1995 NISSAN ALMERA N15 ignition

TROUBLEDIAGNOSES
Control Linkage Adjustment (Cont'd)
TEMPERATURE CONTROLCABLE

1. For RHO models, movethetemperature controlknobtothe
full cold position.
For LHO models, movethetemperature controlknobtothe
full hotposition.
2. For RHO models, setthe airmix door lever inthe fullcold
position.
For LHO models, setthe airmix door lever inthe full hot
position.
3. Pull onthe cable cover inthe direction ofthe arrow, then
clamp it.

After positioning controlcable,checkthatitoperates properly.
INTAKE DOORMOTOR

1. Install intakedoormotor onintake unit.
Ensure thattheintake doormotor leverisfitted intotheslit
portion ofintake doorlink.
2. Connect theintake doormotor harness connector.
3. Turn ignition switchtoON.
4. Check thatintake dooroperates properlywhenRECswitch
is turned ONand OFF.

ZHA178A
RHA331F System
Description
INTAKE DOORMOTOR

The intake doormotor isinstalled onthe intake unit.Using a
link itopens andcloses theintake door.
When RECIRCULATION switchisON, theground lineofthe
motor isswitched fromterminal
@
to
@.
This starts themotor
because theposition switchcontacts builtintoitmake current •
flow. When RECIRCULATION switchisOFF, theground lineis •
switched fromterminal
@
to
@.
The contacts turnalong with
the motor. Whentheyreach thenon-current flowposition, the
motor willstop. Themotor always turnsinthe same direction.

LHD:

u:Eh!.IJ

RHD:
o::EhhJ

---I

I

~----j Intake door
molar
HA-65

SECTION

CONTENTS
MAINTENANCE

MA
•

PRECAUTIONS ANDPREPARATION
3

Supplemental RestraintSystem(SRS)"AIR
BAG" (DualAirBag System) 3
Supplemental RestraintSystem(SRS)"AIR
BAG" (Single AirBag System) 3
Special Service Tools 4
Commercial ServiceTool 4

PRE-DELIVERY INSPECTIONITEMS
5

GENERAL MAINTENANCE 6
PERIODIC MAINTENANCE (Exceptfor
Europe) 7
Engine andEmission ControlService 7
Chassis andBody Service 8
Maintenance UnderSevere DrivingConditions 9

PERIODIC MAINTENANCE (ForEurope) 10

Engine Oil
&
Minor Service 10
Engine andEmission ControlService 11
Chassis andBody Services 12
Maintenance UnderSevere Driving Conditions 13

RECOMMENDED LUBRICANTSANDFLUIDS 14

Lubricants andFluids 14
SAE Viscosity Number 15
Anti-freeze CoolantMixtureRatio 16

~ --ll
GA
I I

ENGINE MAINTENANCE 17

Checking DriveBelts 17
Changing EngineCoolant... 19
Checking CoolingSystem 21
Checking FuelLines 22
Changing FuelFilter 22
Cleaning andChanging AirCleaner Filter 23
Changing EngineOil 24
Changing OilFilter 24
Checking andChanging SparkPlugs 25
Checking IgnitionWires 26Changing
PositiveCrankcase Ventilation
(PCV) Filter 26
Checking EVAPVapor Lines 26
Checking OxygenSensor(02S)orHeated
Oxygen Sensor(H02S) 27

~ --ll
SR
I I

ENGINE MAINTENANCE 28

Checking DriveBelts 28
Changing EngineCoolant... 29
Checking CoolingSystem 31
Checking FuelLines 32
Changing FuelFilter 32
Changing AirCleaner Filter 33
Changing EngineOil 33
Changing OilFilter 34
Changing SparkPlugs(Platinum-tipped type)34
Checking IgnitionWires 35
Checking EVAPVapor
&
Purge Lines 36
Checking HeatedOxygen Sensor(H02S) 37

~_~ ..-JI
CD
I I

ENGINE MAINTENANCE
38
Manifold NutCheck 38
Checking DriveBelt 38
Changing EngineCoolant. 38
Checking CoolingSystem .40
Checking FuelLine .40
Changing AirCleaner Filter 41
Water Draining, FuelFilter Check and
Replacement 41
Changing EngineOil .41
Changing EngineOilFilter 42
Checking InjectionNozzle 43
Checking IdleSpeed .44
Replacing TimingBelt 44

PRE-DELIVERYINSPECTIONITEMS
Shown belowarePre-delivery InspectionItemsrequired forthe new vehicle. Itis recommended that
necessary itemsotherthanthose listedherebeadded, payingdueregard tothe conditions ineach
country.

Perform applicable itemsoneach model. Consult textofthis section forspecifications .

UNDER HOOD-engine off

o
Radiator coolantlevelandcoolant hosecon-
nections forleaks

o
Battery fluidlevel, specific gravityandcondi-
tions ofbattery terminals

o
Drive beltstension

D
Fuel filter forwater ordusts, andfuel lines
and connections forleaks
[] Engine oillevel andoilleaks

D
Clutch andbrake reservoir fluidlevel and
fluid lines forleaks

o
Windshield andrear window washerand
headlamp cleanerreservoir fluidlevel

D
Power steering reservoir fluidlevel andhose
connections forleaks

ON INSIDE ANDOUTSIDE

D
Remove frontspring/strut spacer(Ifapplica-
ble)

D
Operation ofall instruments, gauges,lights
and accessories

o
Operation ofhorn(s), wiperandwasher
[] Steering lockforoperation
[] Check airconditioner forgas leaks

o
Front andrear seats, andseat belts foroper-
ation

n
All moldings, trimsandfittings forfitand
alignment

[J
Allwindows foroperation andalignment

n
Hood, trunklid,door panels forfitand align-
ment

[1
Latches, keysandlocks foroperation

rl
Weatherstrips foradhesion andfit

[l
Headlamp aiming
I~ Tighten wheelnuts(Inc. inner nutsifapplica-
ble)
IJ Tire pressure (Inc.spare tire)

Il
Check frontwheels fortoe-in
IJ Install clock/voltmeter/room lampfuse(If
applicable)
~ Install deodorizing filtertoair purifier (If
applicable)
~ Remove wiperbladeprotectors (Ifapplicable)
UNDER
BODY

o
Manual transmission/transaxle, transferand
differential gearoillevel

D
Brake andfuel lines andoil/fluid reservoirs
for leaks

D
Tighten boltsandnuts ofsteering linkageand
gear box,suspension, propellershaftsand
drive shafts
~ Tighten rearbody boltsandnuts (Models with
wooden bedonly)

ROAD TEST

D
Clutch operation

D
Parking brakeoperation

[J
Service brakeoperation

D
Automatic transmission/transaxle shifttiming
and kickdown
[] Steering controlandreturnability

o
Engine performance

D
Squeaks andrattles

ENGINE OPERATING ANDHOT

D
Adjust idlemixture andspeed (andignition
timing*1)

n
Automatic transmission/transaxle fluidlevel
~ Engine idlingandstop knob operation (Diesel
only)

FINAL INSPECTION

n
Install necessary parts(outside mirror,wheel
covers, seatbelts, mat,carpet ormud flaps)

[1
Inspect forinterior andexterior metaland
paint damage
[] Check forspare tire,jack, tools (wheel
chock), andliterature

n
Wash, cleaninterior andexterior

"1: Not required onmodels withadirect ignition system
~ :Not appiicable tothis model.
•

MA-5

PERIODICMAINTENANCE (ExceptforEurope)

The following tablesshowthenormal maintenance schedule.Depending uponweather andatmospheric
conditions, varyingroadsurfaces, individual drivinghabitsandvehicle usage,additional ormore fre-
quent maintenance mayberequired.

Periodic maintenance beyondthelast period shown onthe tables requires similarmaintenance .
Engine andEmission ControlService

•

Abbreviations: I
=
Inspect andcorrect orreplace asnecessary. R

MAINTENANCE OPERATION

Perform eitheratnumber ofkilometers (miles)
or months, whichever comestirst. km
x1,000
(Miles x1,000)
Months
Replace.
A
=
Adjust, C
=
Clean.

MAINTENANCE INTERVAL
10 20 3040
506070
80
Reference page
(6) (12) (18)
(24)(30)(36)(42)(48)
6 12 18
24
3036
42 48
Underhood andunder vehicle GA
SR
Intake
&
exhaust valveclearance (GA15DE
&
GA16DE engines) SeeNOTE (1)
EM41
-

Drive belts
II
MA 17
24
Engine anti-Ireeze coolant(Ethylene glycolbase)(LLC) RRMA 1929
Engine coolant (Softwater) RRR
R

R R

R
RMA
1929
Cooling system
I
I

I
I
MA 2131
Fuel lines
I
I
MA
22
32
Air cleaner filter(Drypaper type)*
CC
C RC CC RMA 23

-

Air cleaner filter(Viscous papertype)* R
RMA
2333
Engine oil(Use APISE,SF.SGorSH oil)*
R

RRRR R
RR
MA 24
33
Engine oilfilter* R
R R
R
R RRRMA
2433
Fuel filter* R
RMA
22
32
Spark plugs(except Platinum-tipped type) R
RMA
25

-

Spark plugs(platinum-tipped type) Replaceevery100,000 km(60.000 miles). MA

-
34
Ignition wires
I

I
MA
2635
PCV filter* R
RMA
26

-

Vapor lines
I

I
MA
26
36
(Heated) OxygenSensor
I

I

MA 2737
NOTE: (1)
If
valve noiseincreases, checkvalveclearance.

*
Maintenance itemswith
"*"
should beperformed morefrequently accordingto"Maintenance undersevere driv-
ing conditions".

MA-7

PERIODICMAINTENANCE (ForEurope)
Engine andEmission ControlService

Abbreviations: I
=
Inspect andcorrect orreplace asnecessary,
R

MAINTENANCE OPERATION

MAINTENANCEINTERVAL

60 90

(36) (54)

Perform
eitheratnumber ofkilometers (miles)
or months, whichever comesfirst. km
x1,000
(Miles x1,000)
Months
Replace,

30
(18)
12 24

36120

(72) 48
Reference
page

•

Underhood andunder vehicle
GA
CD
Engine anti-freeze cootant(Ethylene glycolbase)(LLC)
SeeNOTE (1)
RMA-19
MA-38
Cooling system

I
I

I
I
MA-21 MA-40
Fuel lines
I
I
MA-22
MA-40
Air cleaner filter(Viscous papertype)*
RRMA-23 MA-41
Intake
&
exhaust valveclearance
SeeNOTE (2) EM-41

-

w
Drive
belts
SeeNOTE (3) I

I
I
MA-17,18

-

z

Ci
Fuel
filter* RMA-22

-

z
w
Spark plugs
SeeNOTE (4)
RR
RRMA-25

-

w
z
Ignition wires'
IMA-26

:::;
-

0

(fJ
PCVfilter* RRMA-26

-

<{

Cl
Vapor lines(Hoses, connections, etc.)
SeeNOTE (5) IIMA-26

-

(Heated) oxygensensor'
I
IMA-27

-

Fuel filter
RR

-
MA-41

--,w
wz
Nozzles SeeNOTE (6)

-
MA-43

(fJ-

wCl
-z
EM-120,

Ow

Timing beltsforcamshalt andinjection pump Replaceevery90,000 km(54,000 miles)

-

124
'. Except forSwedish models

NOTE: (1)Replace atthe first 90,000 km(54,000 miles)or60 months, thenevery 60,000 km(36,000 miles)or24 months, which-
ever comes first.
(2)
If
valve noise Increases, checkvalveclearance.
(3) After 60,000 km(36,000 miles)or24 months, inspectevery30,000 km(18,000 miles)or12 months, whichever comes
first.
(4) For Swedish models,performalmileage intervalonly.
(5) For Swedish models,inspectalthe first 90,000 km(54,000 miles),andthen every 60,000 km(36,000 miles)or24
months, whichever comesfirst.
(6)
If
engine powerdecreases, blacksmoke isemitted orengine noiseincreases, checkand,ifnecessary, adjustthe
fuel injection nozzle'sstartingpressure andthefuel spray pattern.

*
Maintenance itemswith
"*"
should beperformed morefrequently accordingto"Maintenance UnderSevere Driv-
ing Conditions".
MA-11

ENGINEMAINTENANCE @KJ
Changing FuelFilter (Cont'd)

1. Remove fuseforfuel pump.
2. Start engine.
3. After engine stalls,crankengine twoorthree times tomake
sure thatfuel pressure isreleased. •
4. Turn ignition switchoffand install fuseforfuel pump.
i

AECBBO
5.Loosen fuelhose clamps.
6. Replace fuelfilter.

• Becareful nottospill fuelover engine compartment. Place
a shop towel toabsorb fuel.
• Use ahigh-pressure typefuelfilter. Donot use asynthetic
resinous fuelfilter.
• When tightening fuelhose clamps, refertoChecking Fuel
Lines.
Cleaning andChanging AirCleaner Filter
VISCOUS PAPERTYPE
The viscous papertypefilter does notneed cleaning between
renewals.
DRY PAPER TYPE
Clean orreplace element moreoftenunder dustydriving con-
ditions.
SMA384C MA-23

ENGINEMAINTENANCE ~
Changing OilFilter (Cont'd)

2. Before installing newoilfilter, clean theoilfilter mounting
surface oncylinder block,andcoat therubber sealofoil fil-
ter with alittle engine oil.

SMA010
•

2/3 ofaturn
g 16
mm

(0.63 In) SMA302CA
Wrench withamagnet
to hold spark plug
SMA294A
3.
Screw inthe oilfilter untilaslight resistance isfelt, then
tighten anadditional 2/3turn.
4. Add engine oil.

Refer toChanging EngineOil.
• Clean excess oilfrom engine.
Checking andChanging SparkPlugs

1. Disconnect ignitionwiresfromspark plugsatboot. Donot
pull onthe wire.
2. Remove sparkplugswithspark plugwrench.
3. Clean plugsinsand blastcleaner.
4. Check insulator forcracks orchips, gasket fordamage or
deterioration andelectrode forwear andburning. Ifthey are
excessively wornaway, replace withnewspark plugs.
5. Check sparkpluggap.

Spark plug:
GA16DE&GA14DE engine GA16DE
&GA15DE engine
for Europe andIsrael except
forEurope and
Israel
Type Standard BKR5E
BKR5E-11
Cold BKR6E,BKR7E BKR6E-11,
BKR7E-11
Plug gap mm(in) 0.8
-0.9 1.0-1.1
(0.031 -0.035) (0.039-0.043)
MA-25

SMA476

Side
electrode

It, ENGINE
MAINTENANCE ~
Checking andChanging SparkPlugs(Cont'd)

6. Install sparkplugs. Reconnect ignitionwiresaccording to
nos. indicated onthem.

Spark plug:
~: 20-29 N'm (2.0-3.0 kg-m, 14-22 ft-Ib)
Checking IgnitionWires

1. Inspect wiresforcracks, damage, burnedterminals andfor
improper fit.
2. Measure theresistance ofwires andcheck forintermittent
breaks.

SMA813C
Cylinder
No.

2

3

4
Resistance
kQ[at25'C (77'F)]
Approximately 11
Approximately 10
Approximately 8
Approximately 6.5

If itexceeds thelimit, replace theignition wirewithanew one.

Changing PositiveCrankcase Ventilation (PCV)
Filter

Remove aircleaner coverandreplace
pev
filter.

Checking EVAPVapor Lines

1. Visually inspectEVAPvapor linesforimproper attachment
and forcracks, damage, looseconnections, chafingand
deterioration.
2. Inspect vacuum reliefvalve offuel tank filler capfor
clogging, sticking,etc.

Refer
10
EVAPORATIVE EMISSIONSYSTEMINSPECTION inEC
section.
MA-26