1996 ACURA RL KA9 relay

Fuel Suppl y Syste m
PGM-F I Mai n Rela y (cont'd )
(From pag e 11-147 )
Chec k fo r a n ope n i n th e wir e
(IGS W line) :
Measur e voltag e betwee n th e
PGM-F I mai n rela y 4 P connecto r
termina l No . 4 an d bod y ground .
I s ther e batter y voltage ?
YES
Chec k fo r a n ope n o r shor t i n th e
wir e (ST S line) :
1. Tur n th e ignitio n switc h to th eSTAR T (III ) positio n (trans -mission in o r position) .2. Measur e th e voltag e betwee n
th e PGM-F I mai n rela y 8 P con -
necto r termina l No . 3 an d
bod y ground .
I s ther e batter y voltage ?
YES
Chec k fo r a n ope n i n th e wir e(FLR 1 line) :1. Tur n th e ignitio n switc h OFF .2. Disconnec t th e PC M connec -tor A (2 6 P ) fro m th e PCM .3. Chec k fo r continuit y betwee n
th e PGM-F I mai n rela y 8 P
connecto r termina l No . 2 an d
PC M connecto r termina l A4 . PGM-F
I MAI N RELA Y 4P CONNECTO R (C432 )
IGSW(BLK/YEL )
NO
Repai r ope n o r shor t i n th e
wir e betwee n th e PGM-F I
mai n rela y an d th e No . 2 5 I G
COI L (3 0 A ) fuse .
Replac e th e No . 2 5 I G COI L
(3 0 A ) fus e in th e under-das h
fuse/rela y box . Wir
e sid e o f femal e terminal s
PGM-F I MAI N RELA Y 8 P CONNECTO R (C433 )
NO
Repai r ope n o r shor t i n th e
wir e betwee n th e PGM-F I
mai n rela y an d th e No . 1 4
STARTE R SIGNA L (7. 5 A ) fuse .
Replac e th e No . 1 4 STARTE R
SIGNA L (7. 5 A ) fus e i n the
under-das h fus e box . Wir
e sid e o f femal e terminal s
I s ther e continuity ? Repai
r ope n in th e wir e betwee n
the PC M (A4 ) an d the PGM-F I
mai n relay . PC
M CONNECTO R A (26P )
Wir e sid e o f femal e terminal s
(T o pag e 11-149 )
YES
NO
ProCarManuals.com

(From pag e 11-148 )
Chec k fo r a n ope n i n th e wire s
(IGP1 , IGP 2 lines) :
1 . Reconnec t th e PC M connecto r
A (26P) .2. Reconnec t th e PGM-F I mai n
rela y 4 P an d 8 P connectors .
3 . Tur n th e ignitio n switc h O N (II) .
4 . Measur e voltag e betwee n
PC M connecto r terminal s
A13, B1, an d A12 .
PCM CONNECTOR S
Wir e sid e o f femal e terminal s
I s ther e batter y voltage ?
YES
Repai r ope n i n th e wir e
betwee n th e PC M (A13 , B1 )
an d th e PGM-F I mai n relay .
Replac e th e PGM-F I mai n
relay .
Chec k fo r a n ope n in th e PCM :
1. Tur n th e ignitio n switc h OFF .2. Measur e voltag e betwee n
PC M connecto r terminal s A 4
an d A1 2 whe n th e ignitio nswitch i s firs t turne d o n fo r 2seconds .
I s ther e 1.0 V o r less ?
YES
Substitut e a known-goo d PC Mand rechec k (se e pag e 11-42 fo r
immobilize r information) . I f pre -
scribe d voltag e i s no w available ,
replac e th e origina l PCM .
Chec k th e PGM-F I mai n rela y
(se e pag e 11-146 ).N O
NO
ProCarManuals.com

Intake Air System

System Description

The system supplies air for all engine needs. It consists of the intake air pipe. Air Cleaner, intake air duct. Throttle Body,

Idle Air Control (IAC) Valve, idle air control thermal valve, and intake manifold.

A resonator in the intake air pipe provides additional silencing as air is drawn into the system.

IMRC SOLENOID VALVE 2

IMRC

SOLENOID

VALVE 1
IMRC

VACUUM

TANK

From No. 20 ECU

(PCM)
(20 A)

FUSE

(in the under-dash

fuse/relay box)

IMRC

DIAPHRAGM

VALVE 1
VARIOUS

SENSORS

THROTTLE BODY
INTAKE

AIR

DUCT
INTAKE

MANIFOLD
IDLE

ADJUSTING

SCREW
With

TCS

IDLE AIR

CONTROL

THERMAL

VALVE
IAC

VALVE
From PGM-FI

MAIN RELAY

IMRC

DIAPHRAGM

VALVE 2
IMRC

CHECK

VALVE

ENGINE

COOLANTProCarManuals.com

Emission Control System

Exhaust Gas Recirculation (EGR) System

Description

The EGR system is designed to reduce oxides of nitrogen emissions (NOx) by recirculating exhaust gas through the EGR

valve and the intake manifold into the combustion chambers. It is composed of the EGR valve, EGR valve vacuum control

valve, EGR valve vacuum control solenoid valve, PCM and various sensors.

The PCM contains memories for ideal EGR valve lifts for varying operating conditions. The EGR valve position sensor

detects the amount of EGR valve lift and sends the information to the PCM. The PCM then compares it with the ideal EGR

valve lift which is determined by signals sent from the other sensors. If there is any difference between the two, the PCM

cuts current to the EGR valve vacuum control solenoid valve to reduce vacuum applied to the EGR valve.

EGR VALVE

POSITION SENSOR
INTAKE MANIFOLD

From No. 20 ECU (PCM)

(20 A) FUSE

(in the under-dash

fuse/relay box)

VARIOUS

SENSORS

EGR VALVE

EGR VALVE

VACUUM

CONTROL

SOLENOID

VALVE
EGR VALVE

VACUUM

CONTROL

VALVEProCarManuals.com

Evaporative Emissio n (EVAP ) Control s
Descriptio n
Th e evaporativ e emissio n control s ar e designe d t o minimiz e th e amoun t o f fue l vapo r escapin g t o th e atmosphere . Th e
syste m consist s o f th e followin g components :
A . Evaporativ e Emissio n (EVAP ) Caniste r
A n EVA P caniste r i s use d fo r th e temporar y storag e o f fue l vapo r unti l th e fue l vapo r can be purge d fro m th e EVA P
caniste r int o th e engin e an d burned .
B . Vapo r Purg e Contro l Syste m
EVA P caniste r purgin g is accomplishe d b y drawin g fres h ai r throug h th e EVA P caniste r an d int o a por t o n th e throttl e
body . Th e purgin g vacuu m is controlle d b y th e EVA P caniste r purg e valve .
EVA P CANISTE R PURG E VALV E DUT Y CONTROLLE D AFTE R START -
IN G ENGIN E
*: '9 6 - 9 9 model s*1: '0 0 - 0 1 model sC. Fue l Tan k Vapo r Contro l Syste m
Whe n fue l vapo r pressur e in th e fue l tan k is highe r tha n th e se t valu e o f th e EVA P tw o wa y valve , th e valv e open s an d
regulate s th e flo w o f fue l vapo r t o th e EVA P canister .
Durin g refueling , th e fue l tan k vapo r contro l valv e open s wit h th e pressur e in th e fue l tank , an d feed s th e fue l vapo r t o
th e EVA P canister .
'96 - 9 9 models :
FUELTANKPRESSURESENSOR
EVAPTWO WAYVALVE
FUEL TANKEVAP VALVE
FUEL TAN K
EVAP CANISTE RPURGE VALV E
EVAPBYPAS SSOLENOI DVALVE
EVAPCANISTE RVENT SHU T VALV EEVAP CONTRO LCANISTER
EVAPTHRE EWAYVALV E
FUEL FIL LCAP
Fro mNo. 2 0 EC U (PCM )(20 A ) FUS E(in th e under-das hfuse/relay box )
VARIOU SSENSOR S
ENGINE COOLAN T TEMPERATUR E ABOV E 99° F (37°C) * 140° F (60°C)*1
ProCarManuals.com

Emission Control System

Evaporative Emission (EVAP) Controls (cont'd)

'00 - 01 models:

From

No. 20 ECU
(PCM)

(20 A) FUSE

(in the under-dash

fuse/relay box)

FUEL TANK VAPOR

RECIRCULATION

TUBE
EVAP

BYPASS

SOLENOID

VALVE
EVAP

CANISTER

FILTER

EVAP

CANISTER

FUEL TANK VAROR

RECIRCULATION

VALVE
EVAP

TWO WAY

VALVE
FUEL TANK
EVAP

CANISTER

VENT SHUT VALVE
EVAP CANISTER

PURGE VALVE
VARIOUS

SENSORS
INTAKE

MANIFOLD

FUEL

TANK

PRESSURE

SENSOR
FUEL TANK

VAPOR CONTROL

VALVE

FUEL

FILL

CAP
FUEL TANK

VAPOR

SIGNAL

TUBEProCarManuals.com

PCM Rese t Procedur e
1 . Mak e sur e yo u hav e th e anti-thef t cod e fo r th e radio , the n writ e dow n th e frequencie s fo r th e radio' s prese t buttons .
2 . Tur n th e ignitio n switc h OFF .
3 . Remov e th e No . 5 6 BAC K UP , RADI O fus e (7. 5 A ) fro m th e under-hoo d fuse/rela y bo x fo r 1 0 second s t o rese t th e PCM .
NOTE :
• Th e A/ T contro l syste m memor y canno t b e cleare d b y usin g th e OB D II Sca n Too l o r Hond a PG M Tester ; b e sur e t o
remov e th e BAC K UP , RADI O fus e t o rese t th e A/ T contro l syste m memory .
• Th e PC M memor y mus t b e rese t afte r reconnectin g th e batter y o r th e BAC K UP , RADI O fus e (se e pag e 11-111 ).
BAC K UP , RADI O(7.5 A ) FUS E
UNDER-HOO DFUSE/RELAY BO XFina l Procedur e
NOTE : Thi s procedur e mus t b e don e afte r an y troubleshooting .
1 . Tur n th e ignitio n switc h OFF .
2 . Disconnec t th e OB D II Sca n Too l o r Hond a PG M Teste r fro m th e Dat a Lin k Connecto r (16P) , o r remov e th e specia l too l
fro m th e Servic e Chec k Connector .
3. Rese t th e PCM .
4. Tur n th e ignitio n switc h O N (II) .
5 . Ente r th e anti-thef t cod e fo r th e radio , the n ente r th e customer' s radi o statio n presets .
6 . Memoriz e th e engin e idl e spee d signa l i n th e PC M (se e pag e 11-111 ).
ProCarManuals.com

Troubleshooting Flowchar t — Indicato r Ligh t Doe s No t Com e O n
Is th e specia l too l (SC S Servic e
Connector ) connecte d t o th e
servic e chec k connector ?
Check th e Indicato r Light :Shift t o position .
Does th e indicato r ligh t
com e on ?
Chec k th e Groun d Circuit :
1. Tur n th e ignitio n switc h OFF .2. Disconnec t th e A (26P ) an d B(16P ) connector s fro m th ePCM .3. Chec k fo r continuit y betwee nthe A2 6 termina l an d bod ygroun d an d th e B 9 termina land bod y ground .
Is ther e continuity ?
Measur e Powe r Suppl y Circui t
Voltage :
1 . Tur n th e ignitio n switc h O N (II) .
2 . Measur e th e voltag e betwee n
terminal s A1 3 an d A2 6 an d
betwee n terminal s B 1 an d B9 .
I s ther e batter y voltage ?
T o pag e 14-8 0 Disconnec
t th e specia l too l fro m
th e servic e chec k connecto r an d
recheck .
Check fo r loos e PC M connectors .
I f necessary , substitut e a known -
goo d PC M an d recheck .
PCM CONNECTOR S
Wir e sid e o f femal e terminal s
Repai r ope n i n th e wire s betwee n
th e A2 6 o r B 9 terminal s an d G101 .
Repai r ope n o r shor t i n th e wir e
betwee n th e A1 3 and/o r B 1 termi -
nals , th e PGM-F I mai n relay , an d
th e fus e box .
The indicato r ligh t doe s no t
com e o n whe n th e ignitio n switc h
i s firs t turne d O N (II) . (I t shoul d
com e o n fo r abou t 2 seconds. )
Chec k th e Servic e Chec k Con -
nector :
Mak e sur e th e specia l too l (SC S
Servic e Connector ) i s no t con -
necte d t o th e servic e chec k con -
nector .
ProCarManuals.com