W01258
SST
W01259
SST
Bearing
W04191
SST
Oil SealPress SR−56
− STEERINGPOWER STEERING GEAR
1996 RAV4 (RM447U)
5. INSTALL CYLINDER END STOPPER
(a) Install the stopper into the rack housing.
(b) Using snap ring pliers, install a new snap ring to the rack
housing.
6. AIR TIGHTNESS TEST
(a) Install SST to the union of the rack housing.
SST 09631−22030
(b) Apply 53 kPa (400 mmHg, 15.75 in.Hg) of vacuum for
about 30 seconds.
(c) Check that there is no change in the vacuum.
If there is change in the vacuum, check the installation of the oil
seals.
7. INSTALL CONTROL VALVE ASSEMBLY
(a) Coat the teflon rings with power steering fluid.
(b) Install the control valve assembly into the rack housing.
NOTICE:
Be careful not to damage the teflon rings and oil seal.
8. INSTALL BEARING
Using SST, press in a new bearing.
SST 09612−22011
9. INSTALL OIL SEAL
(a) Coat a new oil seal lip with power steering fluid.
(b) Using SST and a press, press in the oil seal.
SST 09612−22011
NOTICE:
Make sure to install the oil seal facing the correct direction.
(c) Using snap ring pliers, install a new snap ring to the rack
housing.
10. INSTALL DUST COVER
11. INSTALL BEARING
Install the spacer and a new bearing into the rack housing.
