2023 TOYOTA PRIUS PRIME Owners Manual

6179-1. Specifications
9
Vehicle specifications
*: Table 1  Occupant loading and distributio n for vehicle normal load for
various designated seating capacities
Snow tire
A tire that attains a traction index equal to or
greater than 110, compared to the ASTM E-
1136 Standard Reference Test Tire, when using
the snow traction test as described in ASTM F-
1805-00, Standard Test Method for Single
Wheel Driving Traction in a Straight Line on
Snow-and Ice-Covered Surfaces, and which is
marked with an Alpine Symbol ( ) on at least
one sidewall
Test rim
The rim on which a tire is fitted for testing, and
may be any rim listed as appropriate for use
with that tire
TreadThat portion of a tire that comes into contact
with the road
Tread ribA tread section running circumferentially around
a tire
Tread separationPulling away of the tread from the tire carcass
Treadwear indicators
(TWI)The projections within the principal grooves
designed to give a visual indication of the
degrees of wear of the tread
Wheel-holding fixtureThe fixture used to hold the wheel and tire
assembly securely during testing
Designated seating
capacity, Number of occupantsVehicle normal load,
Number of occupantsOccupant distribution in a normally loaded vehi- cle
2 through 422 in front
5 through 1032 in front, 1 in second seat
11 through 155
2 in front, 1 in second
seat, 1 in third seat, 1 in fourth seat
16 through 207
2 in front, 2 in second
seat, 2 in third seat, 1 in fourth seat
Tire related termMeaning

6189-2. Customization
9-2.Customization
■Changing by using the Mul-
timedia Display
Except for Advanced Park
1 Select on the main menu.
2 Select “Vehicle customize”
on the sub menu.
3 Select the item to change the
settings of from the list.
Various setting can be changed.
Refer to the list of settings that can
be changed for details.
For functions that can be turned
on/off, select (ON)/
(OFF).
For Advanced Park (if
equipped)
1 Press the Advanced Park
main switch. 2
Select on the Multimedia
Display, and then select
“Advanced Park”.
■Changing by using the
multi-information display
Use the meter control switches
to change settings. ( P.162)
1 Operate the meter control
switch to select .
( P.166)
2 Operate the meter control
switches to select the desired
item to be customized.
3 According to the display,
select the desired setting.
To go back to the previous screen
or exit the customize mode, press
.
■During customization
Stop the vehicle in a safe place,
apply the parking brake, and shift
the shift position to P. Also, to pre-
vent 12-volt battery discharge, leave
the hybrid system operating while
customizing the features.
Customizable features
Your vehicle includes a vari-
ety of electronic features
that can be personalized to
your preferences. The set-
tings of these features can
be changed by using the
multi-information display,
the Multimedia Display or at
your Toyota dealer.
Some of the customizable
features are changed in
conjunction with the set-
tings of My Set-
tings.( P.234)
Customizing vehicle fea-
tures
WARNING
■During customization
As the hybrid system needs to be
operating during customization,
ensure that the vehicle is parked
in a place with adequate ventila-
tion. In a closed area such as a
garage, exhaust gases including
harmful carbon monoxide (CO)
may collect and enter the vehicle.
This may lead to death or a seri-
ous health hazard.

6199-2. Customization
9
Vehicle specifications
Some function settings are changed simultaneously with other func-
tions being customized. Contact y our Toyota dealer for further
details.
Settings that can be changed using the Multimedia Display
Settings that can be changed using the multi-information display
Settings that can be changed by your Toyota dealer
Definition of symbols: O = Available,  = Not available
■Predictive efficient drive*1 (P.81)
*1: Vehicles with navigation system*2
*2
: This function can only be used in th e mainland U.S.A. It cannot be used
in other states and territorie s, including Alaska and Hawaii.
■Charging system (P.103, 119, 108)
NOTICE
■During customization
To prevent 12-volt battery dis-
charge, ensure that the hybrid
system is operating while custom-
izing features.
Customizable features
FunctionDefault settingCustomized setting
Predictive efficient driveOnOffO
FunctionDefault settingCustomized setting
Charging currentMAX8AO
Connector lockAuto Lock
Auto Lock & Unlock
O
OFF
“Battery Heater”OnOffO
“Battery Cooler”OnOffO
A
B
C
ABC
ABC

6209-2. Customization
■Gauges, meters and multi-information display (P.155, 161)
Function*1Default settingCustomized
setting
Language*2English
Canadian French
OMexican Span- ish
Units*4miles (MPG US,
miles/kWh)km (km/L, km/kWh)
O*3Okm (L/100km, km/kWh)
Hybrid System IndicatorOnOffO
EV indicator*2OnOffO
EV Drive InformationEV Energy remainingEV Distance remainingO
Eco Guidance (ECO Acceler-
ator Guidance)
*2OnOffO
Fuel EconomyTotal AverageTrip AverageOTank Average
Power ConsumptionTotal AverageTrip AverageO
Audio system linked dis-
play
*2OnOffO
Drive information type*2TripTotalO
Drive information items (first
item)
*2Distance
Average Speed
O
Total Time
Drive information items (sec-
ond item)
*2Total Time
Average Speed
O
Distance
Trip Summary*2Drive InfoCharging
ScheduleO
Pop-up display*2OnOffO
CalendarO*5
ABC

6219-2. Customization
9
Vehicle specifications
*1: For details about each function: P.166
*2: This setting changes in ac cordance with My Settings.
*3: The setting can be changed on “General” of .
*4: The default setting varies according to country.
*5: This can only be set if GPS calibration of clock is turned off in the Multi-
media Display settings.
*6: The setting can be changed on “Notifications” of .
■Door lock ( P.185, 587)
*: This setting changes in accordance with My Settings.
Default settingsO
Convenience Services (Sug-
gestion function)
*2On
On (when the
vehicle is stopped)
O*6O
Off
FunctionDefault settingCustomized setting
Unlocking using a
mechanical key
Driver’s door
unlocked in one step, all doors
unlocked in two step
All doors
unlocked in one step
O
Automatic door locking
function
*
Shift position linked door
locking opera- tionOff
OOSpeed linked door locking operation
Automatic door unlocking
function
*
Shift position linked door
unlocking oper- ationOff
OODriver’s door linked door
unlocking oper- ation
Function*1Default settingCustomized settingABC
ABC

6229-2. Customization
■Rear seat reminder (P.188)
*: This setting changes in accordance with My Settings.
■Smart key system and wireless remote control ( P.185, 191,
203)
*: This setting changes in accordance with My Settings.
■Smart key system ( P.185, 191, 203)
FunctionDefault settingCustomized
setting
Rear seat reminder func-
tion
*OnOffOO
FunctionDefault settingCustomized setting
Operating signal (Buzz-
ers)
*StandardDesired volumeOO
Operation signal (Emer-
gency flashers)
*OnOffOO
Time elapsed before auto-
matic door lock function is
activated if door is not
opened after being
unlocked
*
60 seconds
Off
OO30 seconds
120 seconds
Open door warning
buzzer (When locking the
vehicle)
OnOffO
FunctionDefault settingCustomized setting
Smart door unlocking*1Driver’s doorAll the doorsOO
Smart key systemOnOffO
Time elapsed before
unlocking all the door
when gripping and holding
the driver’s door handle
*2
2 seconds
Off
O1.5 seconds
2.5 seconds
ABC
ABC
ABC

6239-2. Customization
9
Vehicle specifications
*1: This setting changes in accordance with My Settings.
*2: This setting can be changed when the smart door unlocking setting is set
to Driver’s door.
■Wireless remote control ( P.180, 185, 191)
*: This setting changes in accordance with My Settings.
■Power back door*1 ( P.194)
Number of consecutive
door lock operations2 timesAs many as
desiredO
Power switch illuminationOnOffO
FunctionDefault settingCustomized setting
Unlocking operation*
Driver’s door
unlocked in one step, all doors
unlocked in two step
All doors
unlocked in one step
OO
Locking operation when
door opened
*OnOffOO
The function that activates
the switch of the
wireless remote control
when locking the door
( P.194)
On (Unlocking
all the door)
Off
OOn (Unlocking
back door only)
Theft deterrent panic
modeOnOffO
FunctionDefault settingCustomized setting
Power back door operationsOnOffO
Operation buzzer volumeLoudSoftONormal
Opening angle5
1 to 4
O
User setting*2
FunctionDefault settingCustomized settingABC
ABC
ABC

6249-2. Customization
*1: If equipped
*2: The open position is set by the power back door switch. (P.202)
■Enabling easier driver entry and exit (power easy access sys-
tem)
*1 ( P.230)
*1: If equipped
*2: This setting changes in ac cordance with My Settings.
■Power windows (P.227)
switch of the wireless
remote control operationPress and hold
One short press
OPush twice
Off
Power back door open oper-
ation when the back door
opener switch is pressed
OnOffO
Back door closing assistOnOffO
Close & lock (walk away)
functionOnOffO
FunctionDefault settingCustomized setting
Driver’s seat slide move-
ment when exiting the
vehicle
*2Full
Off
OOPartial
FunctionDefault settingCustomized setting
Mechanical key linked
operation (open)OffOnO
Mechanical key linked
operation (close)OffOnO
FunctionDefault settingCustomized settingABC
ABC
ABC