EXTERIOR PROTECTION
Luggage compartment lid embellishers.
55PLuggage compartment lid embellishers.
REMOVAL
After removing the emergency spare wheel,
remove the lower mounting bolts (A).Protect the luggage compartment lid using masking
tape and then release the embellisher using the
unclipping pliers (six clips).
Disconnect the registration plate light connector.
REFITTING
To refit, proceed in the reverse order to removal.
17600R
17602S
17601S
55-16
H
EXTERIOR ACCESSORIES
Rear wing corner extender
56P
156EXTERIOR ACCESSORIES
Rear wing corner extender
REMOVAL
Remove:
– the rear light,
– the two mounting bolts (A).
– the lower clip using a small flat screwdriver,
– the upper clip using the special clamp.Extender embellisher (B)
It is possible to remove this part, which avoids masking
before painting.
Apply pressure to the retaining brackets (C).
At the same time pull on the part which is held by the
double sided adhesive tape (D).
REFITTING
Apply double sided adhesive tape to the front
embellisher before reclipping it.
Check that the seals are positioned correctly (E).
To refit, proceed in the reverse order to removal.
17823R
16879-1R
56-1
A
