Page 49 of 340
Once  the  special  hardware  is  installed,  please  follow  the 
instructions  with it and  these  steps: 2. Snap  one  hook of the  infantkhild  seat  attaching  belt 
near  the  floor  at the  door  side 
of the  seat. 
It will stay on the door,  ready to be  rebuckled for use 
by  adults  or  older  children. 
1-41  
     
        
        Page 50 of 340
3. Put  the belt’s special latch plate  into the vehicle’s 
safety  belt buckle. 4. You can make the belt  longer by tilting the buckle 
and pulling  it along the belt. 
5. Put the restraint  on the  seat.  Follow the instructions 
for the child restraint. 
6. Secure the child in the child restraint as the 
instructions 
say. 
7. Run the belt through  or around the child restraint. 
The  child restraint instructions  will show 
you how. 
1-42  
     
        
        Page 51 of 340
8. Put the hook on  the  free end through  the slot  in the 
latch  plate. 9. To make  it tight, pull the belt while  you push down 
on the child restraint. If the belt  won’t stay tight, 
switch 
it end  for  end. 
10. Push and pull the child restraint in different 
directions  to be  sure 
it is secure. 
1-43  
     
        
        Page 52 of 340
To remove the infanuchild  seat  restraint: 
1. Push  the  button on the safety belt buckle and remove the 
special  latch  plate.  Leave  the  latch  plate on the  special  belt. 
2. Push the spring on the hook near the door and 
remove the special belt. 
3. Put  the  belt away  in a  safe  place in your vehicle, so it 
won’t fly around in a crash and injure  someone. 
4. Remember to  reattach  the automatic belt again, once 
the  child  restraint  is removed.  Be sure 
it isn’t  twisted. 
Larger  Children 
Children who have outgrown child restraints should 
wear the vehicle’s safety belts. 
If you  have the  choice,  a  child should sit next  to  a 
window 
so the child can wear a lap-shoulder belt and 
get the  additional  restraint a  shoulder  belt can provide. 
1-44  
     
        
        Page 53 of 340
Accident  statistics show that children are safer if they 
are  restrained  in the  rear seat. But they need to use the 
safety belts properly. 
Children who aren’t buckled up can be thrown  out in 
0 Children who aren’t buckled up can strike other a 
crash. 
people  who are. 
e= 
A: 
What  if  a  child is wearing  a  lap-shoulder  belt, 
but  the  child  is 
so small  that  the  shoulder  belt  is 
very close  to  the  child’s  face  or  neck? 
Move the child toward the center of the vehicle,  but 
be sure that the shoulder belt still 
is on  the  child’s 
shoulder, 
so that  in a crash  the child’s upper body 
would have the restraint that belts provide. 
If the 
child is sitting in a rear  seat outside position, see 
“Rear Safety Belt Comfort Guides”  in the Index. 
If the child  is so small that the shoulder belt  is still 
very  close  to the child’s  face  or neck, you might 
want 
to place the child in the center  seat position, 
the  one  that has only a  lap belt. 
1-45  
     
        
        Page 54 of 340
Wherever  the  child  sits, the lap portion of the belt 
should  be  worn  low  and 
snug on  the  hips, just touching 
the. child’s thighs. This  applies  belt  force to the  child’s 
pelvic  bones  in  a  crash. 
1-46  
     
        
        Page 55 of 340

Safety  Belt  Extender 
If the  vehicle’s safety belt  will fasten around you, you 
should use  it.  The  front  seat lap-shoulder  belts have 
plenty  of extra  length built  in, 
so they will fit almost all 
people. 
But  if a safety belt isn’t long enough  to fasten, your 
retailer will  order you an extender.  It’s free.  When  you 
go  in to  order  it, take  the heaviest  coat  you will  wear, 
so 
the extender will be  long enough  for you.  The extender 
will  be just  for you, and  just  for the seat in your vehicle 
that you  choose. Don’t let someone  else use it, and  use  it 
only  for the seat  it  is made to  fit. To wear  it, just  attach it 
to  the regular  safety belt. 
Checking  Your  Restraint  Systems 
Now  and then, make sure all your belts, buckles, latch 
plates, retractors, anchorages and warning systems are  working properly. 
Look for  any other loose  or damaged 
restraint  system parts.  If you  see anything  that might 
keep  a restraint  system  from doing its  job, have 
it 
repaired. 
Torn  or frayed belts  may not protect you  in 
a crash. 
They  can rip apart under impact forces.  If a belt  is torn 
or  frayed,  get a new  one right away. 
1-47  
     
        
        Page 56 of 340
Replacing  Seat  and  Restraint  System 
Parts  After 
a Crash 
If you’ve had a crash,  do you  need  new belts? 
After  a very minor  collision, nothing may be necessary. 
But  if the  belts were  stretched, as they would be if worn 
during  a more  severe  crash,  then you need  new belts. 
If  you  ever  see  a label on a right  front safety belt that 
says  to  replace  the belt, be  sure 
to do so. Then the  new 
belt  will  be there  to help  protect  you in an  accident. 
You 
would see this  label on the  belt near  the latch plate. 1 
If belts are cut  or  damaged, replace  them. Collision 
damage  also may  mean  you will need 
to have safety belt 
or  seat parts repaired  or replaced.  New parts and repairs 
may  be necessary even  if the belt wasn’t being used  at 
the  time  of the  collision. 
If  your seat adjuster won’t work  after a crash, the special 
part  of the safety belt  that goes through the seat 
to the 
adjuster  may  need  to be  replaced. 
1-48 
-