01
V00079
ClassDiameter
mmPitch
mmSpecified torque
Hexagon head bolt
Hexagon flange bolt
N´m kgf´cm
ft´lbf N´mkgf´cm
ft´lbf
in.´lbf
in.´lbf
in.´lbfin.´lbf
in.´lbf
in.´lbf SS-2
- SERVICE SPECIFICATIONSSTANDARD BOLT
159 Author
: Date
:
1997 SUPRA (RM502U)
SPECIFIED TORQUE FOR STANDARD BOLTS

SS0DJ-01
- SERVICE SPECIFICATIONSMAINTENANCE
SS-3
160 Author
: Date
:
1997 SUPRA (RM502U)
MAINTENANCE
TORQUE SPECIFICATION
Part tightenedN´mkgf´cmft´lbf
Front seat x Body3737527
Front suspension member x Body Front side
Rear side125
2001,280
2,04092
148
Rear suspension member x Body1751,790129
Rear suspension member rear cushion x Body5859043

SS0DL-02
- SERVICE SPECIFICATIONSENGINE MECHANICAL (2JZ-GE)
SS-7
164 Author
: Date
:
1997 SUPRA (RM502U)
TORQUE SPECIFICATION
Part tightenedN´mkgf´cmft´lbf
Cylinder head cover x Cylinder head8.38574 in.´lbf
Timing belt plate x Oil pump7.88069in.´lbf
Idler pulley x Oil pump3435025
Crankshaft pulley x Crankshaft3243,300239
Camshaft timing pulley x Camshaft7981059
Timing belt tensioner x Oil pump2627020
PS pump front bracket x PS vane pump5859043
PS pump front bracket x A/C compressor5253038
PS pump pulley x PS vane pump4343032
Drive belt tensioner x Cylinder head2121015
EGR cooler x Cylinder head8.89078 in.´lbf
ECT sensor x Cylinder head2525018
ECT sensor gauge x Cylinder head1515011
Engine hanger x Cylinder head3940029
Cylinder head x Cylinder block 1st
2nd
3rd34
Turn 90°
Turn 90°350
Turn 90°
Turn 90°25
Turn 90°
Turn 90°
Camshaft bearing cap x Cylinder head2020014
No.4 timing belt cover x Cylinder head7.88069 in.´lbf
Intake manifold x Cylinder head2728020
Fuel input pipe x Delivery pipe4242030
Intake manifold stay x Intake manifold, Cylinder block3940029
Water outlet x Cylinder head2121015
Air intake chamber x Intake manifold2728020
Vacuum control valve set x Intake manifold2121015
No.2 vacuum pipe x Air intake chamber2728020
No.2 vacuum pipe x Intake manifold2728020
Air intake chamber stay x Cylinder head1818513
Air intake chamber stay x Air intake chamber1818513
PS pump rear stay x PS pump bracket3940029
PS pump rear stay x Intake manifold stay3940029
PS vane pump x PS pump bracket5859043
Exhaust manifold x Cylinder head3940029
Main bearing cap x Cylinder block 1st
2nd44
Turn 90°450
Turn 90°33
Turn 90°
Connecting rod cap x Connecting rod 1st
2nd29
Turn 90°300
Turn 90°22
Turn 90°
Rear oil seal retainer x Cylinder block5.96052 in.´lbf
Crankshaft position sensor x Cylinder block8.89078 in.´lbf
Engine mounting bracket x Cylinder block5859043
Engine coolant drain plug x Cylinder block2930022
Union nut x Cylinder block5555041
Oil pressure switch x Cylinder block1415011
Knock sensor x Cylinder block4445033

SS-8
- SERVICE SPECIFICATIONSENGINE MECHANICAL (2JZ-GE)
165 Author
: Date
:
1997 SUPRA (RM502U) Fuel pipe support x Cylinder block
2829021
Oil filter bracket x Cylinder block8890065
No.2 water bypass pipe x Water pump, Cylinder block2121015
Flywheel (M/T) x x Crankshaft 1st
2nd49
Turn 90°500
Turn 90°36
Turn 90°
Drive plate (A/T) x Crankshaft8385061
Clutch cover x Flywheel M/T1919514
Cylinder block x Transmission 14 mm head
17 mm head39
72400
73029
43
Drive plate x Torque converter clutch A/T3334025
Oil cooler tube x Union for transmission A/T3435025
Rear support member x Body2526019
Rear support member x Engine rear mounting insulator1313510
Front suspension crossmember x Engine mounting insulator5960043
Transmission shift lever x Shift lever retainer M/T1919514
Transmission control rod x Shift lever A/T131309
No.2 front exhaust pipe x Exhaust manifold6263046
Pipe support bracket x Transmission4344032
No.2 front exhaust pipe x Front exhaust pipe5859043
Clutch release cylinder x Transmission M/T131309
Ground strap (M/T) x Transmission3738027
A/C compressor x Cylinder block Stud bolt
Bolt and nut26
52265
53019
38
PS pump bracket x A/C compressor5859043
PS pump bracket x Cylinder block3940029
Fuel inlet hose x Fuel pipe support2930022
Front exhaust pipe x Center exhaust pipe5859043
Center exhaust pipe x Tailpipe1919514
Heated oxygen sensor x Front exhaust pipe2020014