INSPECTION PROCEDURES [P] Preparation [C] Check
Does SRS warning light turn off?
(1) Turn ignition switch to LOCK.
(2) Disconnect negative (±) terminal cable from the
battery, and wait at least 90 seconds.
(3) Disconnect center airbag sensor assembly
connector.
(4) Connect negative (±) terminal cable to battery.
Check operation of SRS warning light.
Replace center airbag sensor assembly.
Check SRS warning light circuit or terminal AB cir-
cuit of DLC1 or DLC2.
± SUPPLEMENTAL RESTRAINT SYSTEMTROUBLESHOOTINGRS±97
![TOYOTA SUPRA 1995 Service Repair Manual INSPECTION PROCEDURES [P] Preparation [C] Check
Does SRS warning light turn off?
(1) Turn ignition switch to LOCK.
(2) Disconnect negative (±) terminal cable from](/manual-img/14/57468/w960_57468-1779.png "TOYOTA SUPRA 1995 Service Repair Manual INSPECTION PROCEDURES [P] Preparation [C] Check
Does SRS warning light turn off?
(1) Turn ignition switch to LOCK.
(2) Disconnect negative (±) terminal cable from")