2023 LEXUS NX250 350 Owners Manual

TrailMode(AWDvehicles)
Trail Mode is designed to control the spinning of the drive wheels by integradely controlling 4WD, brake and drive force control systems. Use the Trail Mode when driving bumpy roads, etc.

DAC(Downhillassistcontrolsystem)*
The downhill assist control system helps to prevent excessive speed on steep
downhill slopes. The system will operate when the vehicle is traveling under 18 mph (30 km/h) with the accelerator and brake pedals released.
Press the kDACy switch.
The downhill assist control system indicator will
comes on and the system will operate. When
the system is in operation, the slip indicator will
flash, and the stop lights/high mounted stop lights
will be lit. A sound may also occur during the
operation. This does not indicated a malfunction.
Press the kDACy switch while the system is in operation.
The downhill assist control system indicator will flash as the system gradually ceases operation, and will turn off when the system is fully off. Press the kDACy
switch while the downhill assist control system indicator is flashing to start the system again.INFORMATION

system indicator stays on and the "Traction Control Turned OFF" goes off. (The vehicle
can be driven normally during this time.)

Brakeholdsystem
BrakeholdsystemWARNING

3-9.Brakeholdsystem
246