2022 LEXUS NX300h Owners Manual

3Select perpendicular parking (forward/re-
verse) function or parallel parking function.
Only parking spaces for which assist can be per-
formed are displayed.
4 Select the parking direction.
When perpendicular parking (forward/reverse) was selected in step 3
When parallel parking was selected in step 3
5 Using the arrow buttons, adjust the position
of the parking space to be registered, and
then select [OK@ button.
6-2.Usingthesafedrivingsupportfunctions4636
Driving support system

6Select [Start@ button.
A buzzer will sound, an operation message will
be displayed on the multi-information display, an-
dassistance will begin operating. When the brake
pedal is released, "Moving Forward..." will be dis-
played and the vehicle will begin moving forward.
If you feel that the vehicle is approaching close to
a surrounding vehicle, object, person, or gutter:

W P.453
7 Perform operations as indicated by the advice displays until the vehicle stops in
the target parking space.
8 Check the position that the vehicle has stopped. If necessary, adjust the posi-
tion of the parking spot to be registered using the arrow buttons, and then select [Reg.@ button.
"Registration Completed" will be displayed on the center display.

AApproximately 3.3 ft. (1 m)
2 Press the Advanced Park main switch and
check that a possible parking space is dis-
played on the center display.
If the [ MODE @ button is displayed, the button
can be touched to change between the memory
function, perpendicular parking (forward/reverse)
function and parallel parking function.
3 Select the desired parking space, and then select [Start@ button.
Perform the procedure for the perpendicular parking (forward/reverse) function from
step3.
W P.453INFORMATION

NOTICE
RWhen there are leaves, garbage, or other objects which will likely move, in the
parking space
R When the road surface around the parking space has the same repeating
pattern (brick, etc.)

NOTICERWhen the road surface around the parking space has the same repeating
pattern
R When there is a low protrusion on the road surface near the parking space
R When the parking space is on a slope
R When a camera has been splashed by hot or cold water and the lens has
fogged up
R When a camera lens is dirty or covered with water droplets
R When accessories which obstruct the view of the camera are installed
If assistance is ended during registration, perform registration again.

3Select the button and then select [Perpendicular/parallel@ .
4 Select [OK@ button.
5 Exit the vehicle while carrying the electronic key and smartphone, and then
start the Remote Park app on the smartphone.
The detection area of the electronic key is within approximately 9.8 ft.(3 m) around the vehicle.
If there is an obstruction in the path of the vehicle, move it before parking the vehicle. A
corn can also be moved after exit the vehicle.
6 From outside of the vehicle, confirm the parking space on the screen of the
smartphone and then select the start button.
Start operation of Remote control function while standing approximately 1.6 ft. (50 cm)or more from the vehicle and out of the path of the vehicle.
7 Checking the safety of the area around the vehicle, trace the operation area on
the screen of the smartphone continuously, the vehicle will move and parking
assistance will be performed.
If operation of the screen of the smartphone is stopped, assistance can be suspended
and the vehicle can be stopped. The doors are automatically locked before the vehicle
starts moving.
8 When the parking space is reached, after the vehicle is stopped by the parking
brake, the shift position will be changed to P, the power switch will be turned off,
and the doors will be locked.
A completion screen will be displayed on the smartphone.INFORMATION

1Stop the vehicle at the location you would like
to start assistance.
2 Press the Advanced Park main switch.
: P.450
3 Select
and then select [Forward/reverse@ .
4 Select [OK@ .
5 Exit the vehicle while carrying the electronic key and smartphone, and then
start the Remote Park app on the smartphone.
The detection area of the electronic key is within approximately 9.8 ft. (3 m) around the vehicle.
6 From outside of the vehicle, confirm the direction of travel on the screen of the
smartphone and then select the start button.
Start operation of Remote control function while standing approximately 1.6 ft. (50 cm)or more from the vehicle and out of the path of the vehicle.The detection area of the
electronic key is within approximately 9.8 ft. (3 m) around the vehicle.
7 Checking the safety of the area around the vehicle, trace the operation area on
the screen of the smartphone continuously, the vehicle will move and parking
assistance will be performed.
If operation of the screen of the smartphone is stopped, assistance can be suspended
and the vehicle can be stopped.After assistance has been started, it can be stopped
part way or the direction of travel of the vehicle can be changed.
8 Select the power button on the screen of the smartphone. The power switch
will then turn OFF and the doors will lock automatically.
INFORMATION