2022 LEXUS NX300h Owners Manual

IfthebackdoorcannotbeopenedThe back door can be unlocked from the inside.
1 Using a flathead screwdriver, remove the
cover.
To protect the cover, place a rag between the flathead screwdriver and the cover as shown in the illustration.
Vehicles without a power back door:
2 Turn the cover.
3 Using a screwdriver, push the lever.
Vehicles with a power back door:
4 Loosen the screw and turn back the cover.9-5.Ifadoorcannotbeopenedorlocked6799
When trouble arises

5Using a screwdriver, push the lever.
9-5.Ifadoorcannotbeopenedorlocked680

Ifthemoonrooforelectronicsunshadedoesnotoperatecorrectly
Ifthemoonroofdoesnotoperatecorrectly
Ifthemoonroofclosesbutthenre-opensslightly
1Stop the vehicle.
2 Press and hold the
switch. *1
The moon roof will close, reopen and pause for approximately 10 seconds. *2
Then it will close again, tilt up and pause for approximately 1 second. Finally, it will tilt
down, open and close.
3 Check to make sure that the moon roof completely stops and then release
the switch.
If the moon roof does not fully close even after performing the above procedure
correctly, have the vehicle inspected by your Lexus dealer.
Ifthemoonrooftiltsdownbutthentiltsbackup
1 Stop the vehicle.
2 Press and hold the
switch until the moon roof moves into the tilt up
position and stops. *3
3 Release the switch once and then press and hold the
switch again. *3
The moon roof will pause for approximately 10 seconds in the tilt up position. *4
4 Check to make sure that the moon roof is completely closed and then
release the switch.
If the moon roof does not fully close even after performing the above procedure
correctly, have the vehicle inspected by your Lexus dealer.
*1 : If the switch is released at the incorrect time, the procedure will have to be performed
again from the beginning.
*2 : If the switch is released after the above mentioned 10 second pause, automatic
operation will be disabled. In that case, press and hold the
or switch, and
the moon roof will tilt up and pause for approximately 1 second. Then it will tilt down,
open and close. Check to make sure that the moon roof is completely closed and then release the switch.
*3 : If the switch is released at the incorrect time, the procedure will have to be performed
again from the beginning.
*4 : If the switch is released after the above mentioned 10 second pause, automatic
operation will be disabled. In that case, press and hold the
or switch, and
the moon roof will tilt up and pause for approximately 1 second. Then it will tilt down,
open and close. Check to make sure that the moon roof is completely closed and then release the switch.
9-6.Ifthemoonrooforelectronicsunshadedoesnotoperatecorrectly6819
When trouble arises

Ifthepanoramicmoonroof/electronicsunshadedoesnotoperatecor-
rectly
Initializepanoramicmoonroof/electronicsunshade
1 Stop the vehicle.
2 Turn the power switch to ON.
3 Slide and hold the
switch or switch forward. Continue pressing
the switch for approximately 10 seconds after the panoramic moon roof
or electronic sunshade closes and reopens. The panoramic moon roof and
electronic sunshade will start to close. *1
4 Check that the panoramic moon roof and electronic sunshade are fully
closed and release the switch.
If the moon roof does not fully close even after performing the above procedure
correctly, have the vehicle inspected by your Lexus dealer.
*1 : If the switch is released at the incorrect time, the procedure will have to be performed
again from the beginning.
9-6.Ifthemoonrooforelectronicsunshadedoesnotoperatecorrectly682

Iftherearseatsdoesnotoperatecorrectly
Initializerearseats(Vehicleswithapowerbackdoor)1 Check that the seat is free of obstructions.
2 Fold down the seat to be initialized.
3 Press and hold the
switch of the switch in the luggage compartment for
the seat to be initialized.
4 Within 10 seconds, press the
switch of the second seat switch 5 times.
5 After 10 seconds, after a buzzer sounds 3 times, release the
switch of the
switch in the luggage compartment.
6 Press the
switch of the switch in the luggage room or the switch of the
switch in the luggage room or second seat switch to return the seatback.
During the seatback return operation, the seatback will move automatically and a
buzzer will sound.
A buzzer will sound twice when the operation is complete.
If the buzzer does not stop sounding after performing the previous procedure, have
the vehicle inspected by your Lexus dealer.
9-7.Iftherearseatsdoesnotoperatecorrectly6839
When trouble arises

Ifrefuelingcannotbeperformed
IfthefuelfillerdoorcannotbeopenedIf the fuel filler door opener switch cannot be operated, contact your Lexus
dealer to service the vehicle. In case where refueling is urgently necessary, the
following procedure can be used to open the fuel filler door.
1 Remove the cover inside the luggage com-
partment by inserting a screwdriver.
When removing the cover, to prevent damage,
cover the tip of the screwdriver with a rag.
2 Pull the lever.
Using the lever to open the fuel filler door may not allow for an adequate reduction in fuel tank
pressure before refueling. To prevent fuel from
spilling out, turn the cap slowly when removing it.
During refueling, fuel may spill out from the
filler opening due to air being discharged from
inside the fuel tank. Therefore, fill the fuel tank carefully and slowly.9-8.Ifrefuelingcannotbeperformed684

Ifanindicatoronaninteriorfeatureilluminatesorflashes
Whenthewirelesschargeroperationindicatorlight(onthechargingtray)flashes *
Whenthewirelesschargerindicatorlightcontinuouslyflashesonceper
second(orange/green)
CauseRemedy
Poor communication
between the vehicle
and wireless charger.
If the hybrid system is operating, stop the hybrid system
and then restart it.
If the power switch is in ACC, start the hybrid system.
Also, if a case or cover is installed to the portable device,
remove it.
Whenthewirelesschargerindicatorlightcontinuouslyflashes3times
quickly(orange)
CauseRemedyThe following causes are possible.

Whenthewirelesschargerindicatorlightcontinuouslyflashes4timesquickly(orange)CauseRemedyThe temperature inside the
wireless charger may have
become too high.Stop charging, remove the portable device from
the charging tray, and wait for the temperature to decrease before attempting to begin charging
again.
9-9.Ifanindicatoronaninteriorfeatureilluminatesorflashes686