2022 LEXUS NX300h Owners Manual

WARNINGIf a child which is not large enough to correctly wear a seat belt is to ride in the vehicle,use a child restraint system.

WARNINGthe front passenger seat, move the seat as far back as possible, and raise the seat to
the upper most position, even if the "AIR BAG OFF" indicator light is illuminated. If
the head restraint interferes with the child restraint system installation and the head
restraint can be removed, remove the head restraint.

Selectinganappropriatechildrestraintsystem(forPuertoRico)
Precautionsforselectingachildrestraintsystem
To ensure safety, observe the following when using a child restraint system.

INFORMATIONLexus recommends the use of a Lexus genuine child restraint system, as they meet strictquality standards.
Lexus genuine child restraint systems are made specifically for Lexus vehicles. For details,
refer to the Lexus web site or contact your Lexus dealer.
Childrestraintsystemcompatibilitywitheachseatingposition
Seating positionSeat position number (1)(2)(3) (2)(3) (2)(3) (2)(3)
Seating position
suitable for uni-
versal belted
(Yes/No) (4)Yes
Forward-facing
only
YesYesYes
i-Size seating
position
(Yes/No)
NoYesNoYes
Seating position
suitable for lat-
eral fixture
(L1/L2/No)
NoNoNoNo1-4.Preparationsforsafedrivingwithchildreninthevehicle431
Before driving

Seating positionSeat positionnumber (1)(2)(3) (2)(3) (2)(3) (2)(3)
Suitable rear-
ward facing fix-
ture
(R1/R2X/R2/R
3/No)
NoR1, R2X, R2, R3NoR1, R2X, R2, R3
Suitable for-
ward facing fix-
ture
(F2X/F2/F3/N
o)
NoF2X, F2, F3NoF2X, F2, F3
Suitable junior
seat fixture
(B2/B3/No)
NoB2, B3NoB2, B3
(1) Move the front seat fully rearward. If the passenger seat height can be adjusted, move
it to the upper most position.
(2) Raise the seatback to be as upright as possible and reduce the gap between the child
restraint system and seatback.
1-4.Preparationsforsafedrivingwithchildreninthevehicle44

(3)If the head restraint interferes with your child restraint system, and the head restraint
can be removed, remove the head restraint. Otherwise, put the head restraint in the
upper most position.
(4) All universal categories (group 0, 0+, I, II and III).

Installationfixturelist
ISOFIX child restraint systems are divided into different "fixture" types. Select afixture type according to the position where the child restraint system is to beinstalled. Refer to the following table for the "fixture" types.