Vehicle Information, Consumer Information and Reporting Safety Defects
2-12
ItemWeight of volume Classification
Refrigerant 22.05±0.88 oz. (625±25 g) R-1234yf
Compressor lubricant 3.52±0.35 oz. (100±10 g) PAG
Contact an authorized retailer of Genesis Branded products for more details.
VEHICLE WEIGHT AND LUGGAGE VOLUME
Item 2.5 T-GDI
3.5 T-GDI
2WD AWD AWD
Gross vehicle weight 5357 lbs.
(2430 kg) 5501 lbs.
(2495 kg) 5710 lbs.
(2590 kg)
Luggage volume (SAE)
Min. Max.
28.9 cu ft. (819 ℓ) 56.9 cu ft. (1610 ℓ)
Min : Behind rear seat to upper edge of the seat back.
Max : Behind front seat to roof.
AIR CONDITIONING SYSTEM
02
2-13
To help achieve proper engine and powertrain performance and durability, use only
lubricants of the proper quality. The correct lubricants also help promote engine
efficiency that results in improved fuel economy.
These lubricants and fluids are recommended for use in your vehicle.
LubricantVolume Classification
Engine oil *1 *2
Recommends 2.5 T-GDI
6.5 US qt. (6.2 ℓ) API SN PLUS /SP or ILSAC GF-6 *3
SAE: 0W-30
3.5 T-GDI7.4 US qt. (7.0 ℓ)API SN PLUS/SP or ILSAC GF-6 *3
SAE: 0W-30
Automatic transmission fluid 9.7 US qt. (9.2 ℓ)GS ATF SP-IV-RR, Genesis/HYUNDAI
genuine ATF SP-IV-RR or other brands
meeting the above specification
approved by Genesis Customer Care
Engine coolant 2.5 T-GDI
9.1 US qt. (8.6 ℓ)
Mixture of antifreeze and water
(Phosphate-based Ethylene glycol
coolant for aluminum radiator)
3.5 T-GDI
10.2 US qt. (9.7 ℓ)
Liquid-cooled
intercooler
coolant 2.5 T-GDI
1.56 US qt. (1.48 ℓ)
3.5 T-GDI 1.56 US qt. (1.48 ℓ)
Brake fluid
*4As required SAE J1704 DOT0-4LV, FMVSS116 DOT-
4, ISO4925 CLASS-6
Front differential oil (AWD)
*50.71±0.026 US qt. (0.67±0.025 ℓ) HYPOID GEAR OIL API GL-5 SAE
75W/85
(SK HK SYN GEAR OIL 75W85 FM
PLUS OR EQUIVALENT)
Rear differential oil
*51.27±0.05 US qt. (1.2±0.05 ℓ) HYPOID GEAR OIL API GL-5 SAE
75W/85
(SK HK SYN GEAR OIL 75W85 FM
PLUS OR EQUIVALENT)
Transfer case oil (AWD) Gear/Clutch :
0.44 ± 0.022 US qt.
(0.42 ± 0.021 ℓ) Actuator :
0.28 ± 0.011 US qt. (0.27 ± 0.010 ℓ) SHELL TF0870B
e-LSD oil 0.43 ± 0.016 US qt.
(0.41 ± 0.015 ℓ) SHELL TF0870C
Fuel 17.43 US gal. (66 ℓ)Refer to “Fuel requirements” in
chapter 1.
RECOMMENDED LUBRICANTS AND CAPACITIES
Vehicle Information, Consumer Information and Reporting Safety Defects
2-14
*1 : Refer to the recommended SAE viscosity numbers on the next page.
*2 : Engine oils labeled Energy Conserving Oil are now available. Along with other additional
benefits, they contribute to fuel economy by reducing the amount of fuel necessary
to overcome engine friction. Often, these improvements are difficult to measure in
everyday driving, but in a year’s time, they can offer significant cost and energy savings.
*3 : Requires < API SN PLUS (or above) full synthetic> grade engine oil. If a lower grade
engine oil (mineral oil including Semi-synthetic) is used, then the engine oil and engine
oil filter must be replaced as indicated for severe maintenance conditions.
*4 : To maintain the best braking performance and ABS/ESC performance, we recommend
that you use genuine brake fluid that conform to specifications.
*5 : If the front/rear differential is submerged, we recommend that you visit an authorized
retailer of Genesis Branded products to replace the differential oil.
Recommended SAE Viscosity Number
CAUTION
Always be sure to clean the area around any filler plug, drain plug, or dipstick before
checking or draining any lubricant. This is especially important in dusty or sandy
areas and when the vehicle is used on unpaved roads. Cleaning the plug and dipstick
areas will prevent dirt and grit from entering the engine and other mechanisms that
could be damaged.
Engine oil viscosity (thickness) has an effect on fuel economy and cold weather
operating (engine start and engine oil flowability). Lower viscosity engine oils can
provide better fuel economy and cold weather performance, however, higher viscosity
engine oils are required for satisfactory lubrication in hot weather. Using oils of any
viscosity other than those recommended could result in engine damage.
When choosing an oil, consider the range of temperature your vehicle will be operated
in before the next oil change. Proceed to select the recommended oil viscosity from
the chart.
Temperature Range for SAE Viscosity Numbers
Temperature °C
-30-20-10 010 20 30 4050
(°F) -10020 40 60 80 100120
Gasoline Engine Oil
0W-30 0W-30
An engine oil displaying this American Petroleum Institute (API) Certification Mark conforms to the International Lubricant
Specification Advisory Committee (ILSAC). It is recommended to
only use engine oils that uphold this API Certification Mark.